Case 1021F Tier 4 1121F Tier 4 Wheel Loader Operator’s Manual 47552848 – PDF DOWNLOAD

Description

Case 1021F Tier 4 1121F Tier 4 Wheel Loader Operator’s Manual 47552848 – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Case 1021F Tier 4 1121F Tier 4 Wheel Loader Operator’s Manual 47552848 – PDF DOWNLOAD

GENERAL INFORMATION :
Note to the Owner [52439709] :

• Read this manual before you start the engine or operate the machine. If you need more information, see your CASE
  CONSTRUCTION dealer.
• This manual contains important information about the safe operation, adjustment, and maintenance of your machine.
  Refer to the index at the back of this manual for locating specific items about your machine.
• Read this manual carefully, paying particular attention to the instructions concerning safety, operation and maintenance
  so as to avoid the risk of injury while operating or servicing the machine. The machine has been designed and
  manufactured according to the strictest quality standards and complies with the standard 2006/42/EC. However, the
  risk of accidents can never be completely excluded. That is why it is essential to observe elementary safety rules and
  precautions.
• Consult an authorized dealer or CNH Italia S.p.A. on changes, additions, or modifications that can be required for this
  machine to comply with various country regulations and safety requirements. Unauthorized modifications will cause
  serious injury or death. Anyone making such unauthorized modifications is responsible for the consequences.
• The information in this manual is provided on the basis of information that was available at the time the manual was
  written. Settings, procedures, part numbers, software and other items can change. These changes can affect the
  maintenance performed on the machine. Ensure that you have complete and current information from your dealer
  before you start any machine operation.
• All data in this manual is subject to production variations. Dimensions and weights are provided with approximate
  values and the machine fitting shown in the illustrations may not correspond with standards models. For precise
  information on specific machine models and versions, please contact your CASE CONSTRUCTION dealer.

TABLE OF CONTENTS:

Case 1021F Tier 4 1121F Tier 4 Wheel Loader Operator’s Manual 47552848 – PDF DOWNLOAD

1 GENERAL INFORMATION
Note to the Owner 1-1
Declaration of conformity 1-5
Noise level 1-8
Vehicle vibration levels 1-9
Operator’s manual and Quick Reference Guide storage 1-10
Right, left, front and rear of the machine 1-12
Machine components 1-13
Note to the owner 1-15
Identification numbers 1-16
Electro-Magnetic Compatibility (EMC) 1-19
2 SAFETY INFORMATION
Safety rules and signal word definitions 2-1
Personal safety 2-2
Safety rules – Utility safety 2-3
Safety rules 2-4
Safety rules – Getting on and off the machine 2-5
Safety rules 2-6
Operating precautions 2-7
Maintenance precautions 2-9
Safety rules – Fuel handling 2-10
Safety rules – Burn Prevention 2-11
Safety rules 2-12
Seat belt precautions 2-13
Support strut for loader lift arm – Support strut and service link 2-14
Safety signs 2-16
Hand signals 2-40
3 CONTROLS/INSTRUMENTS
ACCESS TO OPERATOR’S PLATFORM
Proper entry and exit 3-1
OPERATOR’S SEAT
Overview 3-3
FORWARD CONTROLS
Front console 3-8
Steering column 3-9
Pedal controls 3-11
Parking brake 3-13
Joystick steering 3-14
LEFT-HAND SIDE CONTROLS
Transmission controls 3-16
RIGHT-HAND SIDE CONTROLS
Overview 3-18
Two function valve 3-20
Three function valve 3-24
Four function valve 3-28
Wrist rest 3-30
EXTERIOR CONTROLS
Hood switch and master disconnect 3-31
INSTRUMENT CLUSTER
Overview 3-35
Status and warning icons 3-36
Display settings 3-46
Keypad 3-47
Operator preferences 3-55
SIDE CONSOLE
Overview 3-64
Switch operations 3-65
Climate controls 3-69
CLIMATE CONTROLS
Cab air louvers 3-71
Windows 3-73
4 OPERATING INSTRUCTIONS
COMMISSIONING THE UNIT
Before starting the engine 4-1
Run in period of a new machine 4-2
STARTING THE UNIT
Starting the engine 4-3
Operating in extreme temperatures 4-5
Cold temperature operation 4-6
Transport/service link 4-8
STOPPING THE UNIT
Stopping the engine 4-11
MOVING THE UNIT
Before operating the transmission 4-13
Ride control 4-14
Control levers 4-15
Auxiliary forward, neutral, reverse (F-N-R) switch 4-20
Automatic mode 4-24
Loader functions 4-25
5 TRANSPORT OPERATIONS
RECOVERY TRANSPORT
Safety rules 5-1
Transporting the machine 5-2
Travelling on public roads 5-5
Moving a disabled machine 5-8
6 WORKING OPERATIONS
LOADER OPERATIONS
Operating tips 6-1
Joystick operation 6-4
7 MAINTENANCE
GENERAL INFORMATION
Servicing 7-1
Support strut for loader lift arm 7-4
Releasing pressure in the hydraulic system 7-7
Fluids and lubricants 7-9
Biodiesel fuel – Biodiesel fuels 7-15
Selective catalytic reduction (SCR) system 7-17
Selective Catalytic Reduction (SCR) exhaust treatment – Basic instructions 7-22
MAINTENANCE CHART
Maintenance Chart 7-23
Daily inspection
General 7-25
Every 10 hours
Engine oil level 7-29
Every 50 hours
Bucket/attachment grease fittings 7-30
Hydraulic oil level 7-31
Transmission oil level 7-32
Engine coolant 7-34
Initial 100 hours
Wheel torque 7-35
Axle cooler filters (if equipped) 7-36
Selective Catalytic Reduction – Clean in-line supply filter (Initial) 7-38
Fuel filter (Initial) 7-39
Fuel filters – Replace 7-40
Replace hydraulic oil filter (Initial) 7-42
Every 100 hours
Grease fittings 7-43
Grease machine and attachments 7-45
Every 250 hours
Grease drive shaft slip joints 7-47
Cab air filter – Recirculation filter 7-48
Engine accessory drive belt 7-50
Wheels and tires 7-51
Every 500 hours
Engine oil and filter 7-53
Replace fuel prefilter 7-56
Fuel filter 7-57
Fuel tank sediment 7-59
Axle oil level 7-60
Roll over protective structure 7-61
Battery fluid level 7-64
Every 1000 hours
Pivot points 7-65
Articulation fittings 7-66
Drive belt 7-67
Cab air filter – Recirculation filter 7-69
Replacing the engine breather filter 7-71
Engine valve clearance 7-73
Every 1500 hours
Change front and rear axle oil 7-74
Transmission fluid and filters 7-77
Calibrating the gear box 7-80
Transmission declutch pressure adjustment 7-81
Selective catalytic reduction system – Clean in-line DEF supply filter 7-82
Every 2000 hours
Hydraulic oil and filter 7-84
Engine coolant 7-88
Engine air filters 7-90
Frame and cab – lubricate 7-93
Every 3000 hours
Selective catalytic reduction system – replace DEF supply module filter 7-94
As required
Fuel pre-filter 7-96
Clean selective catalytic reduction system DEF tank filter 7-97
Air conditioning condenser 7-99
Height control and return to travel 7-100
Return to dig 7-102
Parking brake 7-104
Secondary steering 7-108
Cab service 7-109
Machine inspection and cleaning 7-112
ELECTRICAL SYSTEM
Battery service 7-113
Battery electrolyte level 7-116
Auxiliary battery connections 7-117
Battery removal and installation 7-119
Fuses and relays 7-120
Work lights 7-125
Driving lights 7-126
Rotating beacon light 7-127
STORAGE
Preparation for storage 7-128
Every 30 days 7-129
Starting up after storage 7-130
8 SPECIFICATIONS
General specifications 8-1
Lift capacities 8-7
Torque charts 8-11
Dimensions specifications 8-13
Weight adjustments 8-46
9 ACCESSORIES
General accessories 9-1

CASE 1021F TIER 4 1121F TIER 4 WHEEL LOADER OPERATOR’S MANUAL 47552848 – PDF DOWNLOAD:

PLEASE NOTE:

• This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
• This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
• Require some other service manual or have any queries: please WRITE to us at [email protected]

S.V