Bobcat Hydra-Tilt™ Operation & Maintenance Manual SN 857800101 & Above – PDF DOWNLOAD

Description

Bobcat Hydra-Tilt™ Operation & Maintenance Manual SN 857800101 & Above – PDF DOWNLOAD

FILE DETAILS:

Bobcat Hydra-Tilt™ Operation & Maintenance Manual SN 857800101 & Above – PDF DOWNLOAD

Language : English
Pages : 94
Downloadable : Yes
File Type : PDF

DESCRIPTION:

Bobcat Hydra-Tilt™ Operation & Maintenance Manual SN 857800101 & Above – PDF DOWNLOAD

FOREWORD
This Operation & Maintenance Manual was written to give the owner / operator instructions on the safe operation
and maintenance of the Bobcat attachment. READ AND UNDERSTAND THIS OPERATION & MAINTENANCE
MANUAL BEFORE OPERATING YOUR BOBCAT ATTACHMENT. If you have any questions, see your Bobcat
dealer.

SAFETY INSTRUCTIONS
Safe Operation Is The Operator’s Responsibility

Operator must have instructions before operating the machine. Untrained operators can cause injury or death

IMPORTANT

This notice identifies procedures which must be followed to avoid damage to the machine.

The Bobcat machine and attachment must be in good operating condition before use.
Check all of the items on the Bobcat Service Schedule Decal under the 8-10 hour column or as shown in the Operation & Maintenance Manual.

Safe Operation Needs A Qualified Operator

For an operator to be qualified, he or she must not use drugs or alcoholic drinks which impair alertness or co- ordination while working. An operator who is taking prescription drugs must get medical advice to determine if he or she can safely operate a machine and the attachment.

A Qualified Operator Must Do The Following:

Understand the Written Instructions, Rules and
Regulations

• • The written instructions from Bobcat Company include the Delivery Report, Operation & Maintenance Manual, Operator’s Handbook, Safety Manual and machine signs (decals).
• Check the rules and regulations at your location. The rules may include an employer’s work safety requirements. For driving on public roads, the machine must be equipped as stipulated by the local regulations authorising operation on public roads in your specific country. Regulations may identify a hazard such as a utility line.

Have Training with Actual Operation

• Operator training must consist of a demonstration and verbal instruction. This training is given by your Bobcat dealer before the product is delivered.
• The new operator must start in an area without bystanders and use all the controls until he or she can operate the machine and attachment safely under all conditions of the work area. Always fasten seat belt before operating.
  Know the Work Conditions 

• Know the weight of the materials being handled. Avoid exceeding the machine load capacities. Material which is very dense will be heavier than the same volume of less dense material. Reduce the size of load if handling dense material.
• The operator must know any prohibited uses or work areas, for example, he or she needs to know about excessive slopes.
• Know the location of any underground lines.
• Wear tight fitting clothing. Always wear safety glasses when doing maintenance or service. Safety glasses, respiratory equipment, hearing protection, Special Applications Kits or a Front Window Guard are required for some work. See your Bobcat dealer about Bobcat Safety equipment for your machine.

SAFETY INSTRUCTIONS (CONT’D)
Use Safety Rules

• • Read and follow instructions in the machine and the attachment’s Operation & Maintenance Manual before operating.
• Check for underground lines before operating attachment (if applicable).
• In addition to the design and configuration of equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training of personnel involved in the operation, transport, maintenance and storage of equipment.
• Check that the Bob-Tach™ levers are in the locked position and the wedges are fully engaged into the holes of the attachment (if applicable).
• Check that the attachment is securely fastened to the machine.
• Make sure all the machine controls are in the NEUTRAL position before starting the machine.
• Operate the attachment only from the operator’s position.
• Operate the attachment according to the Operation & Maintenance Manual.
• When learning to operate the attachment, do it at a slow rate in an area clear of bystanders.
• DO NOT permit personnel to be in the work area when operating the machine and attachment.
• The attachment must be used ONLY on approved machines. See your Bobcat dealer for updated list of approved attachments for each machine model.
• DO NOT modify equipment or add attachments that are not approved by the manufacturer.
• DO NOT make any adjustments or repairs on the machine or attachment while the engine is running.
• Keep shields and guards in place. Replace if damaged.

IMAGES PREVIEW OF THE MANUAL:

TABLE OF CONTENTS:

Bobcat Hydra-Tilt™ Operation & Maintenance Manual SN 857800101 & Above – PDF DOWNLOAD

CONTENTS 3
FOREWORD 5
BOBCAT COMPANY IS IS0 9001 CERTIFIED 7
SERIAL NUMBER LOCATION 9
Attachment Serial Number 9
DELIVERY REPORT 9
ATTACHMENT IDENTIFICATION 10
FEATURES AND ACCESSORIES 11
Falling Object Guard Structure (FOGS) For Excavators 11
Special Applications Kit For Excavators 11
SAFETY AND TRAINING RESOURCES 13
SAFETY INSTRUCTIONS 15
Safe Operation Is The Operator’s Responsibility 15
Safe Operation Needs A Qualified Operator 15
Use Safety Rules 16
Avoid Silica Dust 16
FIRE PREVENTION 17
Maintenance 17
Operation 17
Electrical 17
Hydraulic System 17
Fueling 17
Starting 17
Spark Arrester Exhaust System 17
Welding And Grinding 18
Fire Extinguishers 18
PUBLICATIONS AND TRAINING RESOURCES 19
ATTACHMENT SIGNS (DECALS) 20
OPERATING INSTRUCTIONS 21
DAILY INSPECTION 23
Attachment Mounting Frame 23
Pin-On X-Change 23
Bolt-On X-Change 24
X-Change 24
OPERATING PROCEDURE WITH EXCAVATORS 25
Approved Excavator Models And Requirements 25
Entering And Exiting The Excavator 26
Installation 29
Hydraulic Quick Couplers 41
Installing Bucket Onto The Hydra-Tilt 42
Control Functions 43
Operation With The Excavator 46
Removal 48
LIFTING THE ATTACHMENT 56
Procedure 56
TRANSPORTING THE ATTACHMENT ON A TRAILER 56
Fastening 56
TRANSPORTING THE ATTACHMENT AND MACHINE ON A TRAILER 57
Loading And Fastening 57
PREVENTIVE MAINTENANCE 59
TROUBLESHOOTING 63
Chart 63
LUBRICATING THE ATTACHMENT 64
Lubrication Locations 64
REMOVAL AND INSTALLATION OF CYLINDER 65
Procedure(s) 65
Cylinder Parts Identification 67
Cylinder Disassembly 68
Cylinder Assembly 71
ATTACHMENT STORAGE AND RETURN TO SERVICE 76
Storage 76
Return To Service 76
SPECIFICATIONS 77
SCHEMATIC(S) 79
Hydraulic Schematic 79
(HYDRA-TILT) SPECIFICATIONS 80
Dimensions 80
TORQUE SPECIFICATIONS FOR BOLTS 81
Torque For General SAE Bolts 81
Torque For General Metric Bolts 82
HYDRAULIC CONNECTION SPECIFICATIONS 83
O-ring Face Seal Connection 83
Straight Thread O-ring Fitting 83
Tubelines And Hoses 83
Flare Fitting 84
Port Seal Fitting 84
WARRANTY 87
WARRANTY 89
ALPHABETICAL INDEX 91

Need help? Contact: [email protected]

https://vimeo.com/844531691?share=copy

PLEASE NOTE:

• This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
• The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
• Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer

S.M