Case CX130 Crawler Excavator Operator’s Manual 6-24343 – PDF DOWNLOAD

Description

Case CX130 Crawler Excavator Operator’s Manual 6-24343 – PDF DOWNLOAD

DESCRIPTION:

Case CX130 Crawler Excavator Operator’s Manual 6-24343 – PDF DOWNLOAD

TO THE OWNER :

• Your machine has been designed and built to the highest standards of
  quality. It conforms to all current safety regulations. See “Official documents”.
• However, the risk of accidents can never be completely
  excluded. That is why it is essential to observe elementary safety rules
  and precautions.
• Read this manual carefully, paying particular attention to the instructions
  concerning safety, operation and maintenance so as to avoid the
  risk of injury while operating or servicing the machine.
• Use this manual as a guide. Your machine will remain a reliable working
  tool provided it is kept in good working condition and serviced properly.
• The standard attachments and equipment available for use with this
  machine are intended for general earthmoving purposes, material
  rehandling, boring, ditch cleaning, etc. If the machine is to be used for
  handling loads, (tubing, concrete pipe sections, shoring material, etc.),
  make sure the machine is suitably equipped for this type of work. For
  this type of application, the machine must be equipped with safety
  valves, an overload indicator, a load handling chart corresponding to
  the type of machine and its attachment and a load fixing point. All legal
  requirements must also be strictly observed.
• Do not use this machine for any application or purpose other than
  those described in this manual. If the machine is to be used for work
  involving the use of special attachments, accessories or equipment,
  consult your CASE Dealer in order to make sure that any adaptations
  or modifications made are in keeping with the machine’s technical
  specifications and with prevailing safety requirements.
• Any modification or adaptation which is not approved by the manufacturer
  may invalidate the machine’s initial conformity with safety requirements.
• The machine must undergo regular inspections, the frequency of which
  varies according to the type of use. Consult your CASE Dealer.

TABLE OF CONTENTS:

Case CX130 Crawler Excavator Operator’s Manual 6-24343 – PDF DOWNLOAD

TO THE OWNER ……………………………………………………………………………….. 5 – 9
CX130 (TYPES LC AND LR) HYDRAULIC CRAWLER EXCAVATOR ……….. 5
TO THE OWNER ………………………………………………………………………………… 6
RIGHT, LEFT, FRONT AND REAR OF THE MACHINE …………………………… 9
IDENTIFICATION NUMBERS/MACHINE COMPONENTS ……………………. 10 – 13
TYPE, SERIAL NUMBER AND YEAR OF MANUFACTURE …………………… 10
MACHINE COMPONENTS …………………………………………………………………. 12
SAFETY/DECALS/HAND SIGNAL ……………………………………………………. 14 – 35
SAFETY INSTRUCTIONS …………………………………………………………………. 14
DECALS …………………………………………………………………………………………… 26
HAND SIGNALS ……………………………………………………………………………….. 32
CONTROLS/INSTRUMENTS/ACCESSORIES ……………………………………. 36 – 83
CAB DOOR ………………………………………………………………………………………. 36
STEPS AND ACCESS HANDLES ……………………………………………………….. 37
OPERATOR’S COMPARTMENT CONTROLS ……………………………………… 38
SYSTEMS DISPLAY AND CONTROL PANEL ………………………………………. 44
HEATING AND VENTILATION CONTROLS …………………………………………. 61
HEATING AND VENTILATION OR AIR CONDITIONING CONTROLS……… 64
OPERATOR’S SEAT …………………………………………………………………………. 68
WINDSHIELD …………………………………………………………………………………… 71
LOWER FRONT WINDOW …………………………………………………………………. 72
REAR WINDOW AND EMERGENCY EXIT ………………………………………….. 73
FUEL TANK ……………………………………………………………………………………… 74
CAB GUARD (F.O.P.S.) …………………………………………………………………….. 74
REAR VIEW MIRRORS ……………………………………………………………………… 75
FRONT STORAGE BOX ……………………………………………………………………. 75
SIDE DOORS …………………………………………………………………………………… 76
ENGINE HOOD ………………………………………………………………………………… 77
LOWER PANELS ………………………………………………………………………………. 78
WINDSHIELD WASHER RESERVOIR ………………………………………………… 78
LOAD HANDLING EYES ……………………………………………………………………. 79
TOWING HOLES ………………………………………………………………………………. 80
ROTATING BEACON CABLE …………………………………………………………….. 80
SAFETY VALVES ……………………………………………………………………………… 81
OPTIONAL TOOL FLOW SELECTOR VALVE ………………………………………. 81
OPTIONAL TOOL SUPPLY VALVES …………………………………………………… 82
FUEL TANK FILLER PUMP ………………………………………………………………… 83
OPERATING INSTRUCTIONS ……………………………………………………….. 84 – 128
BEFORE OPERATING THE MACHINE ……………………………………………….. 84
MACHINE OPERATION …………………………………………………………………….. 85
RUN-IN PERIOD ………………………………………………………………………………. 87
ANTI-THEFT DEVICE ……………………………………………………………………….. 88
STARTING THE ENGINE …………………………………………………………………… 91
BRINGING THE MACHINE UP TO OPERATING TEMPERATURE …………. 93
ENGINE OPERATION ……………………………………………………………………….. 94
OPERATING THE MACHINE IN COLD WEATHER ………………………………. 95
OPERATING THE MACHINE IN HOT WEATHER …………………………………. 95
STOPPING THE ENGINE ………………………………………………………………….. 96
MACHINE OPERATION …………………………………………………………………….. 97
MACHINE TRAVEL …………………………………………………………………………… 99
HANDLING THE MACHINE ……………………………………………………………… 102
LOAD HANDLING …………………………………………………………………………… 102
LOAD HANDLING LIMITS ………………………………………………………………… 104
OPERATING THE MACHINE IN WATER …………………………………………… 105
OPERATING THE MACHINE ON SLOPING GROUND ……………………….. 105
OPERATING THE BACKHOE BUCKET …………………………………………….. 106
QUICK COUPLER INSTALLATION (CX130LC) ………………………………….. 107
QUICK TOOL INSTALLATION AND REMOVAL (CX130LC) …………………. 108
PARKING THE MACHINE ………………………………………………………………… 112
TOWING THE MACHINE …………………………………………………………………. 113
LOWERING THE ATTACHMENT IN THE EVENT
MACHINE FAILURE …………………………………………………………………….. 114
HYDRAULIC BREAKER OR HIGH FLOW HYDRAULIC
CIRCUITS (CX130LC) …………………………………………………………………. 115
OFFSET BACKHOE BOOM OR HIGH FLOW HYDRAULIC
CIRCUITS (CX130LC) …………………………………………………………………. 119
PLACING THE 3.00 M DIPPER IN TRANSPORT
POSITION (CX130LC) …………………………………………………………………. 121
LOCKING THE LONG REACH ATTACHMENT
FOR TRANSPORT (CX130LR) ……………………………………………………… 122
TRANSPORTING THE MACHINE …………………………………………………….. 123
HYDRAULIC BREAKER (CX130LC) ………………………………………………….. 127
SERVICING INTERVALS …………………………………………………………….. 129 – 136
SERVICING INSTRUCTIONS …………………………………………………………… 129
HOURMETER …………………………………………………………………………………. 130
DAILY INSPECTION ……………………………………………………………………….. 130
QUICK COUPLER (CX130LC) ………………………………………………………….. 132
INTERVALS ……………………………………………………………………………………. 133
LUBRICATION/FILTERS/FLUIDS ………………………………………………… 137 – 184
FLUIDS AND LUBRICANTS ……………………………………………………………… 137
ENVIRONMENT ……………………………………………………………………………… 140
FLUID AND LUBRICANT CAPACITIES AND SPECIFICATIONS …………… 141
GREASE POINTS ……………………………………………………………………………. 142
GREASING THE TURNTABLE TEETH ………………………………………………. 152
GREASING THE SWING REDUCTION GEAR ……………………………………. 152
GREASING THE HYDRAULIC BREAKER (CX130LC) …………………………. 153
LEVELS …………………………………………………………………………………………. 154
ENGINE …………………………………………………………………………………………. 156
COOLING SYSTEM …………………………………………………………………………. 159
FUEL SYSTEM ……………………………………………………………………………….. 162
RELEASING PRESSURE IN THE HYDRAULIC SYSTEM ……………………. 165
HYDRAULIC SYSTEM …………………………………………………………………….. 166
AIR FILTER …………………………………………………………………………………….. 178
SWING REDUCTION GEAR …………………………………………………………….. 182
TRAVEL REDUCTION GEARS …………………………………………………………. 184
MAINTENANCE/ADJUSTMENTS …………………………………………………. 185 – 211
TRACKS ………………………………………………………………………………………… 185
TRACK ROLLERS AND IDLER WHEELS …………………………………………… 189
RADIATOR AND OIL COOLER …………………………………………………………. 189
FAN AND ALTERNATOR DRIVE BELT ……………………………………………… 190
ADJUSTMENT OF ENGINE VALVE ROCKER CLEARANCES ……………… 191
FUEL TANK FILTER ………………………………………………………………………… 191
INSPECTING AND CLEANING THE MACHINE ………………………………….. 192
CHECKING FOR CYLINDER LEAKAGE ……………………………………………. 192
PLASTIC AND RESIN PARTS ………………………………………………………….. 192
REPLACING A TOOTH TIP ON A BACKHOE BUCKET ……………………….. 193
TEETH AND TOOTH TIP WEAR LIMITS ……………………………………………. 194
REPLACING A BACKHOE BUCKET ………………………………………………….. 195
HYDRAULIC BREAKER (CX130LC) ………………………………………………….. 197
CHECKING THE QUICK COUPLER LATCHING
HOOK OPENING (CX130LC) ……………………………………………………….. 202
WELDING ON THE MACHINE ………………………………………………………….. 204
FIRE EXTINGUISHER ……………………………………………………………………… 204
AIR CONDITIONING ………………………………………………………………………. 205
ENGINE TROUBLESHOOTING ………………………………………………………… 208
HARDWARE TORQUE INSPECTION ………………………………………………… 210
ELECTRICAL SYSTEM ……………………………………………………………….. 212 – 219
FUSES …………………………………………………………………………………………… 212
BATTERIES ……………………………………………………………………………………. 214
CONNECTING BOOSTER BATTERIES …………………………………………….. 216
ALTERNATOR ………………………………………………………………………………… 217
STARTER MOTOR ………………………………………………………………………….. 217
REPLACING A BULB ………………………………………………………………………. 218
STORAGE …………………………………………………………………………………. 220 – 221
STORING THE MACHINE ………………………………………………………………… 220
SPECIFICATIONS ………………………………………………………………………. 222 – 238
ENGINE …………………………………………………………………………………………. 222
HYDRAULIC SYSTEM …………………………………………………………………….. 222
UNDERCARRIAGE …………………………………………………………………………. 224
SAFETY DEVICES ………………………………………………………………………….. 224
OPERATOR’S COMPARTMENT ………………………………………………………. 224
NOISE LEVELS ………………………………………………………………………………. 224
VIBRATION LEVEL INSIDE THE CAB ……………………………………………….. 225
CAB ………………………………………………………………………………………………. 225
WEIGHTS ………………………………………………………………………………………. 225
MONOBLOC BOOM ………………………………………………………………………… 225
DIPPER …………………………………………………………………………………………. 225
BUCKETS ………………………………………………………………………………………. 226
DOZER BLADE ……………………………………………………………………………….. 226
MACHINE OVERALL DIMENSIONS ………………………………………………….. 227
WORKING RANGE …………………………………………………………………………. 232
HYDRAULIC BREAKER (CX130LC) ………………………………………………….. 236
QUICK COUPLER (CX130LC) ………………………………………………………….. 238
ALPHABETICAL INDEX ……………………………………………………………… 239 – 242

IMAGES PREVIEW OF THE MANUAL:

CASE CX130 CRAWLER EXCAVATOR OPERATOR’S MANUAL 6-24343 – PDF DOWNLOAD:

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.V