Case Excavator CK36-CK50 Service Manual 7-56381 – PDF DOWNLOAD

Description

Case Excavator CK36-CK50 Service Manual

FILE DETAILS:

Case Excavator CK36-CK50 Service Manual 

Size : 16.4 MB
Format : PDF
Language : English
Number of Pages : 260 pages
Brand: Case
Type of machine: Excavator
Type of document: Service Manual
Model: Case Excavator CK36-CK50
Part No: 7-56381

CASE EXCAVATOR CK36-CK50 SERVICE MANUAL 7-56381 – PDF DOWNLOAD:

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Case Excavator CK36-CK50 Service Manual 

GENERAL INFORMATION:

• Cleaning:Clean all metal parts except bearings. In a suitable cleaning solvent or by steam cleaning. Do not use caustic scda for steam cleaning. After cleaning, dry and put oil on all parts. Clean oil passages with compressed air. Clean bearings in a suitable cleaning solvent, try the bearings completely and put oil on the bearings.
• Inspection:Check all parts when the parts are disassembled. Replace all parts that have wear or damage. Small scoring or grooves can be removed with a hone or crocus cloth. Complete a visual inspection for indications of wear. pitting and the replacement of parts necessary to prevent early failures. Bearings Check bearings for easy action. If bearings have a loose fit or rough action replace the bearing. Wash bearings with a suitable cleaning solvent and permit to air dy. DO NOT DRY BEARINGS WITH COMPRESSED AIR.
• Needle Bearings:Before you press needle bearings in a bore always remove any metal protrusions in the bore or edge of the bore. Before you press bearings Into position put petroleum jelly on the inside and outside cfiameter of the bearings.
• Gears:Check all gears for wear and damage. Replace gears that have wear or damage.
• Oil Seals, O-rings and Gaskets:Always install new oil seals. O-rings and gaskets. Put petroleum jelly on seals and O-rings.
• Shafts:Check all shafts that have wear or damage. Check the bearing and oil seal surfaces of the shafts for damage.
• Service Parts:Always install genuine Case service parts. When ordering refer to the Parts Catalog torthe correct part number of the genuine Case replacement items. Failures due to the use of other than genuine Link- Belt replacement parts are not covered by warranty.
• Lubrication:Only use the oils and lubricants specified in the Operator’s or Service Manuals. Failures due to the use of non-specified oils and lubricants are not covered by warranty.

TABLE OF CONTENTS:

Case Excavator CK36-CK50 Service Manual 

• GENERAL
• Safety, General Information and Torque Specifications
• General specifications
• ENGINE
• Engine Removal and Installation
• Engine Disassembly/Assembly/Lubrication System,
• Cooling System and Fuel System
• ELECTRICAL
• Electrical Troubleshooting and Schematics
• Alternator
• Starter Motor
• UNDERCARRIAGE
• Tracks, Rollers and Idlers
• POWER TRAIN
• Travel Motor and Reduction
• Swing Reduction Gear
• UNDERCARRIAGE HYDRAULICS
• Hydraulic Swivel
• UPPER STRUCTURE HYDRAULICS
• Pressure setting, Troubleshooting. Hydraulic Schematics
• Hydraulic Reservoir
• Hydraulic Pilot Pump
• Attachment Valve
• Swing and offset cylinder flow selector valve
• Pressure Limiter and Flow Cut-Off Valve
• Swing Motor
• Hand Control Valve
• Attachment cylinders
• UPPER STRUCTURE ATTACHMENTS
• Upper structure and Turntable Bearing
• Boom. Dipper, Bucket and Dozer Blade
• Pedals and Levers
• Operator’s Cab and Canopy

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted