Case IH PUMA 125 140 155 Multicontroller Tractors Operators Manual – PDF DOWNLOAD

Description

Case IH PUMA 125 140 155 Multicontroller Tractors Operators Manual

DESCRIPTION:

• This Manual has been prepared to assist you in the correct procedure for running-in, driving and operating your new tractor and how to maintain it. Read this Manual carefully. Your tractor is intended for use in normal and customary agricultural applications. If at any time you require advice concerning your tractor, do not hesitate to contact your authorised dealer.
• The dealer has factory trained personnel, genuine manufacturers’ parts and the necessary equipment to carry out all your service requirements.
• Your tractor has been designed and built to give maximum performance, economy and ease of operation under a wide variety of operating conditions.
• Prior to delivery, the tractor was carefully inspected, both at the factory and by your dealer to ensure that it reaches you in optimum condition. To maintain this condition and ensure trouble-free operation, it is important that the routine services, as specified in Section 4 of this Manual, are carried out at the recommended intervals.

IMAGES:

CASE IH PUMA 125 140 155 MULTICONTROLLER TRACTORS OPERATORS MANUAL – PDF DOWNLOAD:

TABLE OF CONTENTS:

SECTION 1
GENERAL INFORMATION AND SAFETY
TO THE OWNER 1-1
PRODUCT IDENTIFICATION 1-3
ECOLOGY AND THE ENVIRONMENT 1-7
SAFETY INFORMATION 1-8
SAFETY DECALS 1-16
INTERNATIONAL SYMBOLS 1-21
AIRBORNE NOISE EMISSION 1-22
SECTION 2
LAYOUT AND FUNCTION OF THE CONTROLS AND INSTRUMENTS
SWITCH panels 2-4
CAB 2-6
ELECTRICAL POWER PANEL 2-22
AIR SUSPENSION SEAT 2-25
PARKING BRAKE, THROTTLE AND FOOT PEDALS 2-30
CONTROL ELEMENTS ON THE STEERING COLUMN 2-32
INTEGRATED CONTROL UNIT (ICU) 2-35
POWERSHIFT TRANSMISSION SYSTEM 2-75
DIFFERENTIAL LOCK 2-100
FOUR WHEEL DRIVE 2-102
FRONT AXLE SUSPENSION (where fitted) 2-104
SECTION 3
WORKING WITH THE TRACTOR
IMPORTANT NOTES 3-2
CONNECTING JUMP LEADS TO THE BATTERY 3-4
STARTING THE ENGINE 3-5
STOPPING THE ENGINE 3-8
POWER MANAGEMENT (PM) 3-10
CONSTANT ENGINE SPEED 3-11
HEADLAND MANAGEMENT CONTROL (HMC) 3-13
TURN ASSIST (WHERE FITTED) 3-24
REAR PTO 3-26
FRONT PTO AND THREE-POINT HITCH (where fitted) 3-40
ELECTRONIC DRAFT CONTROL (EDC) 3-56
ELECTRO HYDRAULIC REMOTES 3-68
THREE-POINT HITCH 3-87
QUICK HITCH 3-93
LINKAGE STABILISERS 3-95
DRAWBARS AND TOWING ATTACHMENTS 3-100
TRAILER BRAKING SYSTEMS (where fitted) 3-114
WHEEL TRACKS 3-121
BALLASTING AND TYRES 3-137
TABLE OF CONTENTS
SECTION 4
LUBRICATION AND MAINTENANCE
GENERAL NOTES 4-1
PROTECTIVE GUARDS 4-6
LUBRICANTS AND COOLANTS 4-9
LUBRICATION AND MAINTENANCE TABLE 4-11
WHEN THE WARNING SYMBOL APPEARS 4-13
EVERY 10 HOURS OF OPERATION OR DAILY 4-16
EVERY 50 OPERATING HOURS 4-19
EVERY 100 OPERATING HOURS 4-29
EVERY 300 OPERATING HOURS 4-30
EVERY 600 OPERATING HOURS 4-33
EVERY 1200 OPERATING HOURS OR 12 MONTHS 4-40
EVERY 1200 OPERATING HOURS OR 2 YEARS 4-48
EVERY 3 YEARS 4-55
GENERAL MAINTENANCE 4-56
FUSES AND RELAYS 4-68
PROTECTION FOR ELECTRONIC AND ELECTRICAL SYSTEMS WHEN CHARGING
THE BATTERY OR DURING WELDING WORK 4-74
STORING THE TRACTOR 4-75
SECTION 5
FAULT FINDING
INTRODUCTION 5-1
ENGINE 5-4
TRANSMISSION 5-7
HYDRAULICS 5-8
THREE-POINT HITCH 5-9
BRAKES 5-10
CAB 5-10
ELECTRICAL SYSTEM 5-11
SECTION 6
ACCESSORIES
AFS 200 MONITOR (where fitted) 6-2
COOLANT IMMERSION HEATER 6-3
TRANSMISSION OIL HEATER 6-3
ROTATING BEACON 6-4
AUXILIARY HEADLIGHTS 6-4
ADDITIONAL 40 AMP SOCKET 6-5
BATTERY ISOLATOR SWITCH 6-6
DYNAMIC FRONT FENDERS 6-7
SECTION 7
SPECIFICATIONS
GENERAL DIMENSIONS ALL MODELS 7-2
VEHICLE WEIGHTS 7-5
CAPACITIES 7-6
ENGINE 7-7
FUEL SYSTEM 7-7
COOLING SYSTEM 7-8
TRANSMISSION 7-8
MAXIMUM OPERATING ANGLE 7-9
REAR POWER TAKE OFF 7-9
FRONT POWER TAKE OFF 7-9
HYDRAULIC SYSTEM 7-10
REMOTE CONTROL VALVES 7-13
FRONT 3-POINT HITCH 7-13
BRAKES 7-14
STEERING 7-14
ELECTRICAL EQUIPMENT 7-15
MINIMUM HARDWARE TIGHTENING TORQUES 7-16
MINIMUM HARDWARE TIGHTENING TORQUES 7-17
SECTION 8
FIRST SERVICE SHEETS
SECTION 9
INDEX

FILE DETAILS:

Size : 12.3 MB
Format : PDF
Language : English
Number of Pages : 398 pages
Brand: Case IH
Type of machine: Tractor
Type of document: Operator’s Manual
Model: PUMA 125,140,155
Part No: 87717969

PLEASE NOTE:

⦁ This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
⦁ The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
⦁ Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer