Case 1825 & 1825B Uni-Loader Operators Manual 9-25772 – PDF DOWNLOAD

Description

Case 1825 & 1825B Uni-Loader Operators Manual 9-25772 – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Case 1825 & 1825B Uni-Loader Operators Manual 9-25772 – PDF DOWNLOAD

P.I.N. JAF0140365 and After

TO THE OWNER :

• You are the owner of a Case Uni-Loader that has been designed and built to
  exact quality and safety standards. This Uni-Loader conforms to current safety
  regulations (see “Official Justifying Documents” on next page). However,
  this does not exclude all risk of accidents. That is why it is essential to observe
  elementary safety rules and precautions.
• Read this manual carefully before operating the Uni-Loader. Instructions
  concerning safety, operation and maintenance, have been developed to permit
  safe service and operation of this Uni-Loader. Refer to the Detail Index at the
  end of this manual for locating specific information about your Machine.
• This manual provides information essential to keeping your Uni-Loader in a
  good working condition providing a safe, reliable and durable machine.
• The attachments and equipment available for use with this Uni-Loader are
  intended for general earth moving purposes, handling, boring, ditch digging,
  etc. If the Uni-Loader is to be used for handling loads, make sure the machine
  is suitably equipped for this type of work. The Uni-Loader must be fitted with
  safety valves and an overload indicator and all legal requirements must be
  strictly observed.
• Do not use this Uni-Loader for any application or purpose other than those
  described in this manual. If the Uni-Loader is to be used for duties involving the use
  of special attachments or equipment other than those approved by CASE, it will
  invalidate the CE certification. Any person making unauthorized modifications is
  responsible for the consequences.

TABLE OF CONTENTS:

Case 1825 & 1825B Uni-Loader Operators Manual 9-25772 – PDF DOWNLOAD

1825 UNI-LOADER ® 1
1825B UNI-LOADER ® 1
TO THE OWNER 3
OFFICIAL JUSTIFYING DOCUMENTS (1825) 4
P.I.N 5
ENGINE 5
IDENTIFICATION NUMBERS 5
ROPS 6
LOADER BUCKET 6
MACHINE COMPONENTS 1825 6
MACHINE COMPONENTS 1825 7
MACHINE COMPONENTS 1825B 8
MACHINE COMPONENTS 1825B 9
RIGHT, LEFT, FRONT AND REAR OF MACHINE 10
SAFETY/DECALS/HAND SIGNALS 11
BEFORE OPERATION 12
MACHINE OPERATION 13
FAILURE IN OPERATION 14
PARKING THE MACHINE 14
BURN PREVENTION 15
WHEELS AND TIRE SAFETY 15
FIRE OR EXPLOSION PREVENTION 15
FIRE OR EXPLOSION PREVENTION 16
MAINTENANCE 17
SAFETY DECALS 18
HAND SIGNALS 24
REAR WINDOW – EMERGENCY EXIT 28
GETTING ON AND OFF THE MACHINE 28
INSTRUMENTS AND CONTROLS 29
OPERATOR RESTRAINT SYSTEM 29
SEAT BELT 30
SEAT BARS 31
INSTRUMENT PANEL 32
KEY SWITCH, GLOW PLUG INDICATOR
AND LAMP SWITCH 34
RECOMMENDED TIMES FOR GLOW PLUG OPERATION 1825 36
RECOMMENDED TIMES FOR GLOW PLUG OPERATION 1825B 36
HAND THROTTLE, HORN BUTTON AND SWITCHES 37
TRAVEL/STEERING CONTROLS 39
TRAVEL/STEERING CONTROLS 40
LOADER CONTROLS 41
HAND LEVERS 41
AUXILIARY HYDRAULIC ATTACHMENT CONTROLS 42
TRIM THIS EDGE
TRIM THIS EDGE
LEFT PAGE
OPERATING INSTRUCTIONS 43
DAILY INSPECTION 43
STARTING THE ENGINE 43
RECOMMENDED TIMES FOR GLOW PLUG OPERATION 1825 44
RECOMMENDED TIMES FOR GLOW PLUG OPERATION 1825B 44
RUN-IN PERIOD 45
ENGINE 45
WHEEL NUTS 45
HYDRAULIC FILTER 45
DRIVE CHAINS 45
ROTATING BEACON 45
PREVENTING DAMAGE TO THE HYDROSTATIC TRANSMISSION IN COLD
TEMPERATURES 46
ENGINE SPEED 46
PARKING THE MACHINE AND STOPPING THE ENGINE 46
BOOSTER BATTERY CONNECTION TO MACHINE BATTERY 47
MACHINE OPERATION 48
TRANSPORTING THE MACHINE 49
PRIOR TO LOADING 49
MOVING A DISABLED MACHINE 50
LIFTING THE MACHINE WITH A CRANE 51
OPERATING IN COLD WEATHER 52
OPERATING IN HOT WEATHER 53
JOB SITE OPERATION 53
OPERATING THE LOADER 54
NORMAL USE 54
FILLING AND DUMPING THE BUCKET 54
OPERATING ON A HILLSIDE OR RAMP 55
LOAD IN THE BUCKET 55
BUCKET EMPTY 55
TOOL-TACH 56
INSTALLING A BUCKET OR ATTACHMENT 56
ADJUSTING THE TOOL-TACH 57
BACKHOE OPERATION 58
GENERAL 58
HYDRAULIC POWER FOR THE BACKHOE 59
ENGINE SPEED 59
DIGGING WITH THE BACKHOE 60
FILLING THE BUCKET 60
CORRECT TRENCHING METHOD 60
PROCEDURE TO MOVE THE MACHINE WHEN YOU DIG 61
OBJECT LIFTING WITH THE BACKHOE 62
LUBRICATION/FILTER/FLUIDS 63
SUPPORT STRUT FOR LOADER LIFT ARMS 64
INSTALLING THE SUPPORT STRUT 64
III
TRIM THIS EDGE
TRIM THIS EDGE
RIGHT PAGE
Template Name: OM_1_col
Template Date: 1994_05_26
Alt= to hide template information
Alt+ to display template information
STORING THE SUPPORT STRUT 65
ENGINE HOURMETER 66
MAINTENANCE SCHEDULE 66
FLUIDS AND LUBRICANTS 67
LUBRICATION/MAINTENANCE CHART 68
REAR ACCESS DOOR 69
GREASE FITTINGS (EVERY 10 HOURS) 70
LOADER LIFT ARM AND BUCKET PIVOTS 70
GREASE FITTINGS (EVERY 100 HOURS) 71
MACHINE CONTROL PIVOTS 71
ENGINE OIL SELECTION 72
OIL VISCOSITY/TEMPERATURE RANGES 72
ENGINE LUBRICATION 72
ENGINE LUBRICATION SYSTEM (1825) 73
SERVICE SPECIFICATIONS 73
ENGINE OIL LEVEL 73
OIL CHANGE AND FILTER REPLACEMENT 74
ENGINE LUBRICATION SYSTEM (1825B) 76
SERVICE SPECIFICATIONS 76
ENGINE OIL LEVEL 76
OIL CHANGE AND FILTER REPLACEMENT 77
AIR FILTER SYSTEM 79
SERVICE SPECIFICATIONS 79
DUST CUP 79
WARNING LAMP FOR AIR FILTER RESTRICTION 80
AIR CLEANER ELEMENT 80
CLEANING THE ELEMENT 81
ENGINE COOLING SYSTEM 82
SERVICE SPECIFICATIONS 82
COOLANT SOLUTION 82
COOLANT LEVEL 82
CLEANING COOLING SYSTEM 83
DIESEL FUEL SYSTEM 84
SERVICE SPECIFICATIONS 84
FUEL STORAGE 84
SPECIFICATIONS FOR ACCEPTABLE NO 2 DIESEL FUEL 85
FUEL CONDITIONER 85
FUEL TANK 85
REPLACING THE FUEL FILTER 85
REMOVING AIR FROM THE FUEL SYSTEM 86
HYDRAULIC SYSTEM 88
SERVICE SPECIFICATIONS 88
OIL LEVEL 89
CHECKING THE HYDRAULIC FILTER CONDITION 89
REPLACING THE HYDRAULIC FILTER 90
OIL CHANGE 91
DRIVE CHAIN COMPARTMENT 92
SERVICE SPECIFICATIONS 92
OIL LEVEL 92
OIL CHANGE 92
TIRE AND RIM SERVICE 93
MAINTENANCE AND ADJUSTMENTS 93
TIRE PRESSURE 94
INFLATING THE TIRE 94
WHEEL NUTS 95
TILTING THE OPERATORS COMPARTMENT FORWARD 96
TILTING OPERATORS COMPARTMENT INTO OPERATING POSITION 97
TESTING THE SEAT BARS 98
LOCK FOR LOADER CONTROLS 98
LOCK FOR MACHINE MOVEMENT 98
DRIVE CHAINS 99
CHECKING THE DRIVE CHAIN TENSION 99
ADJUSTING THE DRIVE CHAINS 101
MAINTENANCE OF THE SEAT BELT 103
SPARK ARRESTER MUFFLER 104
ROLL-OVER PROTECTION STRUCTURE 105
ROPS LABEL 105
SEAT BELT 105
MAINTENANCE AND INSPECTION OF ROPS 105
DAMAGE TO THE ROPS 106
TORQUE SPECIFICATIONS FOR ROPS 107
TORQUE SPECIFICATIONS FOR SEAT AND SEAT BELT 108
ELECTRICAL SYSTEM 109
ALTERNATOR CHARGING SYSTEM 109
BATTERY SERVICE 110
BATTERY FLUID LEVEL 111
CLEANING THE BATTERY 112
WORK LAMPS 113
ROAD LAMPS 113
FUSES AND STARTER RELAY 114
STORAGE 115
STORAGE PREPARATION 115
CHAIN COMPARTMENTS 115
REMOVAL FROM STORAGE 116
ENGINE (1825 ONLY) 117
ENGINE (1825B ONLY) 117
SPECIFICATIONS 117
COOLING SYSTEM 118
HYDRAULIC SYSTEM 118
OPERATING WEIGHTS 118
RIGHT PAGE
POWER TRAIN 118
ADDITIONAL WEIGHTS FOR OPTIONAL EQUIPMENT 119
LOADER BUCKETS 119
ELECTRICAL SYSTEM 120
1825 NOISE LEVEL TO E E C 86/662 120
OPERATING DATA AND DIMENSIONS 121
AFTER DELIVERY CHECK 123
AFTER DELIVERY CHECK 125
ALPHABETICAL INDEX 127

Need help? Contact: [email protected]

PLEASE NOTE:

• This is the SAME MANUAL used by the dealerships to diagnose your vehicle
• No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
• Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
• So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com

S.V