Case 580T 580ST 590ST 695ST Loader Backhoes Operator’s Manual 84392822 – PDF DOWNLOAD

Description

Case 580T 580ST 590ST 695ST Loader Backhoes Operator’s Manual 84392822 – PDF DOWNLOAD

DESCRIPTION:

Case 580T 580ST 590ST 695ST Loader Backhoes Operator’s Manual 84392822 – PDF DOWNLOAD

FOREWORD :

• Loader backhoes 580T – 580ST – 590ST – 695ST have been designed to perform most earth-moving operations. If you use this machine for duties involving the use of attachments, accessories, or special tools, consult your Dealer to make sure that the adaptations or modifications carried out are in conformity with the machine’s technical specifications and with current regulations on safety.
• Any modifications or adaptations which are not approved by the manufacturer may invalidate the machine’s original conformity with safety requirements.

INTENDED USE :

• This machine has been built with the most advanced technology and in accordance with recognized safety rules. The machine must be used according to its intended use, respecting the safety and precautionary rules and strictly following the operating instructions.
• Any functional disorders, especially those affecting the safety of the machine, should therefore be rectified immediately.

TABLE OF CONTENTS:

Case 580T 580ST 590ST 695ST Loader Backhoes Operator’s Manual 84392822 – PDF DOWNLOAD

1 – FOREWORD, SAFETY, PLATES AND DECALS
2 – CONTROLS AND INSTRUMENTS
3 – OPERATING THE MACHINE
4 – SUPPLIES AND MAINTENANCE CHART
5 – TROUBLESHOOTING
6 – STORAGE
7 – ACCESSORIES
8 – DATA AND TECHNICAL SPECIFICATIONS
9 – ALPHABETICAL INDEX
ATTACHMENT 1 – “EC” DECLARATION OF CONFORMITY

SECTION 1
FOREWORD, SAFETY, PLATES AND DECALS……………………………………………………………………………. 1-1
FOREWORD……………………………………………………………………………………………………………………………. 1-1
INTENDED USE ……………………………………………………………………………………………………………………. 1-1
MAIN COMPONENTS ………………………………………………………………………………………………………………. 1-3
SAFETY INSTRUCTIONS…………………………………………………………………………………………………………. 1-6
GENERAL PRECAUTIONS…………………………………………………………………………………………………….. 1-6
BEFORE USING THE MACHINE…………………………………………………………………………………………….. 1-7
OPERATING THE MACHINE………………………………………………………………………………………………… 1-10
PARKING THE MACHINE…………………………………………………………………………………………………….. 1-13
MAINTENANCE AND ADJUSTMENTS…………………………………………………………………………………… 1-14
PREVENTION OF FIRE OR EXPLOSIONS…………………………………………………………………………….. 1-16
PREVENTION OF BURNS……………………………………………………………………………………………………. 1-17
LEVEL OF VIBRATIONS TRANSMITTED TO THE OPERATOR……………………………………………….. 1-18
PRECAUTIONS FOR WASTE DISPOSAL………………………………………………………………………………. 1-19
COMPONENT IDENTIFICATION PLATES ………………………………………………………………………………… 1-20
DECALS………………………………………………………………………………………………………………………………… 1-25
NOISE LEVEL DECAL …………………………………………………………………………………………………………. 1-25
POSITION OF DECALS ……………………………………………………………………………………………………….. 1-26
HAND SIGNALS …………………………………………………………………………………………………………………….. 1-34
SECTION 2
CONTROLS AND INSTRUMENTS……………………………………………………………………………………………….. 2-1
FRONT CONTROL PANELS (580T / 580ST / 590ST)………………………………………………………………… 2-1
FRONT CONTROL PANELS (695ST)………………………………………………………………………………………. 2-3
CONTROL PANEL AND SIDE INSTRUMENT (580T mechanic motor)…………………………………………. 2-5
CONTROL PANEL AND SIDE INSTRUMENT (580ST / 590ST / 695ST electronic motor) ………………. 2-7
SIDE INSTRUMENT (580T) ………………………………………………………………………………………………….. 2-12
SIDE INSTRUMENT (580ST / 590ST / 695ST)………………………………………………………………………… 2-14
OPERATOR’S COMPARTMENT CONTROLS …………………………………………………………………………… 2-16
STARTER SWITCH KEY………………………………………………………………………………………………………. 2-16
STEERING WHEEL……………………………………………………………………………………………………………… 2-16
DIRECTION INDICATOR SWITCH (580T ROPS) ……………………………………………………………………. 2-17
LEVER FOR DIRECTION INDICATORS, MAIN BEAMS, FRONT WINDSHIELD WIPER AND
WASHER (CAB) ………………………………………………………………………………………………………………….. 2-18
POWERSHUTTLE TRANSMISSION CONTROLS……………………………………………………………………. 2-19
POWERSHIFT TRANSMISSION CONTROLS…………………………………………………………………………. 2-24
LOADER ATTACHMENT CONTROL LEVER………………………………………………………………………….. 2-26
DIFFERENTIAL LOCK SWITCH (2WS) ………………………………………………………………………………….. 2-26
ENGINE ACCELERATOR CONTROLS ………………………………………………………………………………….. 2-27
BRAKES …………………………………………………………………………………………………………………………….. 2-28
WHEEL STEER MODE SWITCH (4WS) …………………………………………………………………………………. 2-29
CAB………………………………………………………………………………………………………………………………………. 2-30
OPERATOR’S SEAT ………………………………………………………………………………………………………………. 2-39
LOADER ATTACHMENT CONTROLS………………………………………………………………………………………. 2-43
LOADER ATTACHMENT OPERATION ………………………………………………………………………………….. 2-43
4×1 LOADER BUCKET CONTROL (If fitted)……………………………………………………………………………. 2-46
LOCKING THE LOADER ATTACHMENT CONTROLS (Specific to certain countries)…………………… 2-47
BACKHOE ATTACHMENT CONTROLS……………………………………………………………………………………. 2-48
BACKHOE ATTACHMENT MECHANICAL CONTROLS VERSION……………………………………………. 2-49
INDEX
BACKHOE ATTACHMENT HYDRAULIC CONTROLS……………………………………………………………… 2-60
HEATING AND AIR CONDITIONING CONTROLS……………………………………………………………………… 2-66
VENTILATION …………………………………………………………………………………………………………………….. 2-66
HEATING (Optional) …………………………………………………………………………………………………………….. 2-66
AIR CONDITIONING (Optional) …………………………………………………………………………………………….. 2-67
VENTS……………………………………………………………………………………………………………………………….. 2-69
SECTION 3
OPERATING THE MACHINE……………………………………………………………………………………………………….. 3-1
GENERAL INSTRUCTIONS………………………………………………………………………………………………………. 3-1
BEFORE USING THE MACHINE…………………………………………………………………………………………….. 3-1
OPERATING THE MACHINE………………………………………………………………………………………………….. 3-2
RUNNING-IN PERIOD …………………………………………………………………………………………………………… 3-3
PARKING THE MACHINE…………………………………………………………………………………………………………. 3-4
STARTING THE ENGINE………………………………………………………………………………………………………….. 3-5
ASSISTED STARTING (JUMP-STARTING) ……………………………………………………………………………… 3-6
STARTING THE ENGINE AT LOW TEMPERATURES WITH “GRID HEATER” (Optional) ……………… 3-8
STARTING THE ENGINE AT TEMPERATURES BELOW -18 °C (-0.4 °F) (Optional) …………………….. 3-9
CODED ANTI-THEFT SWITCH (Optional)………………………………………………………………………………. 3-10
STOPPING THE ENGINE ……………………………………………………………………………………………………….. 3-11
JOB SITE TRAVEL…………………………………………………………………………………………………………………. 3-12
2WD OR 4WD …………………………………………………………………………………………………………………….. 3-14
STEER SELECTION (4WS) ………………………………………………………………………………………………….. 3-15
DIFFERENTIAL LOCK SWITCH ……………………………………………………………………………………………. 3-18
ROAD TRAVEL………………………………………………………………………………………………………………………. 3-20
REQUIREMENTS FOR ROAD TRAVEL…………………………………………………………………………………. 3-20
PRECAUTIONS FOR ROAD TRAVEL……………………………………………………………………………………. 3-21
PREPARING THE MACHINE FOR ROAD TRAVEL…………………………………………………………………. 3-22
SETTING THE BACKHOE ATTACHMENT IN ROAD TRAVEL POSITION………………………………….. 3-27
LOCKING AND UNLOCKING THE BACKHOE ATTACHMENT …………………………………………………. 3-29
OPERATING THE MACHINE IN COLD WEATHER ……………………………………………………………………. 3-30
OPERATING THE MACHINE IN HOT WEATHER………………………………………………………………………. 3-31
OPERATING THE MACHINE IN WATER ………………………………………………………………………………….. 3-31
LOADER ATTACHMENT…………………………………………………………………………………………………………. 3-32
OPERATING THE LOADER ATTACHMENT…………………………………………………………………………… 3-32
LOADER ATTACHMENT SAFETY STRUT …………………………………………………………………………….. 3-38
LOADER ATTACHMENT SAFETY STRUT (2WS) …………………………………………………………………… 3-38
LOADER ATTACHMENT SAFETY STRUT (4WS) …………………………………………………………………… 3-39
LOADER BUCKET – REPLACEMENT ……………………………………………………………………………………. 3-40
LOADER BUCKET WITH FORKS (Optional) …………………………………………………………………………… 3-41
BACKHOE ATTACHMENT………………………………………………………………………………………………………. 3-43
SETTING THE BACKHOE ATTACHMENT IN WORKING POSITION…………………………………………. 3-44
BACKHOE ATTACHMENT SIDESHIFT (Sideshift version) ……………………………………………………….. 3-46
OPERATING THE BACKHOE ATTACHMENT ………………………………………………………………………… 3-48
BACKHOE BUCKET – REPLACEMENT …………………………………………………………………………………. 3-53
BALLASTING………………………………………………………………………………………………………………………. 3-54
LIFTING LOADS…………………………………………………………………………………………………………………….. 3-58
SAFETY INSTRUCTIONS…………………………………………………………………………………………………….. 3-58
LIFTING LOADS WITH THE LOADER ATTACHMENT …………………………………………………………….. 3-59
LIFTING LOADS WITH BACKHOE ATTACHMENT …………………………………………………………………. 3-61
LIFTING THE MACHINE …………………………………………………………………………………………………………. 3-64
MACHINE TRANSPORT (ON A TRAILER)………………………………………………………………………………… 3-65
INDEX
TOWING THE MACHINE ………………………………………………………………………………………………………… 3-66
SECTION 4
SUPPLIES AND MAINTENANCE CHART …………………………………………………………………………………….. 4-1
SUPPLY SUMMARY TABLE……………………………………………………………………………………………………… 4-1
FUEL……………………………………………………………………………………………………………………………………. 4-2
HYDRAULIC OIL …………………………………………………………………………………………………………………… 4-4
SAFETY INSTRUCTIONS…………………………………………………………………………………………………………. 4-6
WORK HOURS AND INTERVALS ……………………………………………………………………………………………… 4-8
HOURMETER……………………………………………………………………………………………………………………….. 4-8
INTERVALS………………………………………………………………………………………………………………………….. 4-9
MAINTENANCE INTERVAL TABLE………………………………………………………………………………………….. 4-10
CHECKS AT START-UP AND BEFORE EACH WORKSHIFT (10 HOURS)…………………………………… 4-13
MACHINE – GENERAL INSPECTION…………………………………………………………………………………….. 4-13
SERVICE BRAKE………………………………………………………………………………………………………………… 4-13
PARKING BRAKE ……………………………………………………………………………………………………………….. 4-13
LIGHTS………………………………………………………………………………………………………………………………. 4-13
FUNCTIONALITY OF CONTROLS AND LAMPS……………………………………………………………………… 4-13
DRIVE BELT – CHECK…………………………………………………………………………………………………………. 4-14
HYDRAULIC SYSTEM – LINES……………………………………………………………………………………………… 4-15
ENGINE OIL – LEVEL…………………………………………………………………………………………………………… 4-16
HYDRAULIC OIL TANK – LEVEL …………………………………………………………………………………………… 4-17
FUEL TANK – LEVEL……………………………………………………………………………………………………………. 4-18
COOLANT – LEVEL ……………………………………………………………………………………………………………… 4-19
WINDSHIELD WASHER FLUID – LEVEL………………………………………………………………………………… 4-20
WHEELS – NUT TIGHTENING………………………………………………………………………………………………. 4-20
WORKING ATTACHMENTS – GREASING ……………………………………………………………………………… 4-21
WEEKLY MAINTENANCE (50 HOURS) ……………………………………………………………………………………. 4-23
FUEL FILTER – DRAINING (580ST / 590ST / 695ST) ………………………………………………………………. 4-23
TYRES – PRESSURE CHECK ………………………………………………………………………………………………. 4-24
AIR CONDITIONING SYSTEM………………………………………………………………………………………………. 4-27
DOOR HINGES – GREASING ……………………………………………………………………………………………….. 4-28
RAILS – GREASING …………………………………………………………………………………………………………….. 4-28
STABILIZERS (SIDESHIFT) – CLEARANCE CHECK……………………………………………………………….. 4-29
MAINTENANCE EVERY 3 MONTHS (250 HOURS)……………………………………………………………………. 4-30
CAB – GENERAL INSPECTION …………………………………………………………………………………………….. 4-31
SEAT AND SEAT BELT – CHECK………………………………………………………………………………………….. 4-32
SEAT SUSPENSION AND RAILS – GREASING………………………………………………………………………. 4-32
CAB AIR FILTER – CLEANING………………………………………………………………………………………………. 4-32
FUEL TANK – DRAINING ……………………………………………………………………………………………………… 4-33
RADIATOR AND CONDENSER – CLEANING…………………………………………………………………………. 4-34
COOLING SYSTEM LINES – CHECK …………………………………………………………………………………….. 4-35
TRANSMISSION OIL – LEVEL ………………………………………………………………………………………………. 4-35
FRONT AXLE – OIL LEVEL …………………………………………………………………………………………………… 4-36
FRONT AXLE BREATHER VALVE – CLEANING……………………………………………………………………… 4-37
FRONT AXLE – GREASING ………………………………………………………………………………………………….. 4-38
REAR AXLE – OIL LEVEL …………………………………………………………………………………………………….. 4-39
REAR AXLE BREATHER VALVE – CLEANING……………………………………………………………………….. 4-40
AXLE ARTICULATIONS – GREASING……………………………………………………………………………………. 4-41
CARDAN SHAFTS – GREASING …………………………………………………………………………………………… 4-42
HYDRAULIC OIL TANK BREATHER/FILLER CAP – CLEANING……………………………………………….. 4-42
BATTERY TERMINALS – CHECK………………………………………………………………………………………….. 4-43
HEATER AND EVAPORATOR (AIR CONDITIONING SYSTEM) – CLEANING ……………………………. 4-44
INDEX
MAINTENANCE EVERY 6 MONTHS (500 HOURS)……………………………………………………………………. 4-45
ENGINE OIL – CHANGE……………………………………………………………………………………………………….. 4-45
ENGINE OIL FILTER – REPLACEMENT…………………………………………………………………………………. 4-47
FUEL FILTER – REPLACEMENT (580T) ………………………………………………………………………………… 4-48
FUEL PREFILTER – REPLACEMENT (580ST / 590ST / 695ST) ……………………………………………….. 4-50
FUEL FILTER – REPLACEMENT (580ST / 590ST / 695ST)………………………………………………………. 4-52
YEARLY MAINTENANCE (1000 HOURS) …………………………………………………………………………………. 4-54
MACHINE – INSPECTION AND CLEANING……………………………………………………………………………. 4-55
FIRE EXTINGUISHER – CHECK……………………………………………………………………………………………. 4-56
ENGINE – VALVE CLEARANCE CHECK (580T) ……………………………………………………………………… 4-56
ENGINE – VALVE CLEARANCE CHECK (580ST / 590ST / 695ST) …………………………………………… 4-57
ENGINE – BREATHER FILTER REPLACEMENT…………………………………………………………………….. 4-57
AIR FILTER – REPLACING MAIN AND SAFETY FILTER ELEMENTS……………………………………….. 4-58
POWERSHUTTLE TRANSMISSION – OIL FILTER REPLACEMENT …………………………………………. 4-60
POWERSHUTTLE TRANSMISSION – OIL CHANGE……………………………………………………………….. 4-61
POWERSHUTTLE TRANSMISSION – SCREEN FILTER CLEANING…………………………………………. 4-62
POWERSHIFT TRANSMISSION – OIL FILTER REPLACEMENT………………………………………………. 4-63
POWERSHIFT TRANSMISSION – OIL CHANGE…………………………………………………………………….. 4-64
FRONT AXLE – OIL CHANGE……………………………………………………………………………………………….. 4-65
REAR AXLE – OIL CHANGE …………………………………………………………………………………………………. 4-67
BRAKE PEDAL LEVER – GREASING…………………………………………………………………………………….. 4-68
HYDRAULIC OIL SYSTEM – OIL FILTER REPLACEMENT ………………………………………………………. 4-69
HYDRAULIC OIL TANK – OIL CHANGE …………………………………………………………………………………. 4-70
HYDRAULIC CYLINDERS – CHECK………………………………………………………………………………………. 4-72
BATTERY – CHARGE AND ELECTROLYTE LEVEL CHECK ……………………………………………………. 4-73
ALTERNATOR – CHECK………………………………………………………………………………………………………. 4-74
STARTER MOTOR – CHECK………………………………………………………………………………………………… 4-74
MAINTENANCE EVERY 2 YEARS (2000 HOURS)…………………………………………………………………….. 4-75
COOLANT – CHANGE………………………………………………………………………………………………………….. 4-75
MAINTENANCE WHEN NECESSARY………………………………………………………………………………………. 4-77
DRIVE BELT – REPLACEMENT…………………………………………………………………………………………….. 4-78
TURBOCHARGER ………………………………………………………………………………………………………………. 4-79
FUEL SYSTEM – BLEEDING (580T)………………………………………………………………………………………. 4-80
FUEL SYSTEM – BLEEDING (580ST / 590ST / 695ST) ……………………………………………………………. 4-81
AIR PREFILTER – CLEANING ………………………………………………………………………………………………. 4-83
AIR FILTER ELEMENTS – CLEANING AND REPLACEMENT…………………………………………………… 4-84
WHEEL/TYRE – REPLACEMENT ………………………………………………………………………………………….. 4-88
WHEEL TOE-IN – ADJUSTMENT ………………………………………………………………………………………….. 4-89
PARKING BRAKE – ADJUSTMENT……………………………………………………………………………………….. 4-91
HYDRAULIC SYSTEM – PRESSURE RELEASE……………………………………………………………………… 4-92
HYDRAULIC FITTINGS AND LINES – REPLACEMENT …………………………………………………………… 4-93
BULBS – REPLACEMENT…………………………………………………………………………………………………….. 4-93
FUSES – REPLACEMENT…………………………………………………………………………………………………….. 4-96
FUSES AND RELAYS – POWERSHUTTLE ROPS (580T mechanical engine) …………………………….. 4-97
FUSES AND RELAYS – POWERSHUTTLE CAB (580T mechanical motor) ………………………………… 4-98
FUSES AND RELAYS – POWERSHUTTLE CAB (580ST / 590ST electronic motor) …………………….. 4-99
FUSES AND RELAYS – POWERSHIFT CAB (2WS) ………………………………………………………………. 4-100
FUSES AND RELAYS – POWERSHIFT CAB (4WS) ………………………………………………………………. 4-101
BATTERY – REPLACEMENT………………………………………………………………………………………………. 4-102
STABILIZERS (SIDESHIFT) – CLEARANCE CHECK AND ADJUSTMENT ……………………………….. 4-103
TELESCOPIC DIPPER (If equipped) – DRAINING………………………………………………………………….. 4-103
BUCKET TEETH – REPLACEMENT …………………………………………………………………………………….. 4-104
LOADER BUCKET – SELF-LEVELLING (580T – 590ST “STRAIGHT LOADER ARM” MODELS)….. 4-105
LOADER BUCKET – “RETURN TO DIG” SYSTEM…………………………………………………………………. 4-106
INDEX
SECTION 5
TROUBLESHOOTING ………………………………………………………………………………………………………………… 5-1
ENGINE ………………………………………………………………………………………………………………………………….. 5-2
STARTER MOTOR………………………………………………………………………………………………………………… 5-6
ALTERNATOR………………………………………………………………………………………………………………………. 5-7
TRANSMISSION………………………………………………………………………………………………………………………. 5-8
AXLES ………………………………………………………………………………………………………………………………….. 5-13
STEERING SYSTEM………………………………………………………………………………………………………………. 5-19
HYDRAULIC SYSTEM ……………………………………………………………………………………………………………. 5-20
LOADER ATTACHMENT………………………………………………………………………………………………………. 5-21
BACKHOE ATTACHMENT……………………………………………………………………………………………………. 5-22
SWING……………………………………………………………………………………………………………………………….. 5-23
HYDRAULIC PUMP……………………………………………………………………………………………………………… 5-24
ELECTRICAL SYSTEM…………………………………………………………………………………………………………… 5-25
CAB………………………………………………………………………………………………………………………………………. 5-26
AIR CONDITIONING ……………………………………………………………………………………………………………. 5-26
SECTION 6
STORAGE …………………………………………………………………………………………………………………………………. 6-1
MACHINE STORAGE……………………………………………………………………………………………………………….. 6-1
TAKING THE MACHINE BACK TO SERVICE …………………………………………………………………………… 6-2
SECTION 7
ACCESSORIES………………………………………………………………………………………………………………………….. 7-1
MECHANICAL LOADER BUCKET QUICK COUPLER ………………………………………………………………….. 7-1
MECHANICAL BACKHOE BUCKET QUICK COUPLER ……………………………………………………………….. 7-2
HYDRAULIC BACKHOE BUCKET QUICK COUPLER ………………………………………………………………….. 7-3
BACKHOE ATTACHMENT AUXILIARY HYDRAULIC TOOLS……………………………………………………….. 7-4
MANUAL AUXILIARY HYDRAULIC TOOLS ………………………………………………………………………………… 7-5
BACKHOE ATTACHMENT SAFETY VALVES……………………………………………………………………………… 7-6
REVERSIBLE STABILIZER PADS (CENTER PIVOT)…………………………………………………………………… 7-6
SECTION 8
DATA AND TECHNICAL SPECIFICATIONS …………………………………………………………………………………. 8-1
DIESEL ENGINE ……………………………………………………………………………………………………………………… 8-1
72 kW – 97 HP ENGINE (580T) ……………………………………………………………………………………………….. 8-1
72 kW – 97 HP ENGINE (580ST)……………………………………………………………………………………………… 8-2
82 kW – 110 HP ENGINE (590ST / 695ST) ……………………………………………………………………………….. 8-3
TRANSMISSION………………………………………………………………………………………………………………………. 8-4
2WD/2WS TRANSMISSION – POWERSHUTTLE (580T) ……………………………………………………………. 8-4
4WD/2WS TRANSMISSION – POWERSHUTTLE (580ST / 590ST)……………………………………………… 8-4
4WD/2WS TRANSMISSION – POWERSHIFT (580ST / 590ST)…………………………………………………… 8-4
4WD/4WS TRANSMISSION – POWERSHIFT (695ST)……………………………………………………………….. 8-4
AXLES ……………………………………………………………………………………………………………………………………. 8-5
FRONT AXLES……………………………………………………………………………………………………………………… 8-5
REAR AXLES ……………………………………………………………………………………………………………………….. 8-5
BRAKES …………………………………………………………………………………………………………………………………. 8-6
SERVICE BRAKES ……………………………………………………………………………………………………………….. 8-6
PARKING BRAKE …………………………………………………………………………………………………………………. 8-6
INDEX
STEERING………………………………………………………………………………………………………………………………. 8-6
POWER STEERING………………………………………………………………………………………………………………. 8-6
HYDRAULIC SYSTEM ……………………………………………………………………………………………………………… 8-7
GEAR PUMP ………………………………………………………………………………………………………………………… 8-7
VARIABLE-FLOW-RATE PUMP ……………………………………………………………………………………………… 8-7
FRONT COUNTERWEIGHT ……………………………………………………………………………………………………… 8-7
COUNTERWEIGHT – 2WS……………………………………………………………………………………………………… 8-7
COUNTERWEIGHT – 4WS……………………………………………………………………………………………………… 8-7
NOISE AND VIBRATION LEVELS ……………………………………………………………………………………………… 8-8
NOISE LEVEL ………………………………………………………………………………………………………………………. 8-8
VIBRATION LEVEL INSIDE THE CAB……………………………………………………………………………………… 8-8
BUCKETS……………………………………………………………………………………………………………………………….. 8-8
LOADER BUCKETS………………………………………………………………………………………………………………. 8-8
BACKHOE BUCKETS ……………………………………………………………………………………………………………. 8-8
TYRES……………………………………………………………………………………………………………………………………. 8-9
TYRE TYPES ……………………………………………………………………………………………………………………….. 8-9
NUT TORQUES…………………………………………………………………………………………………………………….. 8-9
DIMENSIONS AND PERFORMANCE……………………………………………………………………………………….. 8-10
DIMENSIONS – 2WS SIDESHIFT ………………………………………………………………………………………….. 8-10
DIMENSIONS – 2WS SIDESHIFT (“STRAIGHT LOADER ARM” models) ……………………………………. 8-11
DIMENSIONS – 4WS SIDESHIFT ………………………………………………………………………………………….. 8-12
DIMENSIONS – 4WS CENTER PIVOT …………………………………………………………………………………… 8-13
LOADER ATTACHMENT PERFORMANCE ……………………………………………………………………………. 8-14
PERFORMANCE OF LOADER BUCKET WITH FORKS…………………………………………………………… 8-17
BACKHOE ATTACHMENT PERFORMANCE………………………………………………………………………….. 8-19
MAXIMUM LIFTING LOADS…………………………………………………………………………………………………….. 8-22
LOADER ATTACHMENT MAXIMUM LIFTING LOAD TABLE ……………………………………………………. 8-22
BACKHOE ATTACHMENT MAXIMUM LIFTING LOAD TABLE …………………………………………………. 8-23
SECTION 9
ALPHABETICAL INDEX……………………………………………………………………………………………………………… 9-1
ATTACHMENT 1 – “EC” DECLARATION OF CONFORMITY

IMAGES PREVIEW OF THE MANUAL:

Contact us: [email protected]

https://vimeo.com/720620819

PLEASE NOTE:

• This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
• The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
• Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer

S.V