Case CX210B CX230B CX240B Crawler Excavators Operator’s Manual 47462332 – PDF DOWNLOAD

Description

Case CX210B CX230B CX240B Crawler Excavators Operator’s Manual 47462332 – PDF DOWNLOAD

DESCRIPTION:

Case CX210B CX230B CX240B Crawler Excavators Operator’s Manual 47462332 – PDF DOWNLOAD

TO THE OWNER :

Your machine has been designed and built to the highest standards of quality. It conforms to all current safety regulations. See “Official documents”. However, the risk of accidents can never be completely excluded. That is why it is essential to observe elementary safety rules and precautions.

• Read this manual carefully, paying particular attention to the instructions concerning safety, operation and maintenance so as to avoid the risk of injury while operating or servicing the machine. The standard attachments and tools of this machine are designed to carry out all kinds of earthmoving and rehandling operations.
• If you want to use this machine to handle a load (pipes, culverts, formwork, etc.), make sure that it is designed to carry out this kind of work. For this type of application, the machine must be equipped with safety valves, an overload indicator, a load handling chart corresponding to the type of machine and its attachment and a load fixing point.
• All legal requirements must also be strictly observed. Do not use this machine for any application or purpose other than those described in this manual.
• If the machine is to be used for work involving the use of special attachments, accessories or equipment, consult your CASE Dealer in order to make sure that any adaptations or modifications made are in keeping with the machine’s technical specifications and with prevailing safety requirements.
• Any modification or adaptation which is not approved by the manufacturer may invalidate the machine’s initial conformity with safety requirements. The machine must undergo regular inspections, the frequency of which varies according to the type of use. Consult your CASE Dealer.

TABLE OF CONTENTS:

Case CX210B CX230B CX240B Crawler Excavators Operator’s Manual 47462332 – PDF DOWNLOAD

1 – To the Owner
2 – Identification Numbers/Machine Components
3 – Safety/Decals/Hand Signals
4 – Controls/Instruments/Accessories
5 – Operating Instructions
6 – Servicing Intervals
7 – Lubrication/Filters/Fluids
8 – Maintenance/Adjustments
9 – Electrical System
10 – Storage
11 – Specifications
12 – Alphabetical Index

SECTION 1 – TO THE OWNER …………………………………………………………………………………………………… 1-1
CX210B (LC, NLC and LR types), CX230B (NLC type) and CX240B (LC, NLC and LR types)
hydraulic crawler excavators …………………………………………………………………………………………………. 1-1
Official documents …………………………………………………………………………………………………………………… 1-3
Right, left, front and rear of the machine …………………………………………………………………………………….. 1-3
SECTION 2 – IDENTIFICATION NUMBERS/MACHINE COMPONENTS ………………………………………….. 2-1
Type, serial number and year of manufacture of the machine ……………………………………………………….. 2-1
Description of the main components ………………………………………………………………………………………….. 2-4
SECTION 3 – SAFETY/DECALS/HAND SIGNALS ………………………………………………………………………… 3-1
Safety instructions …………………………………………………………………………………………………………………… 3-1
Before using the machine ………………………………………………………………………………………………………… 3-2
Operating the machine …………………………………………………………………………………………………………….. 3-3
Preventing risks caused by vibrations ………………………………………………………………………………………… 3-4
Cab protection R.O.P.S., F.O.P.S. and O.P.G. ……………………………………………………………………………. 3-5
Quick coupler (except CX210B and CX240B LR type) …………………………………………………………………. 3-5
Safety area …………………………………………………………………………………………………………………………….. 3-5
Using an implement other than a bucket (except CX210B and CX240B LR type) …………………………….. 3-5
Implement operation and maintenance ………………………………………………………………………………………. 3-5
Parking the machine ……………………………………………………………………………………………………………….. 3-6
Maintenance and adjustments ………………………………………………………………………………………………….. 3-6
Preventing fires or explosions …………………………………………………………………………………………………… 3-7
Prevention of burns ………………………………………………………………………………………………………………….3-8
Decals …………………………………………………………………………………………………………………………………… 3-9
Hand signals …………………………………………………………………………………………………………………………3-20
SECTION 4 – CONTROLS/INSTRUMENTS/ACCESSORIES ………………………………………………………….. 4-1
Cab door ……………………………………………………………………………………………………………………………….. 4-1
Steps and access handles ……………………………………………………………………………………………………….. 4-2
Position of the operator’s compartment controls and accessories ………………………………………………….. 4-3
Right-hand control arm …………………………………………………………………………………………………………….. 4-4
Front RH console ……………………………………………………………………………………………………………………. 4-6
Left-hand control arm ………………………………………………………………………………………………………………. 4-7
RH console …………………………………………………………………………………………………………………………….. 4-9
Systems display and function control panel ……………………………………………………………………………….4-10
Function and message display screen ………………………………………………………………………………………4-12
Heating and ventilation or air conditioning controls ……………………………………………………………………..4-15
Function cancellation lever and safety bar …………………………………………………………………………………4-19
Dipper and upperstructure swing left-hand control lever ………………………………………………………………4-20
Boom and bucket right-hand control lever …………………………………………………………………………………4-20
Travel control levers and pedals ………………………………………………………………………………………………4-21
Option pedal (except CX210B et CX240B LR type) …………………………………………………………………….4-21
Articulated boom adjustment pedal (CX210B and CX230B) …………………………………………………………4-21
TABLE OF CONTENTS
Controls/Instruments/Accessories (continued)
Offset-backhoe boom or high flow hydraulic circuit control pedal
(except CX210B and CX240B LR type) …………………………………………………………………………………4-22
Low flow hydraulic circuit control pedal (except CX210B and CX240B LR type) ……………………………..4-22
Adjustment and locking the option pedals (except CX210B and CX240B LR type) ………………………….4-23
Footrest ………………………………………………………………………………………………………………………………..4-24
Cab light ……………………………………………………………………………………………………………………………….4-24
Coat hanger hook …………………………………………………………………………………………………………………..4-24
Fuse box ……………………………………………………………………………………………………………………………….4-25
Quick coupler locking and unlocking control switch (except CX210B and CX240B LR type) …………….4-25
Roof Curtain ………………………………………………………………………………………………………………………….4-26
Roof hatch …………………………………………………………………………………………………………………………….4-26
Cab door sliding windows ………………………………………………………………………………………………………..4-26
Sun shield ……………………………………………………………………………………………………………………………..4-26
Magazine rack ……………………………………………………………………………………………………………………….4-27
Refrigerated compartment ……………………………………………………………………………………………………….4-27
Storage compartment ……………………………………………………………………………………………………………..4-27
Cup holder …………………………………………………………………………………………………………………………….4-28
Operator’s seat ………………………………………………………………………………………………………………………4-29
Windshield …………………………………………………………………………………………………………………………….4-33
Lower front window …………………………………………………………………………………………………………………4-34
Rear window (emergency exit) …………………………………………………………………………………………………4-34
Fuel tank ……………………………………………………………………………………………………………………………….4-35
Rear view mirrors …………………………………………………………………………………………………………………..4-36
Front storage box …………………………………………………………………………………………………………………..4-36
Side doors …………………………………………………………………………………………………………………………….4-37
Battery master switch ………………………………………………………………………………………………………………4-38
Engine hood ………………………………………………………………………………………………………………………….4-39
Lower panels …………………………………………………………………………………………………………………………4-40
Windshield washer reservoir ……………………………………………………………………………………………………4-40
Rotary light cable ……………………………………………………………………………………………………………………4-40
Load handling eyes ………………………………………………………………………………………………………………..4-41
Towing holes …………………………………………………………………………………………………………………………4-42
Cab protection (R.O.P.S. and F.O.P.S.) …………………………………………………………………………………….4-42
Safety valves …………………………………………………………………………………………………………………………4-43
Optional tool supply valves (except CX210B and CX240B LR type) ………………………………………………4-43
Fuel tank filling pump ………………………………………………………………………………………………………………4-44
SECTION 5 – OPERATING INSTRUCTIONS ………………………………………………………………………………… 5-1
Before using the machine ………………………………………………………………………………………………………….5-1
Operating the machine ……………………………………………………………………………………………………………..5-2
Run-in period …………………………………………………………………………………………………………………………..5-3
TABLE OF CONTENTS
Operating instructions (continued)
Anti-theft device ……………………………………………………………………………………………………………………… 5-4
Starting the engine ………………………………………………………………………………………………………………….. 5-7
Bringing the machine up to operating temperature ………………………………………………………………………. 5-9
Engine operation ……………………………………………………………………………………………………………………5-10
Stopping the engine ……………………………………………………………………………………………………………….5-11
Operating the machine in cold weather ……………………………………………………………………………………..5-12
Operating the machine in hot weather ………………………………………………………………………………………5-12
Machine operation …………………………………………………………………………………………………………………. 5-13
Machine travel ……………………………………………………………………………………………………………………….5-14
Handling the machine …………………………………………………………………………………………………………….5-17
Load handling ………………………………………………………………………………………………………………………..5-18
Operating the machine in water ……………………………………………………………………………………………….5-20
Operating the machine on sloping ground …………………………………………………………………………………5-21
Operating the backhoe bucket …………………………………………………………………………………………………5-22
Quick coupler installation (except CX210B and CX240B LR type) ………………………………………………..5-23
Quick tool installation and removal (except CX210B and CX240B LR type) …………………………………..5-23
Parking the machine ………………………………………………………………………………………………………………5-28
Towing ………………………………………………………………………………………………………………………………….5-30
Lowering the attachment in the event of a machine failure …………………………………………………………..5-32
Auxiliary hydraulic circuits (except CX210B and CX240B LR type) ……………………………………………….5-33
Locking the long reach attachment for transport (CX210B and CX240B LR type) …………………………..5-40
Removal and installation of heavy equipment items ……………………………………………………………………5-40
Transporting the machine ……………………………………………………………………………………………………….5-41
SECTION 6 – SERVICING INTERVALS ……………………………………………………………………………………….. 6-1
Servicing instructions ………………………………………………………………………………………………………………. 6-1
Hourmeter ……………………………………………………………………………………………………………………………… 6-2
Daily inspections …………………………………………………………………………………………………………………….. 6-2
Quick coupler servicing instructions (except CX210B and CX240B LR type) …………………………………… 6-4
Quick coupler incorrect functioning (except CX210B and CX240B LR type) ……………………………………. 6-4
Intervals …………………………………………………………………………………………………………………………………. 6-5
SECTION 7 – LUBRICATION/FILTERS/FLUIDS ……………………………………………………………………………. 7-1
Fluids and lubricants ……………………………………………………………………………………………………………….. 7-1
Environment …………………………………………………………………………………………………………………………… 7-4
Fluid and lubricant capacities and specifications …………………………………………………………………………. 7-4
Grease points …………………………………………………………………………………………………………………………. 7-5
Levels …………………………………………………………………………………………………………………………………..7-22
Engine ………………………………………………………………………………………………………………………………….7-24
Cooling system ………………………………………………………………………………………………………………………7-27
Fuel system …………………………………………………………………………………………………………………………..7-30
Releasing pressure in the hydraulic system ……………………………………………………………………………….7-36
TABLE OF CONTENTS
Lubrication/Filters/Fluids (continued)
Hydraulic system ……………………………………………………………………………………………………………………7-38
Air filter …………………………………………………………………………………………………………………………………7-47
Swing reduction gear ………………………………………………………………………………………………………………7-51
Travel reduction gears …………………………………………………………………………………………………………….7-53
SECTION 8 – MAINTENANCE/ADJUSTMENTS ……………………………………………………………………………. 8-1
Tracks …………………………………………………………………………………………………………………………………….8-1
Track rollers and idler wheels …………………………………………………………………………………………………….8-4
Radiators and oil coolers …………………………………………………………………………………………………………..8-5
Fan and alternator drive belt ………………………………………………………………………………………………………8-6
Adjustment of engine valve rocker clearances ……………………………………………………………………………..8-7
Fuel tank filter ………………………………………………………………………………………………………………………….8-7
Cab protection (F.O.P.S.) ………………………………………………………………………………………………………….8-8
Fire extinguisher ………………………………………………………………………………………………………………………8-8
Welding on the machine ……………………………………………………………………………………………………………8-9
Inspecting and cleaning the machine ………………………………………………………………………………………….8-9
Checking the machine settings …………………………………………………………………………………………………..8-9
Checking for cylinder leakage ………………………………………………………………………………………………….8-10
Plastic and resin parts …………………………………………………………………………………………………………….8-10
Tooth tip wear limits on the backhoe bucket ………………………………………………………………………………8-11
Replacing a tooth tip on a backhoe bucket …………………………………………………………………………………8-12
Replacing a backhoe bucket ……………………………………………………………………………………………………8-13
Shimming the backhoe bucket …………………………………………………………………………………………………8-14
Checking the quick coupler latching hook opening (except CX210B and CX240B LR type) ……………..8-15
Air conditioning ………………………………………………………………………………………………………………………8-17
Engine troubleshooting ……………………………………………………………………………………………………………8-21
Hardware torque inspection ……………………………………………………………………………………………………..8-23
SECTION 9 – ELECTRICAL SYSTEM ………………………………………………………………………………………….. 9-1
Fuses ……………………………………………………………………………………………………………………………………..9-1
Batteries …………………………………………………………………………………………………………………………………9-3
Alternator ………………………………………………………………………………………………………………………………..9-7
Starter motor ……………………………………………………………………………………………………………………………9-7
Replacing a bulb ………………………………………………………………………………………………………………………9-8
SECTION 10 – STORAGE …………………………………………………………………………………………………………. 10-1
Storing the machine ………………………………………………………………………………………………………………..10-1
SECTION 11 – SPECIFICATIONS ………………………………………………………………………………………………. 11-1
Engine ………………………………………………………………………………………………………………………………….11-1
Hydraulic system ……………………………………………………………………………………………………………………11-2
Undercarriage ………………………………………………………………………………………………………………………..11-3
Safety devices ……………………………………………………………………………………………………………………….11-4
TABLE OF CONTENTS
Specifications (continued)
Operator’s compartment …………………………………………………………………………………………………………11-4
Noise levels …………………………………………………………………………………………………………………………..11-4
Vibration level inside the cab …………………………………………………………………………………………………..11-5
Cab ………………………………………………………………………………………………………………………………………11-5
Weights ………………………………………………………………………………………………………………………………..11-6
Booms and dippers ………………………………………………………………………………………………………………..11-6
Backhoe buckets ……………………………………………………………………………………………………………………11-7
Machine overall dimensions …………………………………………………………………………………………………….11-8
Working range …………………………………………………………………………………………………………………….. 11-15
Quick coupler (except CX210B and CX240B LR type) ……………………………………………………………… 11-24
SECTION 12 – ALPHABETICAL INDEX …………………………………………………………………………………….. 12-1

IMAGES PREVIEW OF THE MANUAL:

Customer Support: [email protected]

PLEASE NOTE:

• This is the SAME MANUAL used by the dealerships to diagnose your vehicle
• No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
• Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
• So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com

S.V