Case CX17B Mini Excavator Operator’s Manual 87492460 – PDF DOWNLOAD

Description

Case CX17B Mini Excavator Operator’s Manual 87492460 – PDF DOWNLOAD

DESCRIPTION:

Case CX17B Mini Excavator Operator’s Manual 87492460 – PDF DOWNLOAD

GENERAL :

• This manual describes procedures to help the operator gain peak performance through effective, economical
machine operation and maintenance for the Hydraulic Excavators.
• Before operating the machine, operators must thoroughly read and understand all Safety, Operation and Maintenance
instructions found in this manual. Failure to follow the instructions given in this manual, may lead to serious
injuries to persons and or to equipment failure.
• Operators and persons working with this machine should continually study this manual until proper Safety, Operation
and Maintenance procedures are completely understood.
• This manual describes the basic operating instruction and techniques for the machine use. Skill is gained as the
operator utilizes these techniques and perfects them with an actual machine.
• Some illustrated pictures may differ from the real version of your machine. As technical updating and improvement
of products is continuous. The manuals are constantly updated to reflect these changes.
• This manual may contain attachments and optional equipment not available in your area. Please contact an authorized
Dealer for any optional attachments required.
• We expressly stress the fact that this manual is written on the presupposition that only genuine Manufacturer’s
parts are to be used. Not including cases where parts locally procured were used and/or the machine was arbitrarily
modified by the user locally.
• Materials and specifications are subject to change without notice.

TABLE OF CONTENTS:

Case CX17B Mini Excavator Operator’s Manual 87492460 – PDF DOWNLOAD

FOREWORD
GENERAL……………………………………………………………………………………………………………..0-1
PERIODIC INSPECTIONS ………………………………………………………………………………………0-1
NOTE……………………………………………………………………………………………………………………0-1
REMARKS RELEVANT TO ORDERS……………………………………………………………………….0-2
NOISE LEVELS (2000/14/EC)………………………………………………………………………………….0-3
SOUND POWER LEVEL………………………………………………………………………………………0-3
SOUND PRESSURE LEVEL AT THE OPERATOR’S SEAT ……………………………………..0-3
LEVEL OF VIBRATIONS TRANSMITTED TO THE OPERATOR……………………………….0-3
1. SAFETY PRECAUTIONS
1.1 GENERAL SAFETY INFORMATION …………………………………………………………………1-3
1.2 SAFETY PRECAUTIONS…………………………………………………………………………………1-4
1.3 PRE-START INSPECTIONS…………………………………………………………………………….1-6
1.4 SAFETY DURING OPERATION ……………………………………………………………………..1-12
1.5 INSPECTION AND MAINTENANCE SAFETY…………………………………………………..1-23
1.6 PRECAUTIONS DURING BATTERY USE ……………………………………………………….1-31
1.7 WARNING LABELS AND DECALS………………………………………………………………….1-33
1.7.1 NOTICE FOR WARNING LABELS AND DECALS……………………………………….1-33
1.7.2 LOCATION OF WARNING LABELS AND DECALS …………………………………….1-33
1.8 PROHIBITED MACHINE OPERATION…………………………………………………………….1-42
1.9 PRECAUTIONS AT THE END OF DAILY WORK………………………………………………1-45
1.10 TRANSPORTATION ……………………………………………………………………………………..1-46
1.11 TOWING THE MACHINE……………………………………………………………………………….1-48
2. MACHINE FAMILIARIZATION
2.1 MACHINE FAMILIARIZATION ………………………………………………………………………….2-3
2.2 GENERAL MACHINE NOMENCLATURE…………………………………………………………..2-3
2.3 OPERATOR’S CAB NOMENCLATURE……………………………………………………………..2-5
2.4 INSTRUMENTS AND CONTROLS NOMENCLATURE………………………………………..2-6
2.4.1 GAUGE CLUSTER……………………………………………………………………………………2-6
2.4.2 SWITCHES………………………………………………………………………………………………2-9
2.4.3 LEVERS AND PEDALS……………………………………………………………………………2-11
2.4.4 SEAT BELT ……………………………………………………………………………………………2-17
2.4.5 CAB (OPTION) ……………………………………………………………………………………….2-18
2.4.6 GUARD WITH LOCKING DEVICE AND COVERS ………………………………………2-21
2.4.7 ELECTRICAL EQUIPMENT ……………………………………………………………………..2-22
2.4.8 SEAT ADJUSTMENT ………………………………………………………………………………2-23
2.4.9 STORAGE BOX AND OTHERS………………………………………………………………..2-24
INDEX
2
3. BASIC MACHINE OPERATION
3.1 BASIC MACHINE OPERATION………………………………………………………………………..3-3
3.1.1 PRE-START CHECK…………………………………………………………………………………3-3
3.1.2 CHECKS BEFORE ENGINE START-UP……………………………………………………..3-4
3.1.3 CONFIRMATION BEFORE STARTING ENGINE ………………………………………….3-9
3.1.4 ENGINE START……………………………………………………………………………………..3-10
3.1.5 STOPPING MACHINE ENGINE………………………………………………………………..3-14
3.1.6 INSPECTION AFTER STARTING ENGINE………………………………………………..3-14
3.1.7 MACHINE WARM UP………………………………………………………………………………3-17
3.1.8 MACHINE OPERATION…………………………………………………………………………..3-18
3.1.9 PRACTICE TO IMPROVE EFFICIENCY ……………………………………………………3-27
3.1.10 MACHINE PARKING……………………………………………………………………………….3-30
3.1.11 CHECKS AND VERIFICATION AFTER WORK…………………………………………..3-31
3.1.12 PRECAUTIONS AFTER OPERATION……………………………………………………….3-31
3.1.13 AVOID SUDDEN ENGINE STOP………………………………………………………………3-31
3.1.14 MACHINE SECURITY……………………………………………………………………………..3-32
3.1.15 CAUTION WHILE USING RUBBER CRAWLERS ……………………………………….3-33
3.1.16 MACHINE OPERATION WITH ADVERSE WEATHER CONDITIONS……………3-37
3.1.17 REFER TO SECTION III “PRECAUTIONS WHEN STORING THE MACHINE
FOR A LONG PERIOD” …………………………………………………………………………..3-39
4. MAINTENANCE
4.1 GENERAL SAFETY INFORMATION…………………………………………………………………4-3
4.2 GENERAL RULES AND SAFETY PRECAUTIONS……………………………………………..4-4
4.3 LUBRICANT, FUEL AND COOLANT SPECIFICATIONS……………………………………4-10
4.4 MAINTENANCE GENERAL TABLE…………………………………………………………………4-12
4.5 ACCESSORY TOOLS……………………………………………………………………………………4-13
4.6 TORQUE SPECIFICATIONS FOR CAPSCREWS AND NUTS …………………………..4-14
4.7 TORQUE SPECIFICATIONS FOR JOINTS AND HYDRAULIC HOSES……………….4-16
4.8 INSTALLING HYDRAULIC HOSE AND PIPE JOINTS……………………………………….4-17
4.9 RELEASING INTERNAL PRESSURE FROM THE HYDRAULIC SYSTEM…………..4-18
4.10 BLEEDING AIR IN FUEL SYSTEM …………………………………………………………………4-19
4.11 REPLACEMENT OF RUBBER CRAWLER ………………………………………………………4-20
4.11.1 CHECK AND TENSION ADJUSTMENT OF RUBBER CRAWLER ………………..4-20
4.11.2 REMOVAL OF RUBBER CRAWLER…………………………………………………………4-24
4.11.3 INSTALLING RUBBER CRAWLERS …………………………………………………………4-25
4.12 INSPECTION AND MAINTENANCE TABLE …………………………………………………….4-26
4.13 WHEN REQUIRED ………………………………………………………………………………………4-29
4.14 PRE-START (EVERY 8 HOURS) INSPECTION AND MAINTENANCE………………..4-39
INDEX
3
4.15 50-HOUR (WEEKLY) INSPECTION AND MAINTENANCE…………………………………4-42
4.16 250-HOUR (3–MONTH) INSPECTION AND MAINTENANCE …………………………….4-47
4.17 500-HOUR (6-MONTH) INSPECTION AND MAINTENANCE ……………………………..4-54
4.18 1000-HOUR (12-MONTH) INSPECTION AND MAINTENANCE ………………………….4-55
4.19 2000-HOUR INSPECTION AND MAINTENANCE……………………………………………..4-59
4.20 5000-HOUR INSPECTION AND MAINTENANCE……………………………………………..4-68
4.21 INSPECTION AND MAINTENANCE TABLE …………………………………………………….4-70
5. TRANSPORTATION
5.1 TRANSPORTATION PLANS…………………………………………………………………………….5-3
5.2 LIFTING PROCEDURES FOR THE COMPLETE MACHINE ………………………………..5-5
5.3 LOAD SPECIFICATIONS…………………………………………………………………………………5-6
6. SPECIFICATIONS
6.1 GENERAL SPECIFICATIONS ………………………………………………………………………….6-3
6.1.1 MACHINE DIMENSIONS …………………………………………………………………………..6-3
6.1.2 GENERAL SPECIFICATIONS…………………………………………………………………….6-4
6.1.3 CRAWLER TYPE ……………………………………………………………………………………..6-5
6.1.4 BUCKET TYPE…………………………………………………………………………………………6-5
6.1.5 ATTACHMENT WORKING RANGES ………………………………………………………….6-6
6.1.6 MACHINE AND COMPONENTS WEIGHT …………………………………………………..6-8
7. OPTIONAL EQUIPMENT
7.1 OPERATION OF HYDRAULIC BREAKER AND NIBBLER …………………………………..7-3
7.1.1 SELECTION OF HYDRAULIC BREAKER AND NIBBLER ……………………………..7-3
7.1.2 BEFORE OPERATING HYDRAULIC BREAKER AND NIBBLER…………………….7-3
7.1.3 PREVENTION OF HYDRAULIC OIL CONTAMINATION………………………………..7-3
7.1.4 ATTACHMENT OPERATION……………………………………………………………………..7-3
7.1.5 SETTING THE STOP VALVE……………………………………………………………………..7-6
7.2 SAFETY PRECAUTIONS…………………………………………………………………………………7-7
7.3 REGULAR INSPECTION AND MAINTENANCE ……………………………………………….7-11
8. TROUBLESHOOTING
8.1 GENERAL TROUBLESHOOTING …………………………………………………………………….8-3
9. SPECIAL PROCEDURE
9.1 MOVING A MACHINE STOPPED BECAUSE OF SUDDEN FAILURE …………………..9-3

IMAGES PREVIEW OF THE MANUAL:

CASE CX17B MINI EXCAVATOR OPERATOR’S MANUAL 87492460 – PDF DOWNLOAD:

PLEASE NOTE:

• This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
• The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
• Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer

S.V