Case 9050B Excavator Operators Manual 9-29291 – PDF DOWNLOAD

Description

Case 9050B Excavator Operators Manual 9-29291 – PDF DOWNLOAD

DESCRIPTION:

Case 9050B Excavator Operators Manual 9-29291 – PDF DOWNLOAD

TO THE OWNER :

• This manual contains important information about the safe operation, adjustment,
  service and maintenance of your Case Excavator. Do not operate or permit anyone
  else to operate or service this machine until you or the other persons have read this
  manual. Use only trained operators who have demonstrated the ability to operate and
  service this machine correctly and safely.
• This excavator, with standard attachments and equipment, is intended to be used for
  below ground level digging and general earth moving purposes, such as trenching,
  truck loading, material rehandling, and ditch cleaning.
  If this excavator is to be used to lift loads, for safety purposes it is recommended that
  the machine is properly equipped. Contact your Case dealer and install a “Load
• Holding Control Device” on your machine’s boom cylinders. This system prevents the
  sudden lowering of the load in the event of a failure of a hydraulic hose, line, or fitting
  in the boom hydraulic system. Such a failure can cause personal injury or death.
• Read “Lifting Loads with the Machine” in this manual and follow the instructions and
  safety precautions. See page 78.
• Do not use this machine for any application or purpose other than those described in
  this manual. If the machine is to be used in an application that involves special
  attachments or equipment, such as forestry, demolition, etc., consult an authorized
• Case dealer or the Case Corporation. Changes, additions, or modifications can be
  required for the machine to comply with safety requirements. Unauthorized
  modifications can cause serious injury or death. Anyone making such unauthorized
  modifications is responsible for the consequences.

TABLE OF CONTENTS:

Case 9050B Excavator Operators Manual 9-29291 – PDF DOWNLOAD

TO THE OWNER …………………………………………………………………………………………………… 1
RIGHT, LEFT, FRONT, AND REAR SIDES OF THE MACHINE …………………………………. 3
IDENTIFICATION NUMBERS ………………………………………………………………………………. 3
MACHINE COMPONENTS ……………………………………………………………………………… 4, 5
SAFETY/ DECALS/ HAND SIGNALS ………………………………………………………………………. 7
SAFETY RULES ………………………………………………………………………………………………… 7
BEFORE OPERATION ……………………………………………………………………………………….. 8
MACHINE OPERATION ……………………………………………………………………………………. 10
PARKING THE MACHINE …………………………………………………………………………………. 12
BURN PREVENTION ……………………………………………………………………………………….. 12
FIRE OR EXPLOSION PREVENTION …………………………………………………………………. 13
MAINTENANCE ………………………………………………………………………………………………. 14
SAFETY DECALS ……………………………………………………………………………………………. 16
HAND SIGNALS ………………………………………………………………………………………… 25, 26
INSTRUMENTS AND CONTROLS ………………………………………………………………………….. 27
LOCATION OF COMPONENTS …………………………………………………………………………. 27
HAND AND FOOT CONTROLS ………………………………………………………………………….. 28
STANDARD CONTROLS ………………………………………………………………………………….. 29
OPTIONAL CONTROLS ……………………………………………………………………………………. 30
RIGHT FRONT CONTROL PANEL ……………………………………………………………………… 32
LEFT FRONT CONTROL PANEL ……………………………………………………………………….. 36
SYSTEMS DISPLAY PANEL ……………………………………………………………………………… 38
RIGHT REAR CONTROL PANEL ……………………………………………………………………….. 44
LEFT REAR CONTROL PANEL …………………………………………………………………………. 45
OPERATION OF HEATING AND AIR CONDITIONING (If Equipped) ………………………… 46
AM / FM RADIO ………………………………………………………………………………………………. 48
OPERATOR’S SEAT ………………………………………………………………………………………… 49
SEAT BELT …………………………………………………………………………………………………….. 50
CAB WINDOW AND DOOR CONTROLS ……………………………………………………………… 51
ANTI-VANDAL GUARD …………………………………………………………………………………….. 54
OPERATING INSTRUCTIONS ……………………………………………………………………………….. 55
RUN-IN PERIOD OF A NEW MACHINE ………………………………………………………………. 55
ENGINE OPERATION ………………………………………………………………………………………. 55
ENGINE STARTING AID …………………………………………………………………………………… 60
MACHINE OPERATION ……………………………………………………………………………………. 62
DRIVING THE MACHINE ………………………………………………………………………………….. 63
AUXILIARY ATTACHMENT OPERATION …………………………………………………………….. 69
DISABLED MACHINE ………………………………………………………………………………………. 79
TRANSPORTING THE MACHINE ON A TRAILER ………………………………………………… 79
OPERATING IN HOT WEATHER ……………………………………………………………………….. 82
OPERATING IN COLD WEATHER ……………………………………………………………………… 82
MACHINE STORAGE ……………………………………………………………………………………….. 84
FILTERS/FLUIDS ……………………………………………………………………………. 87
GENERAL SAFETY BEFORE YOU SERVICE ………………………………………………………. 87
ENVIRONMENT ………………………………………………………………………………………………. 87
90508 LUBRICATION CHART ……………………………………………………………………………. 89
FLUIDS AND LUBRICATANTS ……………………………………………………………………………. 91
SERVICE SCHEDULE ………………………………………………………………………………………. 92
HYDRAULIC FLUID CHART ………………………………………………………………………………. 94
ENGINE OIL RECOMMENDATIONS …………………………………………………………………… 95
SYSTEMGARD LUBRICATION ANALYSIS PROGRAM ………………………………………….. 96
GREASE FITTINGS …………………………………………………………………………………………. 97
ENGINE LUBRICATION SYSTEM (CUMMINS M11-C265 ENGINE) ……………………….. 100
AIR FILTER SYSTEM ……………………………………………………………………………………… 102
ENGINE COOLING SYSTEM (CUMMINS M11-C265 ENGINE) ……………………………… 105
DIESEL FUEL SYSTEM (CUMMINS M11-C265 ENGINE) …………………………………….. 110
HYDRAULIC SYSTEM ……………………………………………………………………………………. 112
SWING GEARBOX …………………………………………………………………………………………. 121
FINAL DRIVE GEARBOXES …………………………………………………………………………….. 122
MAINTENANCE AND ADJUSTMENTS …………………………………………………………………… 123
DRIVE BEL TS ……………………………………………………………………………………………….. 123
-I
::D AIR PRESSURE RESERVOIR ………………………………………………………………………….. 127
S:: WINDSHIELD WASHER RESERVOIR ……………………………………………………………….. 127
:i TESTING THE ACCUMULATOR ………………………………………………………………………. 128
en TRACKS ……………………………………………………………………………………………………….. 130
m TRACK SHOE BOLTS …………………………………………………………………………………….. 133
0
G) BUCKET INSTALLATION ………………………………………………………………………………… 134
m WELDING ON THE MACHINE ………………………………………………………………………….. 134
FIRE EXTINGUISHER …………………………………………………………………………………….. 135
SEAT BELT …………………………………………………………………………………………………… 136
PLASTIC AND RESIN PARTS ………………………………………………………………………….. 136
CAB AIR FILTER …………………………………………………………………………………………… 137
ELECTRICAL SYSTEM ……………………………………………………………………………………….. 139
BATTERIES ………………………………………………………………………………………………….. 139
FUSES …………………………………………………………………………………………………………. 142
SPECIFICATIONS ………………………………………………………………………………………………. 143
CUMMINS ENGINE (M11-C265) DATA …………………………………………………………….. 143
DIMENSIONS ………………………………………………………………………………………………… 144
OPERATING DATA ………………………………………………………………………………………… 146
WEIGHTS …………………………………………………………………………………………………….. 147
LIFTING CAPACITIES …………………………………………………………………………………….. 149
2.63 m (8 ft 8 in) SHORT ARMS (STANDARD), H (HEAVY),
or L (LIGHT) MODE ………………………………………………………………………………………… 150
2.63 M (8 ft 8 in) SHORT ARM F (FINE) MODE ………………………………………………….. 151
II
SPECIFICATIONS (CONT.)
3.23 m (10 ft 7 in) STANDARD ARMS (STANDARD), H (HEAVY),
or L (LIGHT) MODE ………………………………………………………………………………………… 152
3.23 m (10 ft 7 in) STANDARD ARM F (FINE) MODE …………………………………………… 153
4.03 m (13 ft 3 in) LONG ARMS (STANDARD), H (HEAVY),
or L (LIGHT) MODE ………………………………………………………………………………………… 154
4.03 m (13 ft 3 in) LONG ARM F (FINE) MODE …………………………………………………… 155
BUCKETS …………………………………………………………………………………………………….. 156
BOLT TORQUES …………………………………………………………………………………………… 158
AFTER DELIVERY CHECK ……………………………………………………………………………. 161, 163
ALPHABETICAL INDEX ……………………………………………………………………………………… 165

IMAGES PREVIEW OF THE MANUAL:

Need help? Contact: [email protected]

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.V