Case 988 & 1188 Industry Wheeled Excavators Operator’s Manual 9-81420 – PDF DOWNLOAD

Description

Case 988 & 1188 Industry Wheeled Excavators Operator’s Manual 9-81420 – PDF DOWNLOAD

DESCRIPTION:

Case 988 & 1188 Industry Wheeled Excavators Operator’s Manual 9-81420 – PDF DOWNLOAD

TO THE OWNER :

• The machine which you own has been designed and built with quality
  constantly in mind. It conforms to the safety rules currently in
  force. See “Official documents”. Nevertheless, this does not
  exclude all risk of accidents. That is why it is essential to observe
  elementary safety rules and precautions.
• Read this manual carefully and pay particular attention to the
  instructions concerning safety, operation and maintenance, so as
  to avoid all risk of injury while driving or servicing the machine.
• Use this manual as a guide. Your machine will remain a reliable
  working tool as long as it is kept in good working condition and
  serviced properly.
• If the machine is to be used for handling loads (tubing, concrete
  pipe sections, shoring material, etc.), then make sure the machine
  is suitably equipped for this type of work. If this kind of application
  is envisaged, the machine must be fitted with safety valves, an
  overload indicator, a load chart corresponding to the type of
  machine, attachment and a load fixing point. At the same time, all
  legal requirements must be strictly observed.
• Do not use this machine for any application or purpose other than
  those described in this manual. If the machine is to be used for
  duties involving the use of special attachments or equipment, then
  consult your CASE Dealer in order to make sure that any adaptations
  or modifications made are in keeping with the technical specifications
  of the machine and with prevailing safety requirements.
• Any modification or adaptation which is not approved by the manufacturer
  may invalidate the machine’s initial conformity as regards
  safety requirements.

TABLE OF CONTENTS:

Case 988 & 1188 Industry Wheeled Excavators Operator’s Manual 9-81420 – PDF DOWNLOAD

TO THE OWNER ……………………………………………………………………………….. 5 – 8
988 AND 1188 INDUSTRY SERIES WHEELED HYDRAULIC
EXCAVATOR …………………………………………………………………………………. 5
TO THE OWNER………………………………………………………………………………… 6
RIGHT, LEFT, FRONT AND REAR OF THE MACHINE …………………………… 8
MACHINE IDENTIFICATION NUMBERS/COMPONENTS…………………… 10 – 13
MACHINE, TYPE, VERSION, SERIAL NUMBER AND
YEAR OF BUILD …………………………………………………………………………… 10
MACHINE COMPONENTS…………………………………………………………………. 12
SAFETY/DECALS/HAND SIGNALS…………………………………………………. 14 – 34
SAFETY INSTRUCTIONS………………………………………………………………….. 14
DECALS…………………………………………………………………………………………… 23
HAND SIGNALS ……………………………………………………………………………….. 31
CONTROLS/INSTRUMENTS/ACCESSORIES…………………………………… 36 – 99
CAB DOOR………………………………………………………………………………………. 36
WALKWAY ACCESS GATE……………………………………………………………….. 37
STEPS AND ACCESS HANDLES……………………………………………………….. 38
TILTING THE STEERING COLUMN……………………………………………………. 39
INSTRUMENT PANEL……………………………………………………………………….. 40
CONTROL PANEL…………………………………………………………………………….. 50
CAB CONTROLS………………………………………………………………………………. 52
OPERATOR’S SEAT …………………………………………………………………………. 72
ELECTRICAL CABINET …………………………………………………………………….. 74
WINDSHIELD …………………………………………………………………………………… 75
FRONT LOWER WINDOW…………………………………………………………………. 77
HEATING AND VENTILATION……………………………………………………………. 78
FRONT VIEW MIRROR AND REAR VIEW MIRRORS…………………………… 79
TOWING EYE…………………………………………………………………………………… 80
FUEL TANK ……………………………………………………………………………………… 81
TOOL BOX……………………………………………………………………………………….. 82
TOOLING…………………………………………………………………………………………. 82
STABILIZER AND DOZER BLADE SELECTOR VALVE …………………………. 83
ENGINE HOODS………………………………………………………………………………. 85
ACCESS PANELS…………………………………………………………………………….. 86
RIGHT-HAND SIDE PANEL ……………………………………………………………….. 87
ELECTRICAL POWER POINT ……………………………………………………………. 88
STABILIZER PADS……………………………………………………………………………. 89
HYDRAULIC RESERVOIR SHUT-OFF VALVE …………………………………….. 90
BATTERY MASTER SWITCH …………………………………………………………….. 91
LOAD HANDLING POINT…………………………………………………………………… 91
REFLECTORS………………………………………………………………………………….. 92
BOOM LOCKING VALVE …………………………………………………………………… 93
DIPPER LOCKING VALVE…………………………………………………………………. 93
CONTROL VALVE PARTITION HOOD………………………………………………… 94
ENGINE COMPARTMENT LIGHT ………………………………………………………. 95
WHEEL BLOCKS ……………………………………………………………………………… 95
SAFETY VALVES……………………………………………………………………………… 95
FUEL TANK FILLER PUMP………………………………………………………………… 96
ROTARY LIGHT ……………………………………………………………………………….. 98
OPERATING INSTRUCTIONS……………………………………………………… 100 – 133
BEFORE OPERATING THE MACHINE……………………………………………… 100
MACHINE OPERATION…………………………………………………………………… 101
RUNNING-IN PERIOD …………………………………………………………………….. 103
STARTING THE ENGINE…………………………………………………………………. 104
STARTING THE ENGINE IN COLD WEATHER ………………………………….. 107
STOPPING THE ENGINE ………………………………………………………………… 108
OPERATING THE MACHINE IN COLD WEATHER …………………………….. 109
LOAD HANDLING …………………………………………………………………………… 110
LOAD HANDLING LIMITS………………………………………………………………… 112
OVERLOAD INDICATOR…………………………………………………………………. 113
TRANSPORTING THE MACHINE …………………………………………………….. 114
HANDLING THE MACHINE ……………………………………………………………… 120
CAB REMOVAL AND INSTALLATION……………………………………………….. 123
TOWING THE MACHINE …………………………………………………………………. 126
TOWING THE MACHINE IN AN EMERGENCY ………………………………….. 130
OPERATING IN WATER………………………………………………………………….. 131
INSTALLING THE FUEL TANK CAP …………………………………………………. 132
PARKING THE MACHINE………………………………………………………………… 133
JOB SITE AND ROAD OPERATION …………………………………………….. 134 – 145
OPERATING INSTRUCTIONS………………………………………………………….. 134
ROAD TRAVEL ………………………………………………………………………………. 136
JOB SITE TRAVEL………………………………………………………………………….. 142
LOAD HANDLING …………………………………………………………………………… 144
SERVICING INTERVALS …………………………………………………………….. 146 – 150
SERVICING INSTRUCTIONS…………………………………………………………… 146
HOURMETER…………………………………………………………………………………. 147
INTERVALS……………………………………………………………………………………. 148
LUBRICATION/FILTERS/FLUIDS…………………………………………………. 151 – 206
FLUIDS AND LUBRICANTS……………………………………………………………… 151
ENVIRONMENT ……………………………………………………………………………… 153
PLASTIC AND RESIN PARTS ………………………………………………………….. 154
FLUID AND LUBRICANT CAPACITIES AND SPECIFICATIONS ………….. 154
GREASE POINTS …………………………………………………………………………… 156
LEVELS …………………………………………………………………………………………. 170
ENGINE…………………………………………………………………………………………. 173
COOLING SYSTEM ………………………………………………………………………… 176
FUEL SYSTEM……………………………………………………………………………….. 180
RELEASING PRESSURE IN THE HYDRAULIC SYSTEM ……………………. 183
HYDRAULIC SYSTEM …………………………………………………………………….. 184
AIR FILTER…………………………………………………………………………………….. 193
SWING REDUCTION GEAR …………………………………………………………….. 198
AXLES AND REDUCTION GEARS……………………………………………………. 200
GEARBOX……………………………………………………………………………………… 205
MAINTENANCE/ADJUSTMENTS…………………………………………………. 207 – 241
FUEL TANK FILTER………………………………………………………………………… 207
FRONT AXLE LOCKING CYLINDERS……………………………………………….. 207
WHEELS AND TYRES …………………………………………………………………….. 208
HEATING UNIT FILTER …………………………………………………………………… 211
RADIATOR AND OIL COOLER…………………………………………………………. 212
ENGINE ALTERNATOR AND FAN BELT …………………………………………… 213
ADJUSTING ROCKER ARM CLEARANCE ………………………………………… 215
INSPECTING AND CLEANING THE MACHINE ………………………………….. 218
ACCUMULATORS…………………………………………………………………………… 219
REPLACING A CLAMSHELL ……………………………………………………………. 220
REPLACING A DIPPER …………………………………………………………………… 225
SLEEVES FOR THREADED PINS…………………………………………………….. 229
REPLACING A HOSE………………………………………………………………………. 230
REPLACING STANDARD PINS BY “EXPANDER” PINS ……………………… 231
CHECKING FOR CYLINDER LEAKAGE ……………………………………………. 232
SHIMMING OF ATTACHMENTS……………………………………………………….. 233
AIR CONDITIONING ……………………………………………………………………….. 234
ENGINE TROUBLESHOOTING………………………………………………………… 237
ELECTRICAL SYSTEM……………………………………………………………….. 242 – 259
FUSES AND RELAYS ……………………………………………………………………… 242
BATTERIES……………………………………………………………………………………. 244
CONNECTING BOOSTER BATTERIES …………………………………………….. 247
ALTERNATOR………………………………………………………………………………… 248
STARTER MOTOR………………………………………………………………………….. 248
ELECTRONIC CONTROL BOX…………………………………………………………. 249
TEMPERATURE SENDER……………………………………………………………….. 250
BULBS …………………………………………………………………………………………… 251
REPLACING A BULB ………………………………………………………………………. 252
ADJUSTING THE UPPERSTRUCTURE HEADLIGHTS……………………….. 259
STORAGE………………………………………………………………………………….. 260 – 261
STORING THE MACHINE………………………………………………………………… 260
SPECIFICATIONS ………………………………………………………………………. 262 – 278
ENGINE…………………………………………………………………………………………. 262
HYDRAULIC SYSTEM …………………………………………………………………….. 264
ELECTRICAL SYSTEM……………………………………………………………………. 266
UPPERSTRUCTURE ………………………………………………………………………. 266
CAB ………………………………………………………………………………………………. 266
OPERATION…………………………………………………………………………………… 267
UNDERCARRIAGE …………………………………………………………………………. 267
TYRES…………………………………………………………………………………………… 267
BRAKES ………………………………………………………………………………………… 267
SAFETY DEVICES………………………………………………………………………….. 268
INDICATORS………………………………………………………………………………….. 268
WARNING AND INDICATOR LAMPS………………………………………………… 268
TRAVEL…………………………………………………………………………………………. 269
ATTACHMENTS……………………………………………………………………………… 269
NOISE LEVEL ………………………………………………………………………………… 269
WEIGHTS………………………………………………………………………………………. 270
CLAMSHELLS………………………………………………………………………………… 272
MACHINE OVERALL DIMENSIONS………………………………………………….. 273
WORKING RANGE …………………………………………………………………………. 276
TRANSPORTATION OVERALL DIMENSIONS …………………………………… 278
ALPHABETICAL INDEX ……………………………………………………………… 279 – 282

IMAGES PREVIEW OF THE MANUAL:

CASE 988 & 1188 INDUSTRY WHEELED EXCAVATORS OPERATOR’S MANUAL 9-81420 – PDF DOWNLOAD:

PLEASE NOTE:

• This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
• This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
• Require some other service manual or have any queries: please WRITE to us at [email protected]

S.V