Case SR130 SR210 SR160 SR240 SR175 SV185 SV280 Tier 4B Skid Steer Loader TR270 TR310 Tier 4B Compact Track Loader Operator’s Manual

Description

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Case SR130 SR210 SR160 SR240 SR175 SV185 SV280 Tier 4B (final) Alpha Series Skid Steer Loader TR270 TR310 Tier 4B (final) Alpha Series Compact Track Loader Operator’s Manual 47852744 – PDF DOWNLOAD

SR130 SR210
SR160 SR240
SR175 SV185
SV280
Tier 4B (final)
Alpha Series Skid Steer Loader
TR270
TR310
Tier 4B (final)
Alpha Series Compact Track Loader

Part number 47852744
2nd edition English

GENERAL INFORMATION
Note to the Owner :

• This manual contains important information about the safe operation, adjustment, and maintenance of your machine.
  Refer to the detailed INDEX at the end of this manual for locating specific items about your machine. Your machine
  conforms to current safety regulations. Use this manual as a guide. Your machine will remain a reliable working tool
  as long as it is kept in good working condition and serviced properly.
• Use this manual as a guide. Your machine will remain a reliable working tool as long as it is kept in good working
  condition and serviced properly.
• This machine, with standard equipment and authorized attachments, is intended for above ground material handling.
  Use only approved accessories and attachments designed for your machine.
• This operator’s manual is to be stored in the manual compartment equipped on this machine. Make sure this manual
  is complete and in good condition. Contact your authorized dealer to obtain additional manuals. Contact your authorized
  dealer for any further information or assistance about your machine. Your authorized dealer has manufacturer
  approved service parts. Your authorized dealer has technicians with special training that know the best methods or
  repair and maintenance for your machine.
• Your authorized dealer is available for any further information. They will
  also provide any after-sales service you may need, and genuine CASE CONSTRUCTION spare parts, your guarantee
  of quality and match. CASE CONSTRUCTION customer assistance is also available. Go to www.casece.com, or
  if applicable www.caseih.com.
• The information in this manual is provided on the basis of information that was available at the time that the manual
  was written. Settings, procedures, part numbers, software, and other items can change. These changes can affect
  the service that is given to the machine. Ensure that you have complete and current information from your dealer
  before you start any machine operation.

TABLE OF CONTENTS:

Case SR130 SR210 SR160 SR240 SR175 SV185 SV280 Tier 4B (final) Alpha Series Skid Steer Loader TR270 TR310 Tier 4B (final) Alpha Series Compact Track Loader Operator’s Manual 47852744 – PDF DOWNLOAD

1 GENERAL INFORMATION
Note to the Owner 1-1
Electro-Magnetic Compatibility (EMC) 1-3
Product Identification Number (PIN) 1-4
Machine orientation 1-7
Machine components 1-8
Emissions overview (SR210, SR240, SV280, TR270, and TR310) 1-9
Emissions overview (SR130, SR160, SR175, and SV185) 1-12
2 SAFETY INFORMATION
Signal word definitions 2-1
Safety rules 2-2
Utility safety 2-8
Proper entry and exit 2-9
Starting and stopping precautions 2-11
Seat belt precautions 2-12
Specific precautions to this machine 2-14
Fire extinguisher 2-14
Safety rules – California Proposition 65 Warning 2-15
Roll Over Protective Structure (ROPS) 2-16
Welding on the machine 2-17
Loader arm lock and cab tilt procedure – radial lift machines 2-18
Loader arm lock and cab tilt procedure – vertical lift machines 2-22
No engine power – loader arm down control 2-26
Emergency exit 2-27
Machine safety sign information 2-28
Safety signs 2-29
3 CONTROLS AND INSTRUMENTS
ACCESS TO OPERATOR’S PLATFORM
Door latches, cab 3-1
Window glass, cab 3-2
Windshield wiper and washer controls 3-2
Cab air louvers 3-3
OPERATOR’S SEAT
Standard seat 3-4
Mechanical suspension seat 3-4
Air seat 3-4
Seat belt operation 3-5
Shoulder belt 3-6
Restraint bar 3-6
MECHANICAL HYDRAULIC CONTROLS
Steering and travel 3-7
Moving the machine 3-7
Turning the machine 3-8
Lift arm and bucket controls 3-9
Hand controls 3-9
Foot controls 3-10
ELECTRO-HYDRAULIC CONTROLS
Control pattern overview 3-11
Standard H control pattern 3-11
Standard ISO control pattern 3-12
Electro-hydraulic control handle adjustment 3-12
H control pattern steering and travel 3-13
Hand controls 3-13
Moving the machine 3-14
Turning the machine 3-15
H control pattern lift arm and bucket controls 3-16
Lift arm raise/lower control 3-16
Bucket curl/dump control 3-17
ISO control pattern steering and travel 3-18
Moving the machine 3-18
Turning the machine 3-19
ISO control pattern lift arm and bucket controls 3-21
Lift arm and bucket controls 3-21
CONTROL LEVERS
Switch configurations 3-22
Two-speed function 3-27
AUXILIARY HYDRAULICS
Standard auxiliary hydraulics 3-28
High flow auxiliary hydraulics 3-30
Enhanced High Flow (EHF) auxiliary hydraulics 3-32
INSTRUMENT CLUSTER
Electronic Instrument Cluster (EIC) 3-34
Advanced Instrument Cluster (AIC) 3-40
Instrument cluster 3-46
Left-hand column switch identification 3-65
ISO or H pattern control switch 3-67
Machine lights 3-68
4 OPERATING INSTRUCTIONS
COMMISSIONING THE UNIT
Operating Instructions 4-1
STARTING THE UNIT
Engine operation 4-3
Operating in extreme temperatures 4-5
Throttle control 4-6
STOPPING THE UNIT
Parking the machine and stopping the engine 4-7
Booster battery procedure 4-8
MOVING THE UNIT
Machine operation 4-9
5 TRANSPORT OPERATIONS
SHIPPING TRANSPORT
Transporting the machine 5-1
RECOVERY TRANSPORT
Moving a disabled machine 5-13
6 WORKING OPERATIONS
GENERAL INFORMATION
Mechanical attachment mounting systems 6-1
Hydraulic attachment mounting systems 6-4
Field operation 6-6
7 MAINTENANCE
GENERAL INFORMATION
General safety before you service 7-1
Lubrication analysis program 7-3
Plastic and resin parts 7-3
Ecology and the environment 7-3
Machine cleaning 7-4
Window removal and cleaning 7-5
Cab door removal and installation 7-7
Battery safety – check and cleaning 7-8
Fire extinguisher 7-10
Engine hourmeter 7-10
Fluids and lubricants 7-11
Engine oil viscosity 7-12
Hydraulic oil viscosity 7-13
Organic Acid Technology (OAT) coolant 7-14
General specification – Diesel fuel 7-16
General specification – Biodiesel fuels 7-17
Lubrication and maintenance access 7-19
Fuses and relays 7-21
Fuses and relays 7-25
MAINTENANCE CHART
Maintenance chart 7-31
EVERY 10 HOURS OR DAILY
Clean tracks and components 7-32
Wheels and tires 7-34
Engine and hydraulic coolers 7-36
Engine coolant level 7-37
Engine oil level 7-38
Loader arm pivot points, coupler pins, and cylinder pins 7-39
Hydraulic oil level 7-40
Loader arm and bucket hydraulic interlock 7-42
INITIAL 50 HOURS
Final drive oil (track models) 7-43
EVERY 50 HOURS
Cab intake filter 7-44
Alternator and air conditioning compressor (if equipped) belt tension (models SR130,
SR160, SR175, and SV185 only) 7-45
Roll Over Protective Structure (ROPS) mechanism and hardware check 7-45
EVERY 250 HOURS
In-line fuel filter (models SR130 and SR160 only) 7-46
Fuel prefilter 7-47
Drive chain tension check 7-48
EVERY 500 HOURS
Engine oil and filter 7-49
Fuel prefilter 7-51
Fuel filter 7-52
Hydraulic oil filter 7-54
Final drive chain tank oil 7-55
Air cleaner elements 7-58
Hardware – loose or damaged 7-60
Final drive oil (track models) 7-60
EVERY 1000 HOURS
Hydraulic fluid and filter 7-61
Final drive chain tank oil 7-66
Oil Mist Separator (OMS) filter (models SR130, SR160, SR175, and SV185 only) 7-69
EVERY 2000 HOURS
Engine cooling system – Change fluid – SR130, SR160, SR175, and SV185 only 7-70
Engine cooling system – Change fluid – SR210, SR240, SV280, TR270, and TR310 only
7-72
Blow-by recirculation system (models SR210, SR240, SV280, TR270, and TR310
only) 7-74
EVERY 4000 HOURS
Diesel Particulate Filters (DPF) – Cleaning (models SR130 and SR160 only) 7-75
AS REQUIRED
Auto-regeneration 7-76
Manual regeneration 7-77
STORAGE
Storing the machine 7-79
8 TROUBLESHOOTING
FAULT CODE RESOLUTION
Display warnings 8-1
Fault code index 8-2
9 SPECIFICATIONS
General specification 9-1
Material weights 9-17
Units of measure and conversion 9-18
Torque charts – Minimum tightening torques for normal assembly 9-20
10 ACCESSORIES
Telematics – Overview with Case SiteWatch™ 10-1

Contact us: [email protected]

https://vimeo.com/724019252

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.V