1967 Dodge Charger-Cornet FSM Service Manual

Description

1967 Dodge Charger Cornet FSM Service Manual – PDF DOWNLOAD

Customer Support: [email protected]

Image Preview:.

Description:

1967 Dodge Charger Cornet FSM Service Manual – PDF DOWNLOAD

• Lubricants-Greases Semi-solid grease lubricants, such as specified for propeller shaft universal joints, bear the NLGI designation. They are further classified as grades “0” or “2.” H OlSTl NG Post Type Special care should be taken when raising the vehicle on a frame contact type hoist. The hoist must be equipped with the proper adapters in order that the vehicle will be supported in the correct locations (Figs. 3 and 4). Conventional hydraulic hoists may be used after determining that the adapter plates will make firm contact with the lower control arms and the rear axle housing.
• Floor Jack A regular floor jack may be used under the rear axle housing, or under the front suspension lower control arms, however, a floor jack must never be used on any parts of the underbody. CAUTION: Do not attempt to raise one entire side of the vehicle by placing a jack midway between the front and rear wheels. This practice may result in permanent damage to the body.
• Bumper Jack The bumpers are designed to accept a bumper jack in an emergency, if it becomes necessary to change a tire on the road. Notches are provided in the bumpers for the purpose of raising the vehicle with the bumper jack. CHASSIS LUBRICATION Front Suspension Bafl Joints The front suspension ball joints (Figs. 5 and 6) are semi-permanently lubricated with special lubricant at the factory.
• Relubrication is required every 3 years or 36,000 miles, whichever occurs first. The ball joints, however, should be inspected every six months, or whenever vehicle is serviced for other reasons, for damage to the seals which can result in loss or contamination of lubricant. Clean accumulated dirt and lubricant from outside surface of seals to permit thorough inspection. Replace damaged seals or joints immediately to prevent contamination of lubricant or damage to parts.
• Lubricate ball joints, if necessary. SOME MODELS ARE DESIGNED TO OPERATE WITH BALL JOINT FREE PLAY. REPLACEMENT SHOULD BE MADE ONLY WHEN FREE PLAY

Table Of Contents:

1967 Dodge Charger Cornet FSM Service Manual – PDF DOWNLOAD

ALTERNATOR ……………………. 10
BATTERY ……………………….. 10
BODY MAINTENANCE ……………… 25
BRAKES ………………………… 8
CARBURETOR AIR CLEANER ……….. 17
CARBURETOR CHOKE SHAFT ………. 18
CERTIFIED CAR CARE …………….. 1
CHASSIS LUBRICATION …………… 6
CLASSIFICATION OF LUBRICANTS …… 1
CLUTCH LINKAGE ………………… 9
COOLING SYSTEM ………………… 10
CRANKCASE VENTILATION SYSTEM …. 13
DISTRIBUTORS ………………….. 11
ENGINE OIL FILTERS ……………… 13
ENGINE PERFORMANCE EVALUATION . . 16
FREQUENCY OF OIL CHANGES ……… 12
FRONT WHEEL BEARINGS …………. 23
FUEL FILTERS …………………… 18
HEADLIGHTS ……………………. 11

Please Note:

• This is the SAME MANUAL used by the dealerships to diagnose your vehicle
• No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
• Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
• So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com

sk