Case CX17B Mini Excavators Operator’s Manual 84345544 – PDF DOWNLOAD

Description

Case CX17B Mini Excavators Operator’s Manual 84345544 – PDF DOWNLOAD

DESCRIPTION:

Case CX17B Mini Excavators Operator’s Manual 84345544 – PDF DOWNLOAD

• The crawler mini excavators are hydraulic machines. They consist of two main parts: the upper frame and the lower frame. These components are coupled by means of a slewing bearing which enables the upper frame to slew with respect to the lower frame.
• The boom, tanks, radiators, counterweight, diesel engine and all hydraulic components for the operation of the excavator are fastened to the upper frame. The lower frame is equipped with crawlers which can be made of rubber or metal and with a blade for levelling operations.

• The machine has been built in accordance with state-of-the-art standards and the recognized safety rules. The machine must be used in accordance with its designated use, by observing the safety and precautionary rules and by strictly following the operating instructions.
• Any functional disorders, especially those affecting the safety of the machine, should therefore be rectified immediately. The Excavator is intended to be used in digging and loading operation (with bucket), ground levelling (with blade) and use of hydraulic hammer to break concrete or other solid material.

TABLE OF CONTENTS:

Case CX17B Mini Excavators Operator’s Manual 84345544 – PDF DOWNLOAD

FOREWORD
DESIGNATED USE ………………………………………………………………………………………………..0-1
GENERAL……………………………………………………………………………………………………………..0-2
PERIODIC INSPECTIONS ………………………………………………………………………………………0-2
NOTE……………………………………………………………………………………………………………………0-2
REMARKS RELEVANT TO ORDERS……………………………………………………………………….0-3
NOISE LEVELS (2000/14/EC)………………………………………………………………………………….0-4
LEVEL OF VIBRATIONS TRANSMITTED TO THE OPERATOR ………………………………….0-5
OPERATOR PROTECTIVE STRUCTURE…………………………………………………………………0-6
1. SAFETY PRECAUTIONS
1.1 GENERAL SAFETY INFORMATION …………………………………………………………………1-3
1.2 SAFETY PRECAUTIONS…………………………………………………………………………………1-4
1.3 PRE-START INSPECTIONS…………………………………………………………………………….1-6
1.4 SAFETY DURING OPERATION ……………………………………………………………………..1-12
1.5 INSPECTION AND MAINTENANCE SAFETY…………………………………………………..1-23
1.6 PRECAUTIONS DURING BATTERY USE ……………………………………………………….1-31
1.7 WARNING LABELS AND DECALS………………………………………………………………….1-33
1.7.1 NOTICE FOR WARNING LABELS AND DECALS……………………………………….1-33
1.7.2 LOCATION OF WARNING LABELS AND DECALS …………………………………….1-33
1.8 PROHIBITED MACHINE OPERATION…………………………………………………………….1-43
1.9 PRECAUTIONS AT THE END OF DAILY WORK………………………………………………1-46
1.10 TRANSPORTATION ……………………………………………………………………………………..1-47
1.11 TOWING THE MACHINE……………………………………………………………………………….1-49
2. MACHINE FAMILIARIZATION
2.1 MACHINE FAMILIARIZATION ………………………………………………………………………….2-3
2.2 GENERAL MACHINE NOMENCLATURE…………………………………………………………..2-3
2.3 OPERATOR’S CAB NOMENCLATURE……………………………………………………………..2-5
2.4 INSTRUMENTS AND CONTROLS NOMENCLATURE………………………………………..2-6
2.4.1 GAUGE CLUSTER……………………………………………………………………………………2-6
2.4.2 SWITCHES………………………………………………………………………………………………2-9
2.4.3 LEVERS AND PEDALS……………………………………………………………………………2-12
2.4.4 SEAT BELT ……………………………………………………………………………………………2-19
2.4.5 CAB (OPTION) ……………………………………………………………………………………….2-20
2.4.6 GUARD WITH LOCKING DEVICE AND COVERS ………………………………………2-23
2.4.7 ELECTRICAL EQUIPMENT ……………………………………………………………………..2-24
2.4.8 SEAT ADJUSTMENT ………………………………………………………………………………2-25
2.4.9 STORAGE BOX AND OTHERS………………………………………………………………..2-26
INDEX
2
3. BASIC MACHINE OPERATION
3.1 BASIC MACHINE OPERATION………………………………………………………………………..3-3
3.1.1 PRE-START CHECK…………………………………………………………………………………3-3
3.1.2 CHECKS BEFORE ENGINE START-UP ……………………………………………………..3-4
3.1.3 CONFIRMATION BEFORE STARTING ENGINE ………………………………………….3-9
3.1.4 ENGINE START……………………………………………………………………………………..3-10
3.1.5 STOPPING MACHINE ENGINE………………………………………………………………..3-14
3.1.6 INSPECTION AFTER STARTING ENGINE………………………………………………..3-14
3.1.7 MACHINE WARM UP………………………………………………………………………………3-17
3.1.8 MACHINE OPERATION…………………………………………………………………………..3-18
3.1.9 CHANGING MACHINE WIDTH (CRAWLER FRAME WIDTH) ………………………3-26
3.1.10 PRACTICE TO IMPROVE EFFICIENCY ……………………………………………………3-28
3.1.11 MACHINE PARKING……………………………………………………………………………….3-31
3.1.12 CHECKS AND VERIFICATION AFTER WORK…………………………………………..3-32
3.1.13 PRECAUTIONS AFTER OPERATION……………………………………………………….3-32
3.1.14 AVOID SUDDEN ENGINE STOP………………………………………………………………3-32
3.1.15 MACHINE SECURITY……………………………………………………………………………..3-33
3.1.16 CAUTION WHILE USING RUBBER CRAWLERS ……………………………………….3-34
3.1.17 MACHINE OPERATION WITH ADVERSE WEATHER CONDITIONS……………3-38
3.1.18 REFER TO SECTION III “PRECAUTIONS WHEN STORING THE MACHINE FOR
A LONG PERIOD”…………………………………………………………………………………..3-40
4. MAINTENANCE
4.1 GENERAL SAFETY INFORMATION…………………………………………………………………4-3
4.2 GENERAL RULES AND SAFETY PRECAUTIONS……………………………………………..4-4
4.3 LUBRICANT, FUEL AND COOLANT SPECIFICATIONS……………………………………4-10
4.3.1 BIODEGRADABLE HYDRAULIC OIL ………………………………………………………..4-11
4.4 MAINTENANCE GENERAL TABLE…………………………………………………………………4-12
4.5 ACCESSORY TOOLS……………………………………………………………………………………4-13
4.6 TORQUE SPECIFICATIONS FOR CAPSCREWS AND NUTS …………………………..4-14
4.7 TORQUE SPECIFICATIONS FOR JOINTS AND HYDRAULIC HOSES……………….4-16
4.8 INSTALLING HYDRAULIC HOSE AND PIPE JOINTS……………………………………….4-17
4.9 RELEASING INTERNAL PRESSURE FROM THE HYDRAULIC SYSTEM…………..4-18
4.10 BLEEDING AIR IN FUEL SYSTEM …………………………………………………………………4-19
4.11 REPLACEMENT OF RUBBER CRAWLER ………………………………………………………4-20
4.11.1 CHECK AND TENSION ADJUSTMENT OF RUBBER CRAWLER ………………..4-20
4.11.2 REMOVAL OF RUBBER CRAWLER…………………………………………………………4-24
4.11.3 INSTALLING RUBBER CRAWLERS …………………………………………………………4-25
4.12 INSPECTION AND MAINTENANCE TABLE …………………………………………………….4-26
4.13 WHEN REQUIRED ………………………………………………………………………………………4-29
INDEX
3
4.14 PRE-START (EVERY 8 HOURS) INSPECTION AND MAINTENANCE………………..4-39
4.15 50-HOUR (WEEKLY) INSPECTION AND MAINTENANCE…………………………………4-42
4.16 250-HOUR (3–MONTH) INSPECTION AND MAINTENANCE …………………………….4-47
4.17 500-HOUR (6-MONTH) INSPECTION AND MAINTENANCE ……………………………..4-54
4.18 1000-HOUR (12-MONTH) INSPECTION AND MAINTENANCE ………………………….4-55
4.19 2000-HOUR INSPECTION AND MAINTENANCE……………………………………………..4-59
4.20 5000-HOUR INSPECTION AND MAINTENANCE……………………………………………..4-68
4.21 INSPECTION AND MAINTENANCE TABLE …………………………………………………….4-70
5. TRANSPORTATION
5.1 TRANSPORTATION PLANS…………………………………………………………………………….5-3
5.2 LIFTING PROCEDURES FOR THE COMPLETE MACHINE ………………………………..5-5
5.3 LOAD SPECIFICATIONS…………………………………………………………………………………5-6
6. SPECIFICATIONS
6.1 GENERAL SPECIFICATIONS ………………………………………………………………………….6-3
6.1.1 MACHINE DIMENSIONS …………………………………………………………………………..6-3
6.1.2 GENERAL SPECIFICATIONS…………………………………………………………………….6-5
6.1.3 CRAWLER TYPE ……………………………………………………………………………………..6-6
6.1.4 BUCKET TYPE…………………………………………………………………………………………6-6
6.1.5 ATTACHMENT WORKING RANGES ………………………………………………………….6-7
6.1.6 MACHINE AND COMPONENTS WEIGHT …………………………………………………..6-9
7. OPTIONAL EQUIPMENT
7.1 OPERATION OF HYDRAULIC BREAKER AND NIBBLER …………………………………..7-3
7.1.1 SELECTION OF HYDRAULIC BREAKER AND NIBBLER ……………………………..7-3
7.1.2 BEFORE OPERATING HYDRAULIC BREAKER AND NIBBLER…………………….7-3
7.1.3 PREVENTION OF HYDRAULIC OIL CONTAMINATION………………………………..7-3
7.1.4 ATTACHMENT OPERATION……………………………………………………………………..7-3
7.1.5 SETTING SELECTOR VALVE ……………………………………………………………………7-5
7.1.6 SETTING THE STOP VALVE……………………………………………………………………..7-6
7.2 SAFETY PRECAUTIONS…………………………………………………………………………………7-7
7.3 REGULAR INSPECTION AND MAINTENANCE ……………………………………………….7-11
8. TROUBLESHOOTING
8.1 GENERAL TROUBLESHOOTING …………………………………………………………………….8-3
INDEX
4
9. SPECIAL PROCEDURE
9.1 MOVING A MACHINE STOPPED BECAUSE OF SUDDEN FAILURE…………………..9-3

IMAGES PREVIEW OF THE MANUAL:

CASE CX17B MINI EXCAVATORS OPERATOR’S MANUAL 84345544 – PDF DOWNLOAD:

PLEASE NOTE:

• This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
• This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
• Require some other service manual or have any queries: please WRITE to us at [email protected]

S.V