Bobcat S185 Turbo S185 Turbo High Flow Loader Operation & Maintenance Manual 6901831 – PDF DOWNLOAD

Description

Bobcat S185 Turbo S185 Turbo High Flow Loader Operation & Maintenance Manual 6901831 – PDF DOWNLOAD

FILE DETAILS:

Bobcat S185 Turbo S185 Turbo High Flow Loader Operation & Maintenance Manual 6901831 – PDF DOWNLOAD

Language : English
Pages : 124
Downloadable : Yes
File Type : PDF

DESCRIPTION:

Bobcat S185 Turbo S185 Turbo High Flow Loader Operation & Maintenance Manual 6901831 – PDF DOWNLOAD

S/N 519028001 & Above
S/N 519215001 & Above

FOREWORD:

This Operation & Maintenance Manual was written to give the owner/operator instructions on the safe operation and maintenance of the Bobcat loader. READ AND UNDERSTAND THIS OPERATION & MAINTENANCE MANUAL BEFORE OPERATING YOUR LOADER. If you have any questions, see your Bobcat loader dealer. This manual may illustrate loaders with additional options and accessories not installed on your loader.

SAFETY INSTRUCTIONS FOR BOBCAT SKID–STEER LOADERS AND ATTACHMENTS:
SAFE OPERATION IS THE OPERATOR’S RESPONSIBILITY:

• Carefully follow the operating and maintenance instructions in this manual.
• The Bobcat skid–steer loader is highly maneuverable and compact. It is rugged and useful under a wide variety of conditions. This presents an operator with hazards associated with off highway, rough terrain applications, common with Bobcat loader usage.
• The Bobcat loader has an internal combustion engine with resultant heat and exhaust. All exhaust gases can kill or cause illness so use the loader with adequate ventilation. The loader has a spark arrestor exhaust system or muffler which is required for operation in certain areas.
• The dealer explains the capabilities and restrictions of the Bobcat loader and attachments for each application. The dealer demonstrates the safe operation according to Bobcat instructional materials, which are also available to operators. The dealer can also identify unsafe modifications or use of unapproved attachments. The attachments and buckets are designed for a Rated Operating Capacity (some have restricted lift heights) and secure fastening to the Bobcat loader. The user must check with the dealer, or Bobcat literature, to determine safe loads of materials of specified densities for the loader–attachment combination.

The following publications and training materials provide information on the safe use and maintenance of the Bobcat loader and attachments:
• The Delivery Report is used to assure that complete instructions have been given to the new owner and that the Bobcat
loader and attachment is in safe operating condition.
• The Operation & Maintenance Manual delivered with the Bobcat loader or attachment gives operating information as well
as routine maintenance and service procedures. It is a part of the machine and can be stored in a container provided
inside the cab of the loader. Replacement Operation & Maintenance Manuals can be ordered from your Bobcat dealer.
• Machine signs (decals) instruct on the safe operation and care of your Bobcat loader or attachment. The signs and their
locations are shown in the Operation & Maintenance Manual. Replacement signs are available from your Bobcat dealer.
• An Operator’s Handbook is fastened to the operator cab of the loader. Its brief instructions are convenient to the operator.
The Handbook is available from your dealer in an English edition or one of many other languages. See your Bobcat dealer
for more information on translated versions.
• The Safety Manual delivered with the Bobcat loader gives general safety information.
• Operator Training Courses are available from your local Bobcat dealer. They provide information for safe and efficient
operation of the Bobcat loader and some attachments. The courses are available in English and Spanish versions.
• Service Safety Training Courses are available from your Bobcat dealer. They provide information for safe and correct
service procedures.

IMAGES PREVIEW OF THE MANUAL:

TABLE OF CONTENTS:

Bobcat S185 Turbo S185 Turbo High Flow Loader Operation & Maintenance Manual 6901831 – PDF DOWNLOAD

OPERATOR SAFETY WARNINGS 3
CONTENTS 5
FOREWORD 7
SERIAL NUMBER LOCATIONS 9
LOADER SERIAL NUMBER 9
ENGINE SERIAL NUMBER 9
DELIVERY REPORT 9
BOBCAT LOADER IDENTIFICATION 10
FEATURES AND ACCESSORIES 11
SAFETY 13
SAFETY INSTRUCTIONS FOR BOBCAT SKID–STEER LOADERS AND ATTACHMENTS 15
FIRE PREVENTION 17
MACHINE SIGNS (DECALS) 18
OPERATING INSTRUCTIONS 21
INSTRUMENT PANEL IDENTIFICATION 23
Left Panel – Standard and Deluxe Instrument Panels 23
Right Panel – Standard Instrument Panel (With Key Switch) 24
Right Panel – Deluxe Instrument Panel (With Keyless Start) 25
Option and Field Accessory Panels (If Equipped) 26
Cab Light 27
LIFT ARM BY–PASS CONTROL 27
TRACTION LOCK OVERRIDE 27
ENGINE SPEED CONTROL 28
PARKING BRAKE 28
STEERING LEVERS 29
STOPPING THE BOBCAT LOADER 29
SEAT BAR RESTRAINT SYSTEM 30
HYDRAULIC CONTROLS 31
Foot Pedals 31
Hand Controls (If Equipped) 31
Quick Couplers 32
Releasing Hydraulic Pressure 32
Attachment Auxiliary Hydraulic Controls 33
Auxiliary Hydraulics Button 33
FRONT Auxiliary Hydraulics Operation 33
REAR Auxiliary Hydraulics Operation (If Equipped) 33
High–Flow Hydraulics Operation (If Equipped) 34
Secondary Front Auxiliary Hydraulics (If Equipped) 34
Attachment Control Device (ACD) (If Equipped) 35
Bucket Position Valve Operation (If Equipped) 35
DAILY INSPECTION 36
Daily Inspection and Maintenance 36
PRE–STARTING PROCEDURE 37
STARTING THE ENGINE 39
Standard Instrument Panel (With Key Switch) 39
Deluxe Instrument Panel (With Keyless Start) 40
Cold Temperature Starting 41
Warming the Hydraulic/Hydrostatic System 41
STOPPING THE ENGINE 41
MONITORING THE DISPLAY PANEL 42
ATTACHMENTS AND BUCKETS 43
Hand Lever Bob–Tach 44
Installing The Bucket Or Attachment 44
Removing The Bucket Or Attachment 45
Power Bob–Tach 46
Installing The Bucket Or Attachment 46
Removing The Bucket Or Attachment 47
OPERATING PROCEDURE 48
Filling the Bucket (Foot Pedals) 49
Filling the Bucket (Hand Controls) 49
Emptying the Bucket (Foot Pedals) 50
Emptying the Bucket (Hand Controls) 50
Leveling the Ground (Using Lift Arms in Float Position)(Foot Pedals) 50
Leveling the Ground (Using Lift Arms in Float Position)(Hand Controls) 50
Digging Into the Ground (Foot Pedals) 51
Digging Into the Ground (Hand Controls) 51
Backfilling (Foot Pedals) 51
Backfilling (Hand Controls) 51
PARKING THE BOBCAT LOADER 52
TRANSPORTING THE BOBCAT LOADER 53
TOWING THE LOADER 53
LIFTING THE LOADER 54
Single Point Lift 54
Four Point Lift 54
PREVENTIVE MAINTENANCE 55
MAINTENANCE SAFETY 57
SERVICE SCHEDULE 59
LIFT ARM SUPPORT DEVICE 60
Installing Lift Arm Support Device 60
Removing Lift Arm Support Device 60
HEATER AND AIR CONDITIONING 61
Cleaning and Maintenance 61
OPERATOR CAB 62
Raising The Operator Cab 62
Cab Door Sensor (If Equipped) 62
Lowering The Operator Cab 63
Emergency Exit 64
SEAT BAR RESTRAINT SYSTEM (FOOT PEDALS) 65
Inspecting the Seat Bar 65
Maintaining the Seat Bar 65
SEAT BAR RESTRAINT SYSTEM ADVANCED CONTROL SYSTEM (ACS) and ADVANCED HAND CONTROLS (AHC) 66
Inspecting the Seat Bar 66
Maintaining the Seat Bar 66
BOBCAT INTERLOCK CONTROL SYSTEM (BICS™) 67
Inspecting The BICS™ Controller (Engine STOPPED – Key ON) 67
Inspecting Deactivation Of The Auxiliary Hydraulics System (Engine STOPPED – Key ON) 67
Inspecting The Seat Bar Sensor (Engine RUNNING) 67
Inspecting The Traction Lock (Engine RUNNING) 67
Inspecting The Lift Arm By–Pass Control 67
Inspecting Deactivation Of Lift And Tilt Functions (AHC & ACS) 67
REAR DOOR 68
Opening And Closing The Rear Door 68
Adjusting The Rear Door 68
REAR GRILL 69
AIR CLEANER SERVICE 70
Replacing Filter Element 70
FUEL SYSTEM 72
Fuel Specifications 72
Filling the Fuel Tank 72
Fuel Filter 72
Removing Air From The Fuel System 73
ENGINE LUBRICATION SYSTEM 74
Checking Engine Oil 74
Oil Chart 74
Replacing Oil And Filter 74
ENGINE COOLING SYSTEM 76
Cleaning The Cooling System 76
Checking The Coolant Level 76
Replacing the Coolant 77
ALTERNATOR BELT 77
Adjusting The Alternator Belt 77
ELECTRICAL SYSTEM 78
Description 78
Cleaning Battery Terminals 78
Fuse Location 78
Using A Booster Battery (Jump Starting) 79
Removing And Installing The Battery 80
HYDRAULIC/HYDROSTATIC SYSTEM 81
Checking And Adding Fluid 81
Replacing Hydraulic/Hydrostatic Filter 81
Replacing Hydraulic Fluid And Case Drain Filters 82
Breather Cap 83
SPARK ARRESTOR MUFFLER 84
TIRE MAINTENANCE 85
Wheel Nuts 85
Rotating 85
Mounting 85
FINAL DRIVE TRANSMISSION (CHAINCASE) 86
Checking And Adding Oil 86
Removing Oil From The Chaincase 86
FAN GEARBOX 86
Checking And Maintaining 86
DRIVE BELT 87
Adjusting The Drive Belt 87
Replacing The Drive Belt 87
LUBRICATION OF THE BOBCAT LOADER 88
PIVOT PINS 90
BOB–TACH (Hand Lever) 91
Inspection And Maintenance 91
BOB–TACH (Power – Option) 92
Inspection And Maintenance 92
SYSTEM SETUP & ANALYSIS 93
BOBCAT INTERLOCK CONTROL SYSTEM (BICS™) 95
Troubleshooting Chart 95
DELUXE INSTRUMENTATION SERVICE CODES 96
Number Codes List 96
DELUXE INSTRUMENTATION PANEL SETUP 100
Deluxe Panel Upgrade 100
Icon Identification 100
Deluxe Panel Setup 100
Passwords 101
Changing the Password 101
MACHINE SIGN TRANSLATIONS 103
SPECIFICATIONS 113
SKID STEER LOADER SPECIFICATIONS 115
Loader Dimensions 115
Performance 116
Engine / Electrical 116
Hydraulic System 116
Drive System 117
Capacities 117
Controls 117
BOBCAT APPROVED ATTACHMENTS & ACCESSORIES 118
ADDITIONAL PUBLICATIONS and TRAINING MATERIALS 121
WARRANTY 123

Questions? Email us: [email protected]

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.V