Bobcat 625S BACKHOE Operation & Maintenance Manual SN A6TW02000 & above – PDF DOWNLOAD

Description

Bobcat 625S BACKHOE Operation & Maintenance Manual SN A6TW02000 & above – PDF DOWNLOAD

FILE DETAILS:

Bobcat 625S BACKHOE Operation & Maintenance Manual SN A6TW02000 & above – PDF DOWNLOAD

Language : English
Pages :72
Downloadable : Yes
File Type : PDF

TABLE OF CONTENTS:

Bobcat 625S BACKHOE Operation & Maintenance Manual SN A6TW02000 & above – PDF DOWNLOAD

CONTENTS 3
REFERENCE INFORMATION 3
FOREWORD 5
SAFETY 13
Safety is the operator’s responsibility 15
Safe operation needs a qualified operator 15
Use safety rules 16
Fire prevention 16
General hazard warning 19
Crushing hazard 19
Attaching the backhoe 20
Removing the backhoe 21
Backhoe hydraulic control functions 21
Using the KLAC system 22
Attachment removal 22
Attachment installation 22
OPERATING INSTRUCTIONS 23
READ ALL MACHINE SIGNS (DECALS) AND INSTRUCTIONS CAREFULLY 26
IMPORTANT REMARKS 26
Warranty 26
Torques 26
Front auxiliary hydraulics 26
FIRST TIME INSTALLATION 27
Preparing the loader 27
Preparing the Bob-Tach 28
Preparing the Backhoe 29
ATTACHING THE BACKHOE 30
Inspecting the Bob-Tach and Backhoe 30
Set Bob-Tach levers 30
Attaching the Backhoe to the Loader 30
Connecting auxiliary hydraulic couplers to the Backhoe 32
Making the electrical connection to the Backhoe 32
Securing the Backhoe to the Loader with the arm plates 33
HYDRAULIC CONTROLS 34
Putting the Control Panel into operational position 34
Engaging hydraulic pressure 35
Relieve Pressure At Couplers 35
REMOVING THE BACKHOE 36
Positioning the bucket and securing the boom of the Backhoe 36
Remove arm plates from the loader 36
Disengaging the auxiliary hydraulics 36
Release the Bob-Tach levers 37
Disconnecting the auxiliary hydraulic hoses 37
Disconnecting the electrical connector 37
Detaching the Loader from the Backhoe 37
OPERATING INSTRUCTIONS 39
GETTING ON AND OFF THE LOADER / BACKHOE 40
BOOM TRANSPORT LOCKING PIN 41
BACKHOE CONTROLS 42
Operating Control Levers 42
Operating Control Levers (cont’d) 43
Operating The Stabilizers 44
Auxiliary Hydraulic Controls 44
OPERATING THE LOADER / BACKHOE 45
Moving The Swing / Side Shift Frame 45
Moving The Loader / Backhoe 47
Moving The Loader / Backhoe While Digging 48
GETTING READY FOR BACKHOE OPERATION 49
OPERATING THE BACKHOE 50
Safety instructions 50
Digging With The Arm 51
Digging With The Bucket 52
TRANSPORTING THE LOADER / BACKHOE 53
Lifting The Backhoe 53
Fastening The Backhoe To The Transport Vehicle 53
Loading The Backhoe Onto The Transport Vehicle 54
ATTACHMENTS 56
Installing The Bobcat Quick Coupler (BQC) Type K Buckets 56
PREVENTIVE MAINTENANCE 58
TROUBLESHOOTING THE BACKHOE 60
LUBRICATION OF THE BACKHOE 61
INSPECTING THE BACKHOE 62
INSPECTION AND MAINTENANCE OF BOB-TACH 63
SPECIFICATIONS 64
625S BACKHOE SPECIFICATIONS 66
BUCKET SPECIFICATIONS 69
HYDRAULIC SCHEMATIC 625S BACKHOE 70

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Bobcat 625S BACKHOE Operation & Maintenance Manual SN A6TW02000 & above – PDF DOWNLOAD

FOREWORD

This Operation & Maintenance Manual was written to give the owner / operator instructions on the safe operation and maintenance of the Bobcat Backhoe. READ AND UNDERSTAND THIS OPERATION & MAINTENANCE MANUAL BEFORE OPERATING YOUR BACKHOE. If you have any questions, see your dealer.

SAFETY INSTRUCTIONS

Operator must have instructions before operating the machine. Untrained operators can cause injury or death.

Safe Operation Needs A Qualified Operator

For an operator to be qualified, he or she must not use drugs or alcoholic drinks which impair alertness or coordination while working. An operator who is taking prescription drugs must get medical advice to determine if he or she can safely operate a machine and the attachment.

A Qualified Operator Must Do The Following:

Understand the Written Instructions, Rules and Regulations

• The written instructions from Bobcat Company include the Delivery Report, Operation & Maintenance Manual, Operator’s Handbook, Safety Manual and machine signs (decals).
• Check the rules and regulations at your location. The rules may include an employer’s work safety requirements. Regulations may apply to local driving requirements or use of a Slow Moving Vehicle (SMV) emblem. Regulations may identify a hazard such as a utility line.

Have Training with Actual Operation

•  Operator training must consist of a demonstration and verbal instruction. This training is given by your Bobcat dealer before the product is delivered.
• The new operator must start in an area without bystanders and use all the controls until he or she can operate the machine and attachment safely under all conditions of the work area. Always fasten seat belt before operating.

Know the Work Conditions

• Know the weight of the materials being handled. Avoid exceeding the machine load capacities. Material which is very dense will be heavier than the same volume of less dense material. Reduce the size of load if handling dense material.
• The operator must know any prohibited uses or work areas, for example, he or she needs to know about excessive slopes.
• Know the location of any underground lines. Call local utilities or the TOLL FREE phone number found in the Call Before You Dig section of this manual.
• Wear tight fitting clothing. Always wear safety glasses when doing maintenance or service. Safety glasses, respiratory equipment, and hearing protection are required for some work. See your Bobcat dealer about Bobcat safety equipment for your machine.

SAFETY INSTRUCTIONS (CONT’D)
Use Safety Rules

• Read and follow instructions in the machine and the attachment’s / implement’s Operation & Maintenance Manual before operating.
• Check for underground lines before operating attachment / implement (if applicable).
• In addition to the design and configuration of equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training of personnel involved in the operation, transport, maintenance and storage of equipment.
• Check that the attachment mounting pins and hardware are installed correctly and securely fastened (if equipped).
• Check that the loader is securely installed to the compact tractor using the correct pins and hardware.
• Check that the Bob-Tach® levers are in the locked position and the wedges are fully engaged into the mounting holes of the attachment (if applicable).
• Check that the implement is securely fastened to the machine.
• Depress brake pedals (or make sure parking brake is engaged) and make sure all the machine controls are in the NEUTRAL position before starting the machine. • Always start the machine from the operator’s seat.
• Operate the attachment / implement according to the Operation & Maintenance Manual.
• When learning to operate the attachment / implement, do it at a slow rate in an area clear of bystanders.
• DO NOT permit personnel to be in the work area when operating the machine and attachment / implement.
• The attachment / implement must be used ONLY on approved machines. See your Bobcat dealer for updated list of approved attachments / implements for each machine model.
• DO NOT modify equipment or add attachments / implements that exceed manufacturer’s specifications.
• DO NOT make any adjustments or repairs on the machine or attachment / implement while the engine is running.
• Keep shields and guards in place. Replace if damaged.

Contact us: [email protected]

https://vimeo.com/843422566?share=copy

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.M