Case 9050B Excavator Service Repair Manual (7-64192) Case 9050B – PDF Download

Description

Case 9050B Excavator Service Repair Manual (7-64192) Case 9050B

CASE 9050B EXCAVATOR SERVICE REPAIR MANUAL (7-64192) CASE 9050B – PDF DOWNLOAD:

IMAGE PREVIEW:

DESCRIPTION:

Case 9050B Excavator Service Repair Manual (7-64192) Case 9050B

GENERAL INFORMATION:

CLEANING
Clean all metal parts except hearings. in a suitable cleaning solvent or by steam cleaning. Do not use caustic soda for steam cleaning. After cleaning, dry and put oil on all parts. Clean all passages with compressed air. Clean hearings in a suitable cleaning solvent. dry the bearings completely and put Oil on the bearings.
INSPECTION
Check all parts when the parts are disassembled. Replace all parts that have wear or damage. Small scoring or grooves can be removed with a hone or crocus cloth. Complete a visual inspection tor indications of wear. pitting and the replacement of parts necessary to prevent early failures.
BEARINGS
Check bearings for easy action. If bearings have a loose fit or rough action replace the bearing. Wash bearings with a suitable cleaning solvent and permit to air dry. DO NOT DRY BEARINGS WITH COMPRESSED AIR.
NEEDLE BEARINGS
Before you press needle hearings in a bore always remove any metal protrusions in the bore or edge of the bore. Before you press bearings into position put petroleum jelly on the inside and outside diameter of the bearings.
GEARS
Check all gears tor wear and damage. Replace gears that have wear or damage.
OIL SEALS, O—RINGS AND GASKETS
Always install new oil seals. O-rings and gaskets. Put petroleum ielly on seals and O-rings.
SHAFTS
Check all shafts that have wear or damage. Check the bearing and oil seal surfaces of the shafts for damage.
SERVICE PARTS
Always install genuine Case service parts. When ordering reler to the Parts Catalog tor the correct part number of the genuine Case replacement items. Failures due to the use of other than genuine Case replacement parts are not covered by warranty.
LUBRICATION
Only use the oils and lubricants specified in the Operator’s or Service Manuals. Failures due to the use of non-specified oils and lubricants are not covered by warranty.

TABLE OF CONTENTS:

Case 9050B Excavator Service Repair Manual (7-64192) Case 9050B

Table of Contents
......................  2
General
................................  4
Engines
................................ 32
Fuel System
............................ 70
Electrical
............................. 82
Tracks
.................................160
Power Train
............................220
Hydraulic System
.......................276
Mounted Equipment
......................620
Hydraulic and Electrical Schematic
 ....784

PLEASE NOTE:

⦁ This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
⦁ Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.