Case 9060B Excavator Operators Manual 9-29381 – PDF DOWNLOAD

Description

Case 9060B Excavator Operators Manual 9-29381 – PDF DOWNLOAD

DESCRIPTION:

Case 9060B Excavator Operators Manual 9-29381 – PDF DOWNLOAD

TO THE OWNER:

This manual contains important information about the safe operation, adjustment, service and maintenance of your Case Excavator. Do not operate or permit anyone else to operate or service this machine until you or the other persons have read this manual.

• Use only trained operators who have demonstrated the ability to operate and service this machine correctly and safely. RP95G131 This excavator, with standard attachments and equipment, is intended to be used for below ground level digging and general earth moving purposes, such as trenching, truck loading, material rehandling, and ditch cleaning.
• If this excavator is to be used to lift loads, for safety purposes it is recommended that the machine be properly equipped. Contact your Case dealer and install a “Load Holding Control Device” on your machine’s boom cylinders. This system prevents the sudden lowering of the load in the event of a failure of a hydraulic hose, line, or fitting in the boom hydraulic system. Such a failure can cause personal injury or death.
• Read “Lifting Loads with the Machine” in this manual and follow the instructions and safety precautions. See page 80. Do not use this machine for any application or purpose other than those described in this manual.
• If the machine is to be used in an application that involves special attachments or equipment, such as forestry, demolition, etc., consult an authorized Case dealer or the Case Corporation.
• Changes, additions, or modifications can be required for the machine to comply with safety requirements. Unauthorized modifications can cause serious injury or death. Anyone making such unauthorized modifications is responsible for the consequences.

TABLE OF CONTENTS:

Case 9060B Excavator Operators Manual 9-29381 – PDF DOWNLOAD

TO THE OWNER …………………………………………………………………………………………………… 1
RIGHT, LEFT, FRONT, AND REAR SIDES OF THE MACHINE …………………………………. 3
IDENTIFICATION NUMBERS ………………………………………………………………………………. 3
MACHINE COMPONENTS ………………………………………………………………………………….. 4
SAFETY/ DECALS/ HAND SIGNALS ………………………………………………………………………. 7
SAFETY RULES ………………………………………………………………………………………………… 7
BEFORE OPERATION ……………………………………………………………………………………….. 8
MACHINE OPERATION ……………………………………………………………………………………. 10
PARKING THE MACHINE …………………………………………………………………………………. 12
BURN PREVENTION ……………………………………………………………………………………….. 12
FIRE OR EXPLOSION PREVENTION …………………………………………………………………. 13
MAINTENANCE ………………………………………………………………………………………………. 14
SAFETY DECALS ……………………………………………………………………………………………. 17
HAND SIGNALS …………………………………………………………………………………………. 26, 27
INSTRUMENTS AND CONTROLS ………………………………………………………………………….. 29
LOCATION OF COMPONENTS …………………………………………………………………………. 29
HAND AND FOOT CONTROLS ………………………………………………………………………….. 30
STANDARD CONTROLS ………………………………………………………………………………….. 31
OPTIONAL CONTROLS ……………………………………………………………………………………. 32
RIGHT fRONT CONTROL PANEL ………………………………………………………………………. 34
LEFT FRONT CONTROL PANEL ……………………………………………………………………….. 38
SYSTEMS DISPLAY PANEL ……………………………………………………………………………… 40
RIGHT REAR CONTROL PANEL ……………………………………………………………………….. 46
LEFT REAR CONTROL PANEL …………………………………………………………………………. 47
OPERATION OF HEATING AND AIR CONDITIONING …………………………………………… 48
AM/ FM RADIO ………………………………………………………………………………………………. 50
OPERATOR’S SEAT ………………………………………………………………………………………… 51
SEAT BELT …………………………………………………………………………………………………….. 52
CAB WINDOWS AND DOOR CONTROLS ……………………………………………………………. 53
ANTI-VANDAL GUARD …………………………………………………………………………………….. 56
OPERATING INSTRUCTIONS ……………………………………………………………………………….. 57
RUN-IN PERIOD OF A NEW MACHINE ………………………………………………………………. 57
ENGINE OPERATION ………………………………………………………………………………………. 57
ENGINE STARTING AID …………………………………………………………………………………… 62
MACHINE OPERATION ……………………………………………………………………………………. 64
DRIVING THE MACHINE ………………………………………………………………………………….. 65
AUXILIARY ATTACHMENT OPERATION …………………………………………………………….. 71
DISABLED MACHINE ………………………………………………………………………………………. 81
TRANSPORTING THE MACHINE ON A TRAILER ………………………………………………… 81
REAR COUNTERWEIGHT REMOVAL AND INSTALLATION …………………………………… 84
OPERATING IN HOT WEATHER ……………………………………………………………………….. 90
OPERATING IN COLD WEATHER ………………………………………………………………… 90, 91
MACHINE STORAGE ……………………………………………………………………………………….. 92
Fl L TE RS/FLUIDS ……………………………………………………………………………. 95
GENERAL SAFETY BEFORE YOU SERVICE ………………………………………………………. 95
ENVIRONMENT ………………………………………………………………………………………………. 95
9060B LUBRICATION CHART ……………………………………………………………………………. 97
SERVICE SCHEDULE …………………………………………………………………………………….. 100
HYDRAULIC FLUID CHART …………………………………………………………………………….. 102
ENGINE OIL RECOMMENDATIONS …………………………………………………………………. 103
SYSTEMGARD LUBRICATION ANALYSIS PROGRAM ………………………………………… 104
GREASE FITTINGS ……………………………………………………………………………………….. 105
ENGINE LUBRICATION SYSTEM (CUMMINS ENGINE M11-C320) ……………………….. 108
AIR FILTER SYSTEM ……………………………………………………………………………………… 110
ENGINE COOLING SYSTEM (CUMMINS ENGINE M11-C320) ………………………. 113, 114
DIESEL FUEL SYSTEM (CUMMINS ENGINE M11-C320) …………………………………….. 118
HYDRAULIC SYSTEM ……………………………………………………………………………………. 120
SWING GEARBOX …………………………………………………………………………………………. 129
FINAL DRIVE GEARBOXES …………………………………………………………………………….. 130
MAINTENANCE AND ADJUSTMENTS …………………………………………………………………… 131
DRIVE BELTS ……………………………………………………………………………………………….. 131
AIR PRESSURE RESERVOIR ………………………………………………………………………….. 135
-I
JJ WINDSHIELD WASHER RESERVOIR ……………………………………………………………….. 135
~ TESTING THE ACCUMULATOR ………………………………………………………………………. 136
:i SETTING THE AUXILIARY COOLING FAN SPEED …………………………………………….. 138
en TRACKS ……………………………………………………………………………………………………….. 140
m TRACK SHOE BOLTS …………………………………………………………………………………….. 143
0c , BUCKET INSTALLATION ………………………………………………………………………………… 144
m WELDING ON THE MACHINE ………………………………………………………………………….. 144
FIRE EXTINGUISHER …………………………………………………………………………………….. 145
SEATBELT …………………………………………………………………………………………………… 146
PLASTIC AND RESIN PARTS ………………………………………………………………………….. 146
CAB AIR FILTER ……………………………………………………………………………………………. 147
ELECTRICAL SYSTEM ……………………………………………………………………………………….. 149
BATTERIES ………………………………………………………………………………………………….. 149
FUSES …………………………………………………………………………………………………………. 152
SPECIFICATIONS ………………………………………………………………………………………………. 153
CUMMINS ENGINE (M 11-C320) DATA …………………………………………………………….. 153
DIMENSIONS ………………………………………………………………………………………………… 154
OPERATING DATA ………………………………………………………………………………………… 156
WEIGHTS …………………………………………………………………………………………………….. 158
LIFTING CAPACITIES …………………………………………………………………………………….. 159
2.5 m (8 ft 3 in) SUPER SHORT ARMS (STANDARD), H (HEAVY), or
L (LIGHT) MODE …………………………………………………………………………………………. 160
3.4 m (11 ft 1 in) SHORT ARMS (STANDARD), H (HEAVY), or
L (LIGHT) MODE …………………………………………………………………………………………. 161
4.0 m (13 ft 1 in) STANDARD ARMS (STANDARD), H (HEAVY), or
L (LIGHT) MODE ………………………………………………………………………………………… 162
II
SPECIFICATIONS (CONTINUED)
5.4 m (17 ft 8 in) LONG ARMS (STANDARD), H (HEAVY), or
L (LIGHT) MODE ………………………………………………………………………………………… 163
2.5 m (8 ft 3 in) SUPER SHORT ARMF (FINE) MODE ………………………………………….. 164
3.4 m (11 ft 1 in) SHORT ARMF (FINE) MODE ……………………………………………………. 165
4.0 m (13 ft 1 in) STANDARD ARMF (FINE) MODE ……………………………………………… 166
5.4 m (17 ft 8 in) LONG ARMF (FINE) MODE ……………………………………………………… 167
BUCKETS …………………………………………………………………………………………………….. 168
BOLT TORQUES ………………………………………………………………………………………….. 169
AFTER DELIVERY CHECK ……………………………………………………………………………. 171, 173
ALPHABETICAL INDEX ………………………………………………………………………………………. 175

IMAGES PREVIEW OF THE MANUAL:

Customer Support: [email protected]

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.V