Case Crawler 1450 Service Repair Manual 9-72858R0 – PDF DOWNLOAD

Description

Case Crawler 1450 Service Repair Manual

FILE DETAILS:

Case Crawler 1450 Service Repair Manual 

Size : 139 MB
Format : PDF
Language : English
Number of Pages : 770 pages
Brand: Case
Type of machine: Tractor
Type of document: Service Manual
Model: Case Crawler 1450
Part No: 9-72858R0

TABLE OF CONTENTS:

Case Crawler 1450 Service Repair Manual 

• Table of Contents
• General
• Engine
• Fuel System
• Hydraulics
• Track Suspension
• Power Train
• Brakes
• Electrical System
• Mounted Equipment

CASE CRAWLER 1450 SERVICE REPAIR MANUAL 9-72858R0 – PDF DOWNLOAD:

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Case Crawler 1450 Service Repair Manual 

SAMPLE PAGES FROM THE MANUAL:

RUN-IN INSTRUCTIONS:

Engine Lubrication

• When the engine rebuild is complete, fill the engine crankcase with Case HDM oil and install new engine oil filters. NOTE: If Case HDM oil is not used, use only a Series 3 DS or CD Service Classification oil that has the proper viscosity rating for prevailing air temperature. Refer to vehicle Operators Manual.
• After the first 20 hours of operation, change the engine oil while the engine is hot and replace the the engine oil filter/s. DO NOT DRAIN OIL UNTIL THE ENGINE HAS BEEN OPERATED 20 HOURS. Change the engine oil and filter/s at the recommended intervals thereafter as outlined in the Operator’s Manual.
• Run-In Procedure (Agricultural Tractors):For the first 8 hours of field operation stay one gear lower than normal. For the next 12 hours DO NOT “lug” the engine. Prevent “lugging” by shifting to a lower gear. The engine must not be “lugged” below its Rated Engine RPM during the early hours of life.
• Run-In Procedure (Construction Equipment): For the first 8 hours, operate the engine at full throttle maintaining a normal load. DO NOT baby the engine. but avoid prolonged converter or hydraulic stall. Engine must not be “lugged” below
  Its Rated Engine RPM (Do not exceed 10 seconds of stall).
• Run-In Procedure (Power Units):For the first 1/2 hour. operate engine at 2/3 rated RPM with a light load or no load. For the next (1) hour. run engine at 80 to 90% load at rated RPM (but not over 2000 RPM). Then full load and rated RPM as required in application.

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]