CLAAS LEXION 560 / 550 MONTANA LEXION 530 / 520 MONTANA Operator’s Manual – PDF DOWNLOAD

Description

CLAAS LEXION 560 / 550 MONTANA LEXION 530 / 520 MONTANA Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

CLAAS LEXION 560 / 550 MONTANA LEXION 530 / 520 MONTANA Operator’s Manual – PDF DOWNLOAD

from serial no. 580 00029
from serial no. 582 00052

INTRODUCTION

• The present Operator’s Manual applies to the CLAAS LEXION 560 / 550 Montana combine-harvesters, type 580, from serial no. 580 00029 and LEXION 530 / 520 Montana, type 582, from serial no. 582 00052.
• It is primarily intended for the machine operator and contains information on using, setting and operating the machine. In general, texts and pictures apply to all machine models covered by this manual.
• The information given applies equally, except where reference is made to a particular model in captions to the pictures or in the main text.
• Operation and maintenance of important accessories is also covered by this manual. A separate Operator’s Manual is available for cutterbars.
• Please read the instructions which apply to the appropriate accessories on your machine. Provided all instructions regarding maintenance and care of your machine are followed, you can count on many years of reliable service.
• Please have your authorised CLAAS dealer carry out the recommended regular inspections. The neglecting of regular maintenance and proper machine operation lead to reduced performance and loss of time.
• If proper operation and careful maintenance is ensured, your combine harvester, which incorporates latest harvesting technology, will render you excellent service. This Operator’s Manual as well as the manuals listed below can be ordered from your CLAAS dealer:

TABLE OF CONTENTS:

CLAAS LEXION 560 / 550 MONTANA LEXION 530 / 520 MONTANA Operator’s Manual – PDF DOWNLOAD

1 Introduction
Introduction 111
2 Contents
Contents 211
3 General Information
Road traffic regulations 311
Important notice 321
Identification plate / Serial number 331
Identification plate 332
Machine serial number 332
Engine serial number
CATERPILLAR C-9 / C-10 332
Engine serial number
CATERPILLAR 3126 B 333
Straw chopper identification plate 333
Cab serial number 333
4 Safety Rules
Safety Rules 411
Cylinder safety lock 415
Fire extinguisher 415
Battery isolating switch 416
Wheel chocks 416
Positioning the wheel chocks 416
Hydraulic system 417
Danger of injury due to
escaping hydraulic liquid 417
Accumulators 418
Relieving the Auto-Contour accumulator 418
Relieving the Autopilot accumulator 418
Relieving the standard spreader accumulator 419
Safety decals with pictorials 421
5 Specifications
CLAAS LEXION 560 / 550 Montana 511
Front attachments – weights, dimensions 519
CLAAS LEXION 530 / 520 Montana 521
Front attachments – weights, dimensions 529
Safety features 531
6 Prior to operation
Carry out prior to initial operation 611
Cab 621
Cab with automatic climate control 621
Automatic climate control 622
Operating and display elements 622
Putting the automatic air
conditioner into operation 623
Setting the cab temperature 624
Manually setting the evaporator blower speed 624
Activating ECON operating mode 625
Deactivating ECON operating mode 625
REHEAT operation
(Dehumidify cab windows) 626
Displaying the outside temperature 627
Changing the temperature display
to °Fahrenheit 627
Floor heating 627
Display of malfunction: error in
thermometer F0 (cab, blue) 628
Display of malfunction: error in
thermometer F1 (exhaust, yellow) 628
Display of malfunction: error in
thermometer F2 (outside, red) 628
Cab with air conditioner
(Standard version) 629
Putting the air conditioning
system into operation 6210
Heater 6212
Floor heating 6212
Reheat system
(fogged windows) 6212
Malfunction, possible cause or remedy –
air conditioner system 6213
Cooling box 6215
Cooling unit
(option) 6215
Cooling bag
(option) 6215
Ice bucket
(option) 6215
Windscreen washer 6216
Crop inspection 6216
Opening and closing the cab roof 6216
Cab emergency exit 6217
Operator’s platform 631
Operator’s platform overview 631
Control console 633
Screen
(vehicle information display) 634
Screen
(harvest display) 635
C keys 636
Rotary switch D 636
Integrated Montana control unit 637
Integrated Montana control unit
in the switch console 638
Manual front attachment control system 639
Manual axle control system 639
Checking the Montana functions 6310
Checking the Montana functions manually 6310
Activating the integrated
Montana control unit 6311
Lowering the machine fully before
starting road travel 6312
Switching on/off of front attachment
automatic mode 6312
Manual axle control system 6313
Driving the machine in neutral position 6313
Manual front attachment control 6314
212 BA LEXION 560 – 520 Montana – 000 293 782 1
Contents
Correction / saving of front attachment cutting
angle and of front attachment cross levelling
(Montana) in automatic mode 6314
Steering column 6315
Ignition switch 6315
Multi-function switch 6316
Vehicle information unit 6317
Multi-function handle 6318
Steering column adjustment 6319
Adjusting the steering column top 6319
Steering wheel height adjustment 6320
Central terminal compartment 6320
Fuses 6322
Relays 6324
Operator’s seat 6326
Operator’s seat, mechanical 6326
Operator’s seat air suspension
(option) 6329
Lighting and socket outlets 641
Headlights, working lights, mirrors 641
Sidefinder
(option) 647
Pathfinder lighting 647
Side position lights in case of excess width 648
Socket outlets 6412
Access ladder 651
Access and ladder extension 651
Front ladder 653
Mounting the ladder 653
Folding the ladder steps 659
Swivelling the ladder 659
Rear ladder 6511
Other uses of the rear ladder 6512
Side panels 661
Opening and closing the side
panels and the tailgate 661
Opening the tailgate 662
Adjusting the gripping
height of the side panels 662
Adjusting the side panel lock 663
Tool cabinet 663
Toolbox 663
Folding down the tool cabinet 664
mud guards 671
Installing the mudguards 671
Rear axles 681
Adjustable rear drive axle
(260 m – 320 m) 682
Changing the adjustable rear drive
axle 260 m – 320 m from transport
to working position 682
Adjusting the track width 684
Rear axle
(271 m – 316 m) 688
Changing the 271 m – 316 m rear axle
from transport to working position 688
Adjusting the track width 689
Additional weights of rear axle 691
Rear axle additional weights
LEXION 560 / 550 Montana with
Standard cleaning system 691
Rear axle additional weights
LEXION 530 / 520 Montana with
Standard cleaning system 692
Liquid filling for rear axle tyres 693
Installing the additional weights 693
Cutterbar hydraulic cylinders 6101
Cutterbar hydraulic cylinders 6101
Number of cutterbar cylinders 6101
Grain tank 6111
Closing the grain tank drain holes 6111
Opening the grain tank cover completely by hand
(8100 / 7800 / 7300 litres grain tank) 6112
Driving the combine 6121
Checking the indicator lights 6121
Driving the combine 6121
Engine speed rotary switch 6121
Average engine idle speed 6122
Starting the engine 6122
Forward travel / reverse travel 6123
Stopping the engine 6123
Engaging/disengaging the
CLAAS 4-Trac system 6123
Gear selection 6124
Manoeuvring 6125
Hydrostatic ground drive 6126
Adjusting the stiffness of ground
speed control lever 6126
Stopping 6127
Driving behaviour 6127
Handling with cutterbar trailer 6127
Steering 6128
Brakes 6128
Foot brake 6128
Parking brake 6129
Releasing the parking brake mechanically 6129
Gear shifting – emergency operation 61210
Setting the gears to “0” (neutral position) 61210
Towing the machine 61210
Differential lock 61211
Engaging the differential lock 61211
Disengaging the differential lock 61211
CLAAS Autopilot
(Maize picker) 6131
Putting the CLAAS Autopilot into operation 6131
CLAAS Autopilot
(Grain cutterbar) 6133
Adjusting the directional stability of the
combine harvester 6133
Setting the laser sensor in the field 6135
Rough adjustment 6136
Fine adjustment 6137
Laser sensor (crop edge has moved
out of visible range) 6137
000 293 782 1 – BA LEXION 560 – 520 Montana 213
Contents
Adjusting the right laser sensor
(accessory) 6138
Putting the CLAAS Autopilot into operation 6139
Use in rape with left-hand side cutter 61310
Malfunction, possible cause or remedy –
Side hill compensation 6141
7 Installing and removing the cutterbar
Installing the cutterbar 711
Tilting the cutterbar from transport position 711
Adjusting the cutterbar cross levelling hydraulic cylinder
(up to serial no ) 712
Machines equipped with Auto Contour 712
Adjusting the cutterbar cross levelling hydraulic cylinder
(from serial no ) 713
Machines equipped with Auto Contour 713
Attaching the front attachment 713
Locking cutterbars and maize pickers
(Cutterbars without Auto Contour) 715
Connecting the universal drive shaft 715
Mounting the stands 716
Removing the cutterbar 721
Removing the universal coupling 721
Removing the universal drive shaft 721
Opening the cutterbar locking 722
Laying down the cutterbar on the ground 722
Placing the cutterbar on the cutterbar trailer 722
8 Operation CEBIS
Contents 811
CLAAS on-board information system (CEBIS) 821
CEBIS Monitor and rotary switch 823
C-keys 823
Rotary switch D 823
Multifunctional handle M 823
Window sections E
(Harvest display) 823
Flagging box 823
Rotary switch D 826
Prior-to-initial operation 827
Vehicle information display 828
Harvest display 828
Montana control 829
Axle control mode 829
Cutting angle control 829
Lateral levelling control 8210
Montana axle end stops 8210
Cutting angle limits 8210
Lateral levelling limits 8210
Display period 8211
Yield mapping 8212
Flagging 8213
GPS 8214
Mapping ON/OFF 8214
Mapping monitor 8214
Load GPS data 8214
Presettings reel 8215
Reel horizontal position 8215
Reel speed 8215
Reel height 8216
Presettings front attachment 8217
Clearance between snapping plates 8217
Cutterbar table length 8217
Cutting height settings (CAC) 8218
Cutting height settings for LEXION Montana 8219
Partial width selection 8220
Yield meter 8221
Componentes 8221
Basic setting and calibration 8221
Preparation for yield measurement 8222
Moisture measurement ON/OFF,
moisture correction, storage moisture 8222
Quick guide to accurate measuring data 8222
Yield measurement 8223
Calibration factor 8223
Set zero yield 8223
Test-weighing 8224
Weight measured 8224
Moisture correction 8224
Moisture mesaurement ON/OFF 8224
Set zero angle 8225
Storage moisture 8225
Display dry yield 8225
Setting combine to type of crop 8226
List of threshable crops 8226
Load CLAAS adjustments 8226
Load own adjustments 8227
Save own adjustments 8227
Print machine adjustments 8227
Display of CLAAS adjustments 8227
Display of own adjustments 8227
Cleaning by blowing 8228
Recording harvest work 8229
Planned work records 8229
Next planned work record 8229
Previous planned work record 8230
New planned work record 8230
Change a planned work record 8230
Start / Stop 8231
Completed work records 8232
Next or previous completed work record 8232
Restart a completed work record 8232
Printer 8232
Area correction 8232
Daily recorder 8233
Printing daily recordings 8233
Clear daily recordings 8233
Total recorder 8234
Printing recorder summaries 8234
Crop recorder 8234
Copy the chip card 8235
Adjustments 8236
Cutterbar 8236
Sensitivity CAC 8236
Cutterbar upper and lower limits 8237
Partial width proportions 8237
214 BA LEXION 560 – 520 Montana – 000 293 782 1
Contents
Working position 8237
Working width 8238
Auto reel height 8238
Reel end stops 8238
Cutterbar automatics 8238
Cutterbar table length stops 8239
Fore & aft reel adjustment stops 8239
Vario automatics ON/OFF 8239
Snapping plate end stops 8239
Speeds 8240
Learning speeds 8240
Learning max no-load speed 8240
Belt slip limit indicator 8241
Chaff spreader speed monitor 8241
Returns elevator speed monitor 8241
Tachometer 8242
Calibration run 8242
Impulses/100 8242
Sensitivity Autopilot 8243
Zero Autopilot front attachment 8243
Zero steering 8243
Autopilot signal 8244
Driving strategy 8244
Separation 8245
Sensor test 8245
Upper and lower sieve end stops 8245
Upper and lower sieve adjustment 8246
Returns limit 8246
Set zero returns 8246
CEBIS 8247
Language 8247
Date/Time 8248
Display positive/negative 8248
Measuring units 8249
Version 8249
Own display 8250
Telemetry
(additional equipment) 8251
Maintenance 8252
XXh OK 8252
XXh service list 8252
Operator’s manual 8253
Basic settings 8253
Guide to adjustments 8254
Problems/Remedies 8254
CEBIS 8255
Check list 8255
Safety rules 8255
Code protection 8256
Engine load 8257
Engine diagnosis 8257
Alarms 8258
Alerts 8258
Problems / remedies – yield meter 8259
Guide for impulses / 100 m 8260
9 Operation – Basic machine
Feeder housing 911
Feeder chains 911
Drum inspection cover 912
Front attachment reverser 913
Front attachment floatation springs 913
Checking the setting of the floatation springs 913
Cutting height indicator 915
Spring pressure indicator 915
Blocking the front attachment floatation springs
(Mechanical blocking) 916
Unlocking the front attachment floatation springs
(Mechanical blocking) 916
Adjusting the drop rate of the front attachment 916
Engaging the front attachment
(switch console, up to serial no ) 917
Engaging the front attachment
(switch console, from serial no ) 917
Disengaging the front attachment
(switch console) 918
Front attachment QUICK STOP
(switch console) 918
Disengaging the front attachment
(multi-function handle) 919
Front attachment QUICK STOP
(multi-function handle) 919
Threshing mechanism 921
Stone trap
(large stone trap) 921
Engaging the threshing mechanism 922
Disengage the threshing mechanism 922
Threshing drum 923
Cleaning the threshing mechanism 923
Concave setting 924
Basic concave setting 924
Designations and dimensions for grain
concave / maize concave
(large stone trap) 929
Designations and dimensions
on spike tooth concave
(large stone trap) 9210
Adjusting the concave position sensor 9211
Threshing drum speed 9212
Drum drives 9212
Two-step variable-speed drive 9212
Removing and installing the preconcave segments
(large stone trap) 9213
Concave segment 9214
Removing a concave segment
(large stone trap) 9214
Installing the concave segment
(large stone trap) 9215
Disawning 9216
Unslugging the threshing drum 9216
Deflector curtain 9217
Adjusting the deflector curtain 9218
Straw walker 931
Straw walker 931
Cleaning the straw walker 931
Warning signal 932
Multiple finger separation system 932
000 293 782 1 – BA LEXION 560 – 520 Montana 215
Contents
Straw walker performance monitor 933
Straw walker sensor 933
Straw walker risers 934
Rice risers 934
Centre riser 935
Side risers 936
Parallel risers 937
CCM risers 938
Cleaning
(Standard cleaning system) 941
Cleaning unit 941
Preparation floor 942
Frogmouth sieves 943
Electric sieve adjustment 943
Removing the sieves 944
Removing the upper sieves 944
Removing the lower sieves 946
Installing the sieves 947
Tightening torques of axial mountings
for the upper and lower sieves 947
Sieves – Basic setting 948
Harvesting without lower sieves 949
Covering the returns pan 949
Cleaning fan 9410
Fan speed adjustment 9410
Under-ventilated cleaning step 9410
Adjusting the pre-separation duct deflector 9410
Wind board 9411
Fan shutters for threshing grass seed and similar crops
(accessory) 9411
Dynamic slope compensation
(3-D cleaning system) 9412
Returns 9413
Inspecting the returns 9413
Upper sieve performance monitor 9414
Sieve pan sensor 9414
Grain delivery 951
Augers and auger troughs 951
Elevators 952
Grain tank 953
Safety decal (0516 2751) 953
Grain tank extension 954
Unloading the grain tank 955
Emergency unloading grain tank cover 956
Grain tank unloading aid
(accessory) 956
Grain tank unloading tube 957
Swinging the grain tank unloading
tube out and in 957
Grain tank unloading tube transport position 958
Cleaning covers on the
grain tank unloading tube 959
Shear bolt for grain tank unloading 959
Engaging and disengaging
grain tank unloading 9510
Grain tank access 9510
Automatic chain lubrication – grain tank unloading
(accessory) 9511
Grain tank fill indicator 9511
Straw chopper 961
Straw chopper 961
Before using the chopper
for the first time, check 961
Straw chopper with standard spreader 962
Putting the straw chopper into operation
(swinging the standard spreader
to chopping position) 962
Putting the straw chopper out of operation
(swinging the standard spreader
to swathing position) 963
Swinging the standard spreader to cutterbar
trailer transport position 964
Adjusting the cross blade 964
Adjusting the length of cut 965
Engaging the rasp bar
(accessory) 966
Adjusting the standard spreader spreading width
(up to serial no ) 966
Adjusting the standard spreader spreading width
(from serial no ) 967
Adjusting the height of standard spreader 968
Adjusting the spreading width centre
of standard spreader 969
Reducing the chopper speed 9610
Chaff spreader / Straw spreader 971
Chaff spreader 971
Adjusting the chaff spreader speed 971
Adjusting the spreading width 972
Folding the chaff spreader open 972
Folding the chaff spreader in 974
Chaff spreader feed pan 974
Removing the chaff spreader feed pan 974
Installing the chaff spreader feed pan 975
Straw spreader 976
Adjusting the spreading width 976
Fitting the spreader rotors 976
LEXION 560 / 520 Montana
sieve charts and suggested combine adjustments
(standard cleaning system) 981
LEXION 560 / 520 Montana sieve chart
(standard cleaning system) 981
LEXION 560 – 520 Montana
suggested combine adjustments
(standard cleaning system) 982
Disawning 991
Disawner plates 991
Concave segment 991
Malfunction, cause and / or remedy –
Basic machine 9101
10 Maintenance – Basic machine
Important maintenance instructions 1011
Important maintenance instructions
and safety rules 1011
Front attachment 1011
Correct tension of steel roller chains 1011
Belts 1012
216 BA LEXION 560 – 520 Montana – 000 293 782 1
Contents
Variable-speed drives 1012
Bolts 1012
Lubrication 1012
Brakes 1013
Wheels / tyres 1014
Hydraulic system 1015
Electrical system 1016
Air conditioner 1017
Safety guards / spare parts 1018
Unbalance 1018
Welding 1019
Maintenance schedules and lubricants charts 1021
Maintenance schedules 1021
Lubricants charts 1024
Hydraulic system 1031
Accumulators 1031
Checking the oil level 1031
Change hydraulic oil 1032
Changing the hydraulic oil filter 1033
Saturation of hydraulic oil filter
(from serial no ) 1033
Replacing the return filter
(up to serial no ) 1034
Replacing the return filter
(from serial no ) 1034
Filling instructions when replacing the hydraulic oil
(Sauer 90 R 130 / 90 M 100) 1035
Bleeding the cutterbar cross levelling hydraulic cylinder
(up to serial no ) 1035
Bleeding the cutterbar cross levelling hydraulic cylinder
(from serial no ) 1037
Gearboxes 1041
2-gear manual gearbox 1041
Checking the oil level 1041
Oil change 1041
Differential and axle carrier 1042
Checking the oil level 1042
Oil change 1042
Wheel rocker arms 1043
Checking the oil level 1043
Oil change 1043
Final drive gearbox
(planetary gear) 1043
Checking the oil level 1043
Oil change 1043
Threshing drum reduction gearbox 1044
Oil change 1044
Checking the oil level 1044
Transfer gearbox
(engine) 1045
Checking the oil level 1045
Oil change 1045
Grain tank unloading gearbox 1045
Checking the oil level 1045
Oil change 1045
Regrease ball-bearing slewing rings
of wheel rocker arms 1046
Lubricating instructions for
ball-bearing slewing rings 1047
Feeder housing 1051
Tension feeder chains 1051
Adjusting the front attachment
cutting angle linkage 1052
Adjusting the front attachment cross
levelling linkage (Montana)
(from serial no ) 1052
Cleaning the suction blower
(accessory) 1052
Drive axle 1061
Adjusting the wheel rocker arms linkage 1061
Elevator chains 1071
Tensioning the grain elevator chain
(machine without yield meter) 1071
Tensioning/relieving the tension
of the grain elevator chain
(machine with yield meter) 1072
Tensioning the returns elevator chain 1072
Drive belts / drive chains 1081
General Information 1081
Drive diagram, left side
(LEXION 560 / 550 / 530 / 520 Montana with
standard cleaning system) 1082
Drive belts, drive chains 1082
Drive diagram, right side
(LEXION 560 / 550 / 530 / 520 Montana
with standard cleaning system) 1083
Drive belts, drive chains 1083
Removing the belt (1) 1084
Installing the belt (1) 1085
Removing the belt (2) 1086
Installing the belt (2) 1088
Removing the belt (3) 1089
Installing the belt (3) 10810
Removing the belt (4) 10812
Installing the belt (4) 10814
Removing the belt (5) 10816
Installing the belt (5) 10817
Removing the belt (6) 10819
Installing the belt (6) 10820
Removing the belt (7) 10821
Installing the belt (7) 10823
Removing the belt (8) 10826
Installing the belt (8) 10827
Removing the belt (9) 10829
Installing the belt (9) 10832
Removing the belt (10) 10834
Installing the belt (10) 10836
Removing the chain (11) 10838
Installing the chain (11) 10839
Removing the belt (12) 10841
Installing the belt (12) 10842
Removing the belt (13) 10844
Installing the belt (13) 10845
Removing the belt (14) 10847
Installing the belt (14) 10848
000 293 782 1 – BA LEXION 560 – 520 Montana 217
Contents
Removing the belt (17) 10849
Installing the belt (17) 10851
Removing the belt (18) 10853
Installing the belt (18) 10855
Removing the belt (19) 10856
Installing the belt (19) 10857
Removing the belt (20) 10859
Installing the belt (20) 10861
Removing the belt (22) 10864
Installing the belt (22) 10865
Removing the belt (45) 10867
Installing the belt (45) 10868
Removing the belt (46) 10870
Installing the belt (46) 10871
Removing the belt (48) 10873
Installing the belt (48) 10875
Removing the belt (51) 10876
Installing the belt (51) 10877
Removing the belt (52) 10878
Installing the belt (52) 10879
Removing the belt (53) 10881
Installing the belt (53) 10882
Removing the belt (54) 10884
Installing the belt (54) 10885
Removing the chain (55) 10886
Installing the chain (55) 10886
Installing the chain (56) 10888
Removing the belt (57) 10889
Installing the belt (57) 10890
Remove belt (58)
(CATERPILLAR C9 / 3126 B) 10892
Installing belt (58)
(CATERPILLAR C9 / 3126 B) 10893
Removing belt (58)
(CATERPILLAR C10) 10894
Installing the belt (58)
(CATERPILLAR C10) 10895
Removing the belt (59) 10896
Installing the belt (59) 10897
Cab / air conditioner 1091
Cab 1091
Cleaning the filters 1091
Cleaning the units located in the cab roof 1091
Cleaning the cab screens 1092
Air conditioner 1093
Cleaning the condenser 1093
Checking refrigerant level 1093
Replacing the filter receiver drier 1094
Required refrigerant quantity –
refrigerant R 134 a 1094
Oil for the compressor 1095
Maintenance work before the harvest 1095
Fire extinguisher 10101
Compressed-air system
(accessory) 10111
Compressed air connections 10112
Compressed-air gun and woven hose 10112
Draining the accumulator 10113
Pressure controller 10113
Checking the safety valve 10114
Straw chopper 10121
Replacing the free-swinging
knives for grain 10121
Removing the straw guide plate 10121
Installing the straw guide plate 10123
Removing the free-swinging
knives for grain 10125
Bolting down the free-swinging
knives for grain 10125
Replacing the stationary knives 10127
Winter storage instructions for combines 10131
11 Maintenance – Engine
Important maintenance instructions 1111
Important maintenance instructions
and safety rules 1111
Maintenance schedules and lubricants charts 1121
Maintenance schedule 1121
Maintenance schedule 1122
Lubricants chart 1123
Engine maintenance 1131
Engine overview 1131
Fuel system / engine oil 1141
Fuel system 1141
Fuel tank 1141
Fuel tank breather
(from serial no ) 1141
Fuel shut-off tap 1142
Water separator / fuel prefilter
(standard equipment – small version) 1142
Water separator / fuel pre-filter
(accessory, replaces fuel pre-filter Fig 5) 1143
Replacing the fuel filter cartridge 1144
Bleed fuel system 1145
Engine oil level check 1145
Engine oil change 1145
Draining used oil 1146
Oil filter 1147
Topping up engine oil 1148
Cooling system 1151
Coolant 1151
Water drain plugs on the engine block 1151
Radiator 1152
Filling the cooling system with coolant 1153
Overpressure 1153
Frost protection / corrosion protection 1153
Warning sign 1153
Coolant temperature 1154
Shut down the overheated engine 1154
Rotary chaff screen 1155
Cleaning the radiator 1157
Dry-type air filter 1161
Warning device 1162
Cleaning the air filter intake screen 1162
Cleaning the air filter with plastic housing 1163
Removing the air filter main cartridge 1163
Cleaning the air filter main cartridge 1164
218 BA LEXION 560 – 520 Montana – 000 293 782 1
Contents
Installing the air filter main cartridge 1164
Cleaning the air filter with metal housing 1165
Removing the air filter main cartridge 1165
Cleaning the air filter main cartridge 1166
Installing the air filter main cartridge 1167
Safety filter cartridge 1167
Removing and installing safety cartridge
(plastic housing) 1168
Removing and installing safety cartridge
(metal housing) 1169
Alternator 1171
Cleaning the alternator 1171
Electrical system 1181
Battery 1181
Alternator 1182
Engine problems, cause and / or remedy 1191
Engine winter storage 11101
Engine preservation 11101
12 Lubrication chart
Lubricants and lubrication instructions 1211
13 Index
Index 1311

IMAGES PREVIEW OF THE MANUAL:

CLAAS LEXION 560 / 550 MONTANA LEXION 530 / 520 MONTANA OPERATOR’S MANUAL – PDF DOWNLOAD:

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted

S.M