Case L Series 580 & 590 Loader Backhoe Operator’s Manual 9-27813 – PDF DOWNLOAD

Description

Case L Series 580 & 590 Loader Backhoe Operator’s Manual 9-27813 – PDF DOWNLOAD

DESCRIPTION:

Case L Series 580 & 590 Loader Backhoe Operator’s Manual 9-27813 – PDF DOWNLOAD

TO THE OWNER :

You are the owner of a machine that has been designed and built with quality constantly in mind. It conforms to current labour safety regulations and all national highway and road regulations. See “Official documents” on next page. However, this does not exclude all risk of accident; that is why it is essential to observe elementary safety rules and precautions.

• Read this manual carefully before operating the machine. Instructions concerning safety, operation and maintenance have been developed to permit safe service and operation of this machine. Use this manual as a guide. Your machine is a working tool which you will always be able to count on, as long as it is correctly maintained.
• The standard attachments and equipment of this machine are intended for general earthmoving purposes and re-handling. If the machine is to be used for lifting loads (tubing, concrete pipe sections, shoring material, etc.) then make sure the machine is suitably equipped for this type of work.
• If this is the case, it is mandatory for the machine to be fitted with safety valves, an overload indicator, a load lifting chart corresponding to the type of machine and its attachment and a load fixing point. At the same time, you must also strictly observe current regulations.
• Do not use this machine for any applications or purposes other than those described in this manual. If you use this machine for duties involving the use of attachments, accessories, or special tools, consult your CASE Dealer to make sure that the adaptations or modifications carried out are in conformity with the machine’s technical specifications and with current regulations on safety.
• Any modifications or adaptations which are not approved by the manufacturer may invalidate the machine’s original conformity with safety requirements. For certain applications, the machine must undergo regular inspection. Consult your CASE Dealer.

TABLE OF CONTENTS:

Case L Series 580 & 590 Loader Backhoe Operator’s Manual 9-27813 – PDF DOWNLOAD

TO THE OWNER ………………………………………………………………………………. 7 – 13
580LE, 580SLE, 580LSP, 580LXT, 580LPS, 590SLE AND 590LSP LOADER
BACKHOES ……………………………………………………………………………………. 7
TO THE OWNER ………………………………………………………………………………… 8
PRESENTATION ………………………………………………………………………………. 11
RIGHT, LEFT, FRONT, AND REAR OF THE MACHINE
(except 580LXT type) …………………………………………………………………….. 12
RIGHT, LEFT, FRONT, AND REAR OF THE MACHINE
(580LXT type) ……………………………………………………………………………….. 13
IDENTIFICATION NUMBERS/MACHINE COMPONENTS ……………………. 14 – 23
TYPE, SERIAL NUMBER AND YEAR OF MANUFACTURE
OF THE MACHINE ………………………………………………………………………… 14
IDENTIFICATION OF MAIN COMPONENTS ………………………………………… 18
SAFETY/DECALS/HAND SIGNALS ………………………………………………….. 24 – 61
SAFETY INSTRUCTIONS ………………………………………………………………… 24
DECALS …………………………………………………………………………………………… 38
HAND SIGNALS ……………………………………………………………………………….. 56
CONTROLS/INSTRUMENTS/ACCESSORIES …………………………………. 62 – 143
CAB DOORS ……………………………………………………………………………………. 62
STEPS AND ACCESS HANDLES ……………………………………………………….. 63
INSTRUMENT PANEL ……………………………………………………………………….. 64
OPERATOR’S COMPARTMENT CONTROLS ……………………………………… 68
OPERATOR’S SEAT …………………………………………………………………………. 88
LOADER ATTACHMENT CONTROLS (except 580LSP and 590LSP types) 90
SAFETY VALVES ……………………………………………………………………………… 96
BACKHOE ATTACHMENT CONTROLS
(580LE, 580SLE, 580LPS and 590SLE types) …………………………………… 97
STABILIZER CONTROLS (580LE, 580SLE, 580LPS and 590SLE types) .. 104
LOADER ATTACHMENT, BACKHOE ATTACHMENT
AND STABILIZER CONTROLS (580LSP and 590LSP types only) …….. 106
THREE POINT HITCH ATTACHMENT CONTROL (580LXT type only) …… 124
HEATING, VENTILATION AND AIR CONDITIONING CONTROLS ………… 125
OPERATOR’S COMPARTMENT WINDOWS ……………………………………… 128
REAR VIEW MIRRORS ……………………………………………………………………. 129
FRONT AND REAR WINDSHIELD WASHER RESERVOIR …………………. 130
FUEL TANK ……………………………………………………………………………………. 130
HYDRAULIC RESERVOIR ……………………………………………………………….. 131
TOWING RING ……………………………………………………………………………….. 131
BATTERY MASTER SWITCH …………………………………………………………… 132
BATTERY BOX ……………………………………………………………………………….. 132
LOADER ATTACHMENT SAFETY STRUT …………………………………………. 133
ENGINE HOOD ………………………………………………………………………………. 134
HEATER CONTROL VALVE …………………………………………………………….. 135
RADIATOR DRAIN VALVE ……………………………………………………………….. 135
RIDE CONTROL SYSTEM ……………………………………………………………….. 136
Controls/Instruments/Accessories (continued)
REAR LIGHT BRACKETS (axial backhoe version) (except 580LXT type) . 137
REAR LIGHT BRACKETS (sideshift backhoe version)
(except 580LXT type) …………………………………………………………………… 138
ROTARY LIGHT ………………………………………………………………………………. 139
WHEEL CHOCKS ……………………………………………………………………………. 139
WARNING TRIANGLE …………………………………………………………………….. 140
BACKHOE ATTACHMENT AUXILIARY HYDRAULIC TOOL CONTROLS
(580LE, 580SLE, 580LPS and 590SLE types) …………………………………. 140
HAND-HELD AUXILIARY HYDRAULIC TOOL CONTROLS ………………….. 142
OPERATING INSTRUCTIONS ……………………………………………………… 144 – 200
BEFORE OPERATING THE MACHINE ……………………………………………… 144
OPERATING THE MACHINE ……………………………………………………………. 145
RUNNING-IN PERIOD …………………………………………………………………….. 147
STARTING THE ENGINE …………………………………………………………………. 148
STARTING THE ENGINE IN COLD WEATHER ………………………………….. 151
STOPPING THE ENGINE ………………………………………………………………… 152
OPERATING THE MACHINE IN COLD WEATHER …………………………….. 153
OPERATING THE MACHINE IN HOT WEATHER ……………………………….. 153
SETTING THE MACHINE IN THE BACKHOE ATTACHMENT
WORKING POSITION (except 580LXT type) ………………………………….. 154
BACKHOE ATTACHMENT SIDESHIFT (Offset backhoe version)
(except 580LXT type) …………………………………………………………………… 158
SETTING THE BACKHOE ATTACHMENT
IN THE ROAD TRAVEL POSITION (except 580LXT type) ………………… 160
REPLACING A STABILIZER PAD ……………………………………………………… 163
REPLACING A BACKHOE OR LOADER BUCKET TOOTH TIP ……………. 164
REPLACING A BACKHOE BUCKET (580LE type) ………………………………. 166
REPLACING A BACKHOE BUCKET
(580SLE, 580LSP, 580LPS and 590 types) ……………………………………… 168
DIFFERENTIAL LOCK …………………………………………………………………….. 170
LOADER BUCKET MOUNTED FORKS ……………………………………………… 172
THREE POINT HITCH (580LXT type only) …………………………………………. 175
BACKHOE ATTACHMENT AUXILIARY HYDRAULIC TOOLS
(580LE, 580SLE, 580LPS and 590SLE types) …………………………………. 176
HAND-HELD AUXILIARY HYDRAULIC TOOLS ………………………………….. 179
LOAD HANDLING …………………………………………………………………………… 181
LOAD LIFTING (EXCEPT 580LXT TYPE) ………………………………………….. 182
POWERSHIFT CONTROLLER (580LPS and 590 types) ………………………. 184
MAXIMUM WORKING LOADS WITH BACKHOE ATTACHMENT
(except 580LXT type) …………………………………………………………………… 187
MAXIMUM WORKING LOADS WITH PALLET FORKS
ON LOADER BUCKET …………………………………………………………………. 188
TRANSPORTING THE MACHINE …………………………………………………….. 189
LIFTING THE MACHINE ………………………………………………………………….. 193
Operating instructions (continued)
MOVING THE MACHINE IN THE EVENT
OF LOADER ATTACHMENT CONTROL FAILURE
(580LSP and 590LSP types) …………………………………………………………. 194
MOVING THE MACHINE IN THE EVENT OF DIRECTION
OF TRAVEL CONTROL LEVER FAILURE ……………………………………… 195
TOWING THE MACHINE …………………………………………………………………. 196
OPERATING THE MACHINE IN WATER …………………………………………… 196
PARKING THE MACHINE ………………………………………………………………… 197
HANDLING THE HYDRAULIC BREAKER ………………………………………….. 198
BREAKING TECHNIQUES ON A HYDRAULIC BREAKER …………………… 198
CHOICE OF TOOLS ON A HYDRAULIC BREAKER ……………………………. 199
SPECIAL CONDITIONS OF USE ON A HYDRAULIC BREAKER ………….. 200
JOB SITE AND ROAD INSTRUCTIONS ……………………………………….. 201 – 221
INSTRUCTIONS FOR USE ………………………………………………………………. 201
ROAD TRAVEL ……………………………………………………………………………….. 202
JOB SITE TRAVEL ………………………………………………………………………….. 209
LOADER ATTACHMENT OPERATING INSTRUCTIONS …………………….. 212
BACKHOE ATTACHMENT OPERATING INSTRUCTIONS
(except 580LXT type) …………………………………………………………………… 218
SERVICING INTERVALS …………………………………………………………….. 222 – 227
SERVICING INSTRUCTIONS …………………………………………………………… 222
HOURMETER …………………………………………………………………………………. 223
INTERVALS ……………………………………………………………………………………. 224
HYDRAULIC BREAKER INTERVALS ………………………………………………… 227
LUBRICATION/FILTERS/FLUIDS ………………………………………………… 228 – 313
FLUIDS AND LUBRICANTS ……………………………………………………………… 228
ENVIRONMENT ……………………………………………………………………………… 230
PLASTIC AND RESIN PARTS ………………………………………………………….. 231
FLUID AND LUBRICANT CAPACITIES AND SPECIFICATIONS …………… 231
GREASE POINTS ……………………………………………………………………………. 234
GREASING THE HYDRAULIC BREAKER ………………………………………….. 258
LEVELS …………………………………………………………………………………………. 260
ENGINE …………………………………………………………………………………………. 264
COOLING SYSTEM …………………………………………………………………………. 268
FUEL SYSTEM ……………………………………………………………………………….. 273
RELEASING THE PRESSURE IN THE HYDRAULIC SYSTEM
(except 580LSP and 590LSP types) ………………………………………………. 279
RELEASING THE PRESSURE IN THE HYDRAULIC SYSTEM
(580LSP and 590LSP types) …………………………………………………………. 280
HYDRAULIC SYSTEM …………………………………………………………………….. 281
AIR FILTER …………………………………………………………………………………….. 285
GEARBOX (except 580LPS and 590 types) ………………………………………… 290
GEARBOX (580LPS and 590 types) ………………………………………………….. 296
Lubrication/Filters/Fluids (continued)
FRONT DRIVE AXLE AND REDUCTION GEARS (4 wheel drive) …………. 301
REAR AXLE AND REDUCTION GEARS ……………………………………………. 306
MAINTENANCE/ADJUSTMENTS …………………………………………………. 314 – 349
WHEELS AND TYRES …………………………………………………………………….. 314
LOADER BUCKET AUTOMATIC RETURN-TO-DIG ADJUSTMENT ……… 317
RADIATOR AND OIL COOLER …………………………………………………………. 318
ENGINE ALTERNATOR AND FAN BELT …………………………………………… 319
ENGINE ROCKER ARM CLEARANCE ADJUSTMENT ……………………….. 321
MACHINE INSPECTION AND CLEANING …………………………………………. 322
CYLINDER LEAK INSPECTION ……………………………………………………….. 322
AIR CONDITIONING ……………………………………………………………………….. 323
CAB FILTERS …………………………………………………………………………………. 325
PARKING BRAKE INSPECTION AND ADJUSTMENT …………………………. 327
BRAKE CHECK ………………………………………………………………………………. 329
CHECKING AND ADJUSTING STABILIZER PLAY
(Offset backhoe version) (except 580LXT type) ……………………………….. 331
BACKHOE BUCKET EXCAVATION POSITION (except 580LXT type) ……. 332
BACKHOE ATTACHMENT LEFT AND RIGHT-HAND SHOCK
ABSORBER ADJUSTMENT (Offset backhoe version)
(except 580LXT type) …………………………………………………………………… 333
RIDE CONTROL SYSTEM ACCUMULATOR ……………………………………… 334
ROPS/FOPS CAB (or protective frame) ……………………………………………… 335
REPLACING A TOOL ON A HYDRAULIC BREAKER ………………………….. 338
REPLACING A TOOL BUSHING ON A HYDRAULIC BREAKER …………… 340
REPLACING A HYDRAULIC BREAKER …………………………………………….. 342
WEAR LIMITS ON A HYDRAULIC BREAKER …………………………………….. 344
ENGINE TROUBLESHOOTING ………………………………………………………… 345
ELECTRICAL SYSTEM ……………………………………………………………….. 350 – 366
FUSES AND RELAYS ……………………………………………………………………… 350
BATTERY ………………………………………………………………………………………. 353
CONNECTING A BOOSTER BATTERY …………………………………………….. 357
ALTERNATOR ………………………………………………………………………………… 358
STARTER MOTOR ………………………………………………………………………….. 358
BULBS …………………………………………………………………………………………… 359
REPLACING A BULB ………………………………………………………………………. 360
VERTICAL ADJUSTMENT OF THE CAB-MOUNTED FRONT
AND REAR WORKING LIGHTS ……………………………………………………. 366
STORAGE …………………………………………………………………………………. 367 – 368
STORING THE MACHINE ………………………………………………………………… 367
SPECIFICATIONS ………………………………………………………………………. 369 – 399
ENGINE (580LE type) ……………………………………………………………………… 369
ENGINE (580SLE, 580LSP and 580LXT types) …………………………………… 369
ENGINE (590 type) ………………………………………………………………………….. 370
Specifications (continued)
ELECTRICAL SYSTEM ……………………………………………………………………. 370
TRANSMISSION (580LE type) ………………………………………………………….. 371
TRANSMISSION (580SLE, 580LSP and 580LXT types) ………………………. 372
TRANSMISSION (580LPS and 590 types) ………………………………………….. 373
AXLES …………………………………………………………………………………………… 374
TYRES …………………………………………………………………………………………… 374
WHEEL TIGHTENING TORQUE ……………………………………………………….. 374
BRAKES ………………………………………………………………………………………… 375
STEERING ……………………………………………………………………………………… 375
HYDRAULIC SYSTEM (580LE and 580LXT types) ……………………………… 376
HYDRAULIC SYSTEM (580SLE, 580LPS and 590SLE types) ………………. 377
HYDRAULIC SYSTEM (580LSP and 590LSP types) ……………………………. 378
CYLINDERS (580LE type) ………………………………………………………………… 379
CYLINDERS (except 580LE type) ……………………………………………………… 380
CAPACITIES …………………………………………………………………………………… 381
CYCLE TIMES (580LE TYPE) …………………………………………………………… 381
CYCLE TIMES (580SLE and 580LSP types) ………………………………………. 381
CYCLE TIMES (except 580LPS and 590 types) …………………………………… 382
CYCLE TIMES (590SLE type) …………………………………………………………… 382
CAB ……………………………………………………………………………………………….. 382
MACHINE WEIGHT (except 580LPS and 590 types) ……………………………. 383
MACHINE WEIGHT (offset backhoe version) (580LPS and 590 types) …… 383
SOUND LEVELS …………………………………………………………………………….. 383
BUCKETS ………………………………………………………………………………………. 384
MACHINE WORKING RANGE (except 580LXT, 580LPS and 590 types) .. 386
WORKING RANGE (580LPS and 590 types) ………………………………………. 388
WORKING RANGE (580LXT type) …………………………………………………….. 390
LOADER BUCKET PALLET FORK WORKING RANGE ……………………….. 391
MACHINE ROAD TRAVEL OVERALL DIMENSIONS
(except 580LXT and 590 types) (offset backhoe version) ………………….. 392
MACHINE OVERALL DIMENSIONS (590 type)
(offset backhoe version) ……………………………………………………………….. 393
MACHINE ROAD TRAVEL OVERALL DIMENSIONS
(except 580LXT and 590 types) (axial backhoe version) …………………… 394
MACHINE ROAD TRAVEL OVERALL DIMENSIONS
(590 type) (axial backhoe version) …………………………………………………. 395
MACHINE OVERALL ROAD TRAVEL DIMENSIONS (580LXT type) ……… 396
HYDRAULIC BREAKER SPECIFICATIONS ……………………………………….. 397
STANDARD AND OPTIONAL ACCESSORIES …………………………………… 399
ALPHABETICAL INDEX ………………………………………………………………. 400 – 403

IMAGES PREVIEW OF THE MANUAL:

Questions? Email us: [email protected]

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.V