Case CX130C Crawler Excavator Service Repair Manual (47795402) Case CX130C – PDF DOWNLOAS

Description

Case CX130C Crawler Excavator Service Repair Manual (47795402) Case CX130C

CASE CX130C CRAWLER EXCAVATOR SERVICE REPAIR MANUAL (47795402) CASE CX130C – PDF DOWNLOAS:

IMAGE PREVIEW:

DESCRIPTION:

Case CX130C Crawler Excavator Service Repair Manual (47795402) Case CX130C

Cleaning
Clean the metal parts with cleaning solution that meets the standard and steam cleaning. (except for bearings)
After cleaning, dry well, and inject oil in all parts.
Also inject oil into the bearings after drying.
Inspection
When disassembling parts, check all the parts.
If there are any worn or damaged parts, replace them.
Inspect carefully to prevent initial breakdowns.
Bearing
Replace any loose bearings.
Air dry bearings before installing them.
Needle bearing
When inserting needle bearings, be very careful not to damage them.
Apply grease to the section where the needle bearing will be inserted.
Gear
Check that there is no wear and no damage.
Oil seal, O-ring, gasket
Always install new oil seals, O-rings, and gaskets.
Apply grease to sections where oil seals and O-rings will be inserted.
Shaft
Check that there is no wear and no damage.
Check the bearings and check for damaged oil seals on the shaft.
Service parts
Install CASE CONSTRUCTION genuine service parts.
When placing an order, check the parts catalog. It contains the CASE CONSTRUCTION genuine part numbers.
Any breakdowns arising from the installation of non-genuine parts are not covered by the warranty.
Lubricants (fuel, hydraulic oil)
Use the oil from the specified company or specified in the operator’s manual or service Manual.
Any breakdowns arising from any fuel or hydraulic oil other than those specified are not covered by the warranty.

TABLE OF CONTENTS:

Case CX130C Crawler Excavator Service Repair Manual (47795402) Case CX130C

INTRODUCTION
Engine 10
[10 001] Engine and crankcase 10 1
[10 102] Pan and covers 10 2
[10 101] Cylinder heads 10 3
[10 103] Crankshaft and flywheel 10 4
[10 216] Fuel tanks 10 5
[10 206] Fuel filters 10 6
[10 218] Fuel injection system 10 7
[10 250] Turbocharger and lines 10 8
[10 254] Intake and exhaust manifolds and muffler 10 9
[10 501] Exhaust Gas Recirculation (EGR) exhaust treatment 10 10
[10 400] Engine cooling system 10 11
[10 414] Fan and drive 10 12
[10 310] Aftercooler 10 13
[10 304] Engine lubrication system 10 14
[10 408] Oil cooler and lines 10 15
Hydraulic systems 35
[35 000] Hydraulic systems 35 1
[35 300] Reservoir, cooler, and filters 35 2
[35 106] Variable displacement pump 35 3
[35 102] Pump control valves 35 4
[35 304] Combination pump units 35 5
[35 359] Main control valve 35 6
[35 357] Pilot system 35 7
[35 525] Auxiliary hydraulic valves and lines 35 8
[35 355] Hydraulic hand control 35 9
[35 356] Hydraulic foot control 35 10
[35 352] Hydraulic swing system 35 11
[35 353] Hydraulic travel system 35 12
[35 354] Hydraulic central joint 35 13
[35 736] Boom hydraulic system 35 14
[35 737] Dipper hydraulic system 35 15
[35 738] Excavator and backhoe bucket hydraulic system 35 16
[35 734] Tool quick coupler hydraulic system 35 17
[35 741] Dozer blade cylinders 35 18
Frames and ballasting 39
[39 140] Ballasts and supports 39 1
Tracks and track suspension 48
[48 130] Track frame and driving wheels 48 1
[48 100] Tracks 48 2
[48 134] Track tension units 48 3
[48 138] Track rollers 48 4
Cab climate control 50
[50 100] Heating 50 1
[50 200] Air conditioning 50 2
Electrical systems 55
[55 000] Electrical system 55 1
[55 100] Harnesses and connectors 55 2
[55 015] Engine control system 55 3
[55 201] Engine starting system 55 4
[55 301] Alternator 55 5
[55 302] Battery 55 6
[55 202] Cold start aid 55 7
[55 010] Fuel injection system 55 8
[55 014] Engine intake and exhaust system 55 9
[55 989] Exhaust Gas Recirculation (EGR) electrical system 55 10
[55 012] Engine cooling system 55 11
[55 013] Engine oil system 55 12
[55 640] Electronic modules 55 13
[55 512] Cab controls 55 14
[55 036] Hydraulic system control 55 15
[55 051] Cab Heating, Ventilation, and Air-Conditioning (HVAC) controls 55 16
[55 050] Heating, Ventilation, and Air-Conditioning (HVAC) control system 55 17
[55 524] Cab controls (Lift arm, Boom, Dipper, Bucket) 55 18
[55 416] Swing control system 55 19
[55 417] Travel control system 55 20
[55 950] Hammer electric system 55 21
[55 530] Camera 55 22
[55 518] Wiper and washer system 55 23
[55 404] External lighting 55 24
[55 514] Cab lighting 55 25
[55 408] Warning indicators, alarms, and instruments 55 26
[55 992] Anti-theft system 55 27
[55 DTC] FAULT CODES 55 28
Booms, dippers, and buckets 84
[84 910] Boom 84 1
[84 912] Dipper arm 84 2
[84 100] Bucket 84 3
Dozer blade and arm 86
[86 110] Dozer blade 86 1
Platform, cab, bodywork, and decals 90
[90 150] Cab 90 1
[90 156] Cab glazing 90 2
[90 120] Mechanically-adjusted operator seat 90 3
[90 100] Engine hood and panels 90 4

PLEASE NOTE:

⦁ This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
⦁ This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
⦁ Require some other service manual or have any queries: please WRITE to us at [email protected]