Case 621F Tier 4 Wheel Loader Operator’s Manual 47552817 – PDF DOWNLOAD

Description

Case 621F Tier 4 Wheel Loader Operator’s Manual 47552817 – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Case 621F Tier 4 Wheel Loader Operator’s Manual 47552817 – PDF DOWNLOAD

GENERAL INFORMATION :
Note to the Owner [52289098] 

• Read this manual before you start the engine or operate the machine. If you need more information, see your CASE
  CONSTRUCTION dealer.
• This manual contains important information about the safe operation, adjustment, and maintenance of your machine.
• Refer to the index at the back of this manual for locating specific items about your machine.
• Read this manual carefully, paying particular attention to the instructions concerning safety, operation and maintenance
  so as to avoid the risk of injury while operating or servicing the machine. The machine has been designed and
  manufactured according to the strictest quality standards and complies with the standard 2006/42/EC. However, the
  risk of accidents can never be completely excluded. That is why it is essential to observe elementary safety rules and
  precautions.
• Consult an authorized dealer or CNH Italia S.p.A. on changes, additions, or modifications that can be required for this
  machine to comply with various country regulations and safety requirements. Unauthorized modifications will cause
  serious injury or death. Anyone making such unauthorized modifications is responsible for the consequences.
• The information in this manual is provided on the basis of information that was available at the time the manual was
  written. Settings, procedures, part numbers, software and other items can change. These changes can affect the
  maintenance performed on the machine. Ensure that you have complete and current information from your dealer
  before you start any machine operation.
• All data in this manual is subject to production variations. Dimensions and weights are provided with approximate
  values and the machine fitting shown in the illustrations may not correspond with standards models. For precise
  information on specific machine models and versions, please contact your CASE CONSTRUCTION dealer

TABLE OF CONTENTS:

Case 621F Tier 4 Wheel Loader Operator’s Manual 47552817 – PDF DOWNLOAD

1 GENERAL INFORMATION
Note to the Owner 1-1
Declaration of conformity 1-5
Noise level 1-7
Vehicle vibration levels 1-8
Operator’s manual and Quick Reference Guide storage 1-9
Right, left, front, and rear of the machine 1-11
Machine Components 1-12
Note to the Owner 1-14
Identification numbers 1-15
Electro-Magnetic Compatibility (EMC) 1-18
2 SAFETY INFORMATION
Safety rules and signal word definitions 2-1
Personal safety 2-2
Safety rules – Utility safety 2-3
Safety rules 2-4
Safety rules 2-5
Safety rules 2-6
Operating precautions 2-7
Maintenance precautions 2-9
Safety rules – Fuel handling 2-10
Burn prevention 2-11
Safety rules 2-12
Seat belt precautions 2-13
Support strut for loader lift arm – Support strut and service link 2-14
Safety signs 2-16
3 CONTROLS/INSTRUMENTS
ACCESS TO OPERATOR’S PLATFORM
Proper entry and exit 3-1
Overview 3-3
FORWARD CONTROLS
Front console 3-8
Steering column 3-9
Pedal controls 3-11
Parking brake 3-13
LEFT-HAND SIDE CONTROLS
Transmission controls 3-14
Joystick steering 3-16
RIGHT-HAND SIDE CONTROLS
Overview 3-18
Two function valve 3-20
Three function valve 3-24
Four function valve 3-28
Wrist rest 3-30
EXTERIOR CONTROLS
Hood switch and master disconnect 3-31
INSTRUMENT CLUSTER
Overview 3-35
Status and warning icons 3-36
Display settings 3-46
Keypad 3-48
Operator preferences 3-56
SIDE CONSOLE
Overview 3-65
Switch operations 3-66
Climate controls 3-70
CLIMATE CONTROLS
Cab air louvers 3-72
Windows 3-74
4 OPERATING INSTRUCTIONS
COMMISSIONING THE UNIT
Before starting the engine 4-1
Run in period of a new machine 4-2
STARTING THE UNIT
Starting the engine 4-3
Operating in extreme temperatures 4-5
Cold temperature operation 4-6
Transport/service link 4-9
STOPPING THE UNIT
Stopping the engine 4-12
MOVING THE UNIT
Before operating the transmission 4-14
Ride control 4-15
Control levers 4-16
Auxiliary forward, neutral, reverse (F-N-R) switch 4-21
Automatic mode 4-25
Loader functions 4-26
5 TRANSPORT OPERATIONS
RECOVERY TRANSPORT
Safety rules 5-1
Transporting the machine 5-2
Travelling on public roads 5-5
6 WORKING OPERATIONS
LOADER OPERATIONS
Operating tips 6-1
Changing loader attachments 6-4
Coupling to the attachment 6-6
Uncoupling the attachment 6-8
Joystick operation 6-11
7 MAINTENANCE
GENERAL INFORMATION
Servicing 7-1
Support strut for loader lift arm 7-4
Releasing pressure in the hydraulic system 7-6
Fluids and lubricants 7-8
Biodiesel fuel – Biodiesel fuels 7-13
Selective catalytic reduction (SCR) system 7-15
Selective Catalytic Reduction (SCR) exhaust treatment – Basic instructions 7-20
MAINTENANCE CHART
Maintenance Chart 7-21
Daily inspection
General 7-23
Every 10 hours
Engine oil 7-27
Every 50 hours
Bucket/attachment grease fittings 7-28
Grease machine and attachments 7-29
Hydraulic oil level 7-31
Transmission oil level 7-32
Engine coolant 7-33
Initial 100 hours
Wheel torque 7-34
Selective Catalytic Reduction – Clean in-line supply filter (Initial) 7-35
Fuel prefilter (Initial) 7-36
Fuel filter (Initial) 7-37
Replace hydraulic oil filter (Initial) 7-38
Every 100 hours
Grease fittings 7-39
Grease lift arm 7-41
Every 250 hours
Grease drive shaft slip joints 7-42
Cab air filter – Recirculation filter 7-43
Wheels and tires 7-45
Every 500 hours
Engine oil and filter 7-47
Replace fuel prefilter 7-49
Fuel filter 7-50
Fuel tank sediment 7-51
Axle oil level 7-52
Roll over protective structure 7-53
Battery fluid level 7-56
Every 1000 hours
Pivot points 7-57
Articulation fittings 7-58
Hydraulic oil filter 7-59
Drive belt 7-60
Cab air filter – Recirculation filter 7-62
Replacing the engine breather filter 7-64
Every 1500 hours
Front and rear axle 7-65
Transmission fluid and filter 7-67
Selective catalytic reduction system – Clean in-line DEF supply filter 7-69
Calibrating the gear box 7-70
Transmission declutch pressure adjustment 4-speed transmission only 7-72
Every 2000 hours
Hydraulic oil and filters 7-73
Engine coolant 7-75
Engine air filters 7-77
Frame and cab – lubricate 7-79
Engine valve clearance 7-80
Every 3000 hours
Selective Catalytic Reduction System – Replace supply module filter 7-81
As required
Fuel pre-filter 7-83
Selective catalytic reduction system – Clean tank filter 7-84
Air conditioning condenser 7-86
Height control and return to travel 7-87
Return to dig 7-89
Parking brake 7-91
Secondary steering 7-95
Cab service 7-96
ELECTRICAL SYSTEM
Battery service 7-99
Battery electrolyte level 7-102
Auxiliary battery connections 7-103
Battery removal and installation 7-105
Fuses and relays 7-106
Work lights 7-112
Driving lights 7-113
Additional features 7-114
STORAGE
Preparation 7-115
Every 30 days 7-116
Starting up after storage 7-117
8 SPECIFICATIONS
General specifications 8-1
Lift capacities 8-4
Machine specifications and dimensions 621F General specifications 8-7
Weight adjustments 8-25
Material weights 8-26
Torque charts 8-27
9 ACCESSORIES
General accessories 9-1

Need help? Contact: [email protected]

https://vimeo.com/726979518

PLEASE NOTE:

• This is the SAME MANUAL used by the dealerships to diagnose your vehicle
• No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
• Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
• So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com

S.V