Case Mini Excavator CX35B CX39B Series 2 Service Manual 47574272B – PDF DOWNLOAD

Description

Case Mini Excavator CX35B CX39B Series 2 Service Manual

FILE DETAILS:

Case Mini Excavator CX35B CX39B Series 2 Service Manual

Size : 72.4 MB
Format : PDF
Language : English
Number of Pages : 1159 pages
Brand: Case
Type of machine: Mini Excavator
Type of document: Service Manual
Model: Case Mini Excavator CX35B CX39B Series 2
Part No: 47574272B

CASE MINI EXCAVATOR CX35B CX39B SERIES 2 SERVICE MANUAL 47574272B – PDF DOWNLOAD:

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Case Mini Excavator CX35B CX39B Series 2 Service Manual

FOREWORD:

All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel, strictly complying with the instructions given, and using, whenever possible, the special tools. Anyone who performs repair and maintenance operations without complying with the procedures provided herein shall be responsible for any subsequent damages.

• The manufacturer and all the organizations of its distribution chain, including – without limitation – national, regional, or local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manufacturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
• In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case of damages caused by parts and/or components not approved by the manufacturer.
• The information in this manual is up-to-date at the date of the publication. It is the policy of the manufacturer for continuous improvement. Some information could not be updated due to modifications of a technical or commercial type, or changes to the laws and regulations of different countries. In case of questions, refer to your CASE CONSTRUCTION Sales and Service Networks.

PERSONAL SAFETY :

use of the systems very important when performing maintenance operations. Sound knowledge of the system and or components is important before the removal or disassembly of any component. Because of the size of some of the machine components, the serviceman or mechanic should check the weights noted in this manual. Use proper lifting procedures when removing any components. Weight of components table is shown in this section.
The following is a list of basic precautions that must always be observed.
1. Read and understand all Warning plates and decals on the machine before Operating, Maintaining or Repairing this machine.
2. Always wear protective glasses and protective shoes when working around machines. In particular, wear protective glasses when using hammers, punches or drifts on any part of the machine or attachments. Use welders gloves, hood/goggles, apron and the protective clothing appropriate to the welding job being performed. Do not wear loose fitting or torn clothing. Remove all rings from fingers, loose jewellery, confine long hair and loose clothing before working on this machinery.
3. Disconnect the battery and hang a “Maintenance in Progress” tag in the operator’s seat. Remove starter key.
4. If possible, make all repairs with the machine parked on a level and firm surface. Block the machine so it does not roll while working on or under the machine. Hang a “Maintenance in Progress” tag in the operator’s seat.
5. Do not work on any machine that is supported only by lift, jacks or a hoist. Always use blocks or stops for the jack before carrying out any disassembly operation.

TABLE OF CONTENTS:

Case Mini Excavator CX35B CX39B Series 2 Service Manual

INTRODUCTION
Engine 10
[10001] Engine and crankcase 101
[10102] Pan and covers 102
[10106] Valve drive and gears 103
[10101] Cylinder heads104
[10105] Connecting rods and pistons105
[10103] Crankshaft and flywheel106
[10216] Fuel tanks107
[10218] Fuel injection system 108
[10202] Air cleaners and lines 109
[10250] Turbocharger and lines 1010
[10254] Intake and exhaust manifolds and muffler1011
[10400] Engine cooling system1012
[10304] Engine lubrication system 1013
Hydraulic systems 35
[35000] Hydraulic systems 351
[35300] Reservoir, cooler, and filters 352
[35106] Variable displacement pump 353
[35359] Main control valve 354
[35355] Hydraulic hand control 355
[35356] Hydraulic foot control 356
[35352] Hydraulic swing system 357
[35353] Hydraulic travel system 358
[35354] Hydraulic central joint 359
[35736] Boom hydraulic system 3510
[35737] Dipper hydraulic system 3511
47574272B 24/03/2014
[35738] Excavator and backhoe bucket hydraulic system 3512
[35360] Hammer and rotating bucket hydraulic system3513
[35739] Swing arm hydraulic system 3514
[35741] Dozer blade cylinders 3515
Frames and ballasting 39
[39101] Upper frame 391
[39103] Swing ring assembly 392
[39140] Ballasts and supports 393
Tracks and track suspension 48
[48130] Track frame and driving wheels 481
[48100] Tracks 482
[48134] Track tension units 483
[48138] Track rollers 484
Cab climate control 50
[50200] Air conditioning 501
Electrical systems 55
[55000] Electrical system 551
[55100] Harnesses and connectors 552
[55015] Engine control system 553
[55201] Engine starting system 554
[55301] Alternator555
[55302] Battery 556
[55011] Fuel tank system 557
[55013] Engine oil system 558
[55512] Cab controls 559
[55404] External lighting 5510
[55510] Cab or platform harnesses and connectors 5511
Booms, dippers, and buckets 84
47574272B 24/03/2014
[84114] Boom pivoting support 841
[84910] Boom842
[84912] Dipper arm 843
[84100] Bucket 844
Dozer blade and arm 86
[86110] Dozer blade 861
Platform, cab, bodywork, and decals 90
[90150] Cab 901
[90110] Operator platform less cab 902
[90114] Operator protections 903
[90105] Machine shields and guards 904
[90116] Fenders and guards905

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]