Case SR130 SR210 SR160 SR240 SR175 SV185 SV280 Tier 4B & Stage IV Skid Steer TR270 TR310 TV370 Tier 4B & Stage IV Compact Track Operator’s Manual

Description

Case SR130 SR210 SR160 SR240 SR175 SV185 SV280 Tier 4B & Stage IV Skid Steer Loader TR270 TR310 TV370 Tier 4B & Stage IV Compact Track Loader Operator’s Manual 48068199 – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Case SR130 SR210 SR160 SR240 SR175 SV185 SV280 Tier 4B & Stage IV Skid Steer Loader TR270 TR310 TV370 Tier 4B & Stage IV Compact Track Loader Operator’s Manual 48068199 – PDF DOWNLOAD

SR130 SR210
SR160 SR240
SR175 SV185
SV280
Tier 4B (final) and Stage IV
Alpha Series Skid Steer Loader
PIN NHM435463 and above
TR270
TR310
TV370
Tier 4B (final) and Stage IV
Alpha Series Compact Track Loader
PIN NHM435463 and above

GENERAL INFORMATION :
Note to the owner :

• This manual contains important information about the safe operation, adjustment, and maintenance of your machine.
  Refer to the detailed INDEX at the end of this manual for locating specific items about your machine. Your machine
  conforms to current safety regulations. Use this manual as a guide. Your machine will remain a reliable working tool
  as long as it is kept in good working condition and serviced properly.
• Use this manual as a guide. Your machine will remain a reliable working tool as long as it is kept in good working
  condition and serviced properly.
• This machine, with standard equipment and authorized attachments, is intended for above ground material handling.
  Use only approved accessories and attachments designed for your machine.
• This operator’s manual is to be stored in the manual compartment equipped on this machine. Make sure this manual
  is complete and in good condition. Contact your authorized dealer to obtain additional manuals. Contact your authorized
  dealer for any further information or assistance about your machine. Your authorized dealer has manufacturer
  approved service parts. Your authorized dealer has technicians with special training that know the best methods or
  repair and maintenance for your machine. Your authorized dealer is available for any further information. They will
  also provide any after-sales service you may need, and genuine CASE CONSTRUCTION spare parts, your guarantee
  of quality and match.
• The information in this manual is provided on the basis of information that was available at the time that the manual
  was written. Settings, procedures, part numbers, software, and other items can change. These changes can affect
  the service that is given to the machine. Ensure that you have complete and current information from your dealer
  before you start any machine operation.

TABLE OF CONTENTS:

Case SR130 SR210 SR160 SR240 SR175 SV185 SV280 Tier 4B & Stage IV Skid Steer Loader TR270 TR310 TV370 Tier 4B & Stage IV Compact Track Loader Operator’s Manual 48068199 – PDF DOWNLOAD

1 GENERAL INFORMATION
Note to the owner 1-1
Electro-Magnetic Compatibility (EMC) 1-3
Product identification 1-4
Operator’s manual storage on the machine 1-7
Machine orientation 1-8
Machine components 1-9
Official documents 1-10
Emissions overview (SR130, SR160, SR175, and SV185) 1-13
Emissions overview (SR210, SR240, SV280, TR270, TR310, and TV370) 1-19
2 SAFETY INFORMATION
Safety rules and signal word definitions 2-1
Safety rules 2-2
Airborne noise emission 2-8
Utility safety 2-10
Proper entry and exit 2-11
Starting and stopping precautions 2-13
Seat belt precautions 2-14
Specific precautions to this machine 2-16
Fire extinguisher 2-16
Roll Over Protective Structure (ROPS) 2-17
Welding on the machine 2-19
Loader arm lock and cab tilt procedure – radial lift machines 2-20
Loader arm lock and cab tilt procedure – vertical lift machines 2-24
No engine power – loader arm up and down control 2-28
Emergency exit 2-29
Ecology and the environment 2-30
Safety signs 2-31
3 CONTROLS AND INSTRUMENTS
ACCESS TO OPERATOR’S PLATFORM
Door latches, cab 3-1
Window glass, cab 3-2
Windshield wiper and washer controls 3-3
Cab air louvers 3-3
OPERATOR’S SEAT
Standard seat 3-4
Mechanical suspension seat 3-4
Air seat 3-4
Seat belt operation 3-5
Shoulder belt 3-6
Restraint bar 3-6
MECHANICAL HYDRAULIC CONTROLS
Steering and travel 3-7
Moving the machine 3-7
Turning the machine 3-8
Lift arm and bucket controls 3-9
Hand controls 3-9
Foot controls 3-10
ELECTRO-HYDRAULIC CONTROLS
Control pattern overview 3-11
Standard H control pattern 3-11
Standard ISO control pattern 3-12
Electro-hydraulic control handle adjustment 3-12
H control pattern steering and travel 3-13
Hand controls 3-13
Moving the machine 3-14
Turning the machine 3-15
H control pattern lift arm and bucket controls 3-16
Lift arm raise/lower control 3-16
Bucket curl/dump control 3-17
ISO control pattern steering and travel 3-18
Moving the machine 3-18
Turning the machine 3-19
ISO control pattern lift arm and bucket controls 3-21
Lift arm and bucket controls 3-21
CONTROL LEVERS
Switch configurations 3-22
Two-speed function 3-27
AUXILIARY HYDRAULICS
Standard auxiliary hydraulics 3-28
High flow auxiliary hydraulics 3-30
Enhanced High Flow (EHF) auxiliary hydraulics 3-32
INSTRUMENT CLUSTER
Electronic Instrument Cluster (EIC) 3-34
Advanced Instrument Cluster (AIC) 3-40
Instrument cluster 3-46
Instrument cluster SETUP menu 3-47
Instrument cluster display setting 3-48
Electro-Hydraulic (EH) controllability selection 3-49
Temperature display selection 3-55
View or reset Job Timer (JTIME) 3-56
Regeneration inhibit 3-57
Oil life reset 3-58
Anti-theft protection 3-59
Instrument cluster time-out feature 3-65
Left-hand column switch identification 3-66
ISO or H pattern control switch 3-69
Machine lights 3-70
Radio (if equipped) 3-71
4 OPERATING INSTRUCTIONS
COMMISSIONING THE UNIT
Operating Instructions 4-1
STARTING THE UNIT
Engine operation 4-3
Operating in extreme temperatures 4-5
Throttle control 4-6
Booster battery procedure 4-7
STOPPING THE UNIT
Parking the machine and stopping the engine 4-8
MOVING THE UNIT
Machine operation 4-9
5 TRANSPORT OPERATIONS
SHIPPING TRANSPORT
Transporting the machine 5-1
RECOVERY TRANSPORT
Moving a disabled machine 5-13
6 WORKING OPERATIONS
GENERAL INFORMATION
Mechanical attachment mounting systems 6-1
Hydraulic attachment mounting systems 6-4
Field operation 6-6
7 MAINTENANCE
GENERAL INFORMATION
General safety before you service 7-1
Lubrication analysis program 7-3
Plastic and resin parts 7-3
Machine cleaning 7-4
Cab door removal and installation 7-5
Battery safety – check and cleaning 7-6
Fire extinguisher 7-8
Engine hourmeter 7-8
Fluids and lubricants 7-9
Engine oil viscosity 7-10
Hydraulic oil viscosity 7-11
Organic Acid Technology (OAT) coolant 7-12
General specification – Diesel fuel 7-14
General specification – Biodiesel fuels 7-15
Lubrication and maintenance access 7-17
Fuses and relays 7-19
MAINTENANCE CHART
Maintenance chart 7-28
INITIAL 10 HOURS
Track tension check and adjustment 7-30
Tire pressure and wheel hardware torque 7-31
Alternator and air conditioning compressor (if equipped) belt tension (models SR130,
SR160, SR175, and SV185 only) 7-33
EVERY 10 HOURS OR DAILY
Clean tracks and components 7-34
Engine and hydraulic coolers 7-35
Engine coolant level 7-36
Engine oil level 7-37
Loader arm pivot points, coupler pins, and cylinder pins 7-38
Hydraulic oil level 7-39
Loader arm and bucket hydraulic interlock 7-40
INITIAL 50 HOURS
Roll Over Protective Structure (ROPS) mechanism and hardware check 7-41
EVERY 50 HOURS
Track tension check and adjustment 7-42
Cab intake filter 7-43
Seat restraints – Check 7-44
INITIAL 100 HOURS
Final drive oil (track models) 7-45
EVERY 250 HOURS
In-line fuel filter (models SR130 and SR160 only) 7-46
Fuel-water separator filter – drain fluid 7-47
Drive chain tension check 7-48
Tire pressure and wheel hardware torque 7-49
EVERY 500 HOURS
Engine oil and filter 7-51
Fuel-water separator filter element 7-56
Fuel filter 7-58
Hydraulic oil filter 7-61
Final drive chain tank oil 7-62
Air cleaner elements 7-65
Final drive oil (track models) 7-67
Roll Over Protective Structure (ROPS) mechanism and hardware check 7-68
Cab door – Grease 7-69
EVERY 1000 HOURS
Hydraulic fluid and filter 7-70
Final drive chain tank oil 7-74
Oil Mist Separator (OMS) filter (models SR130, SR160, SR175, and SV185 only) 7-77
EVERY 2000 HOURS
Blow-by recirculation system (models SR210, SR240, SV280, TR270, TR310, and TV370
only) 7-78
EVERY 4000 HOURS
Diesel Particulate Filters (DPF) – Cleaning (models SR130 and SR160 only) 7-79
Engine cooling system – Change fluid – SR130, SR160, SR175, and SV185 only 7-80
Engine cooling system – Change fluid – SR210, SR240, SV280, TR270, TR310, and TV370
only 7-82
AS REQUIRED
Auto-regeneration 7-84
Manual regeneration 7-85
Hardware – loose or damaged 7-87
Window removal and cleaning 7-88
STORAGE
Storing the machine 7-95
Preparing the machine after storage 7-96
8 TROUBLESHOOTING
FAULT CODE RESOLUTION
Display warnings 8-1
Fault code index 8-2
9 SPECIFICATIONS
Fluids and lubricants 9-1
General specification 9-2
Product identification – attachments 9-20
Material weights 9-27
Units of measure and conversion 9-28
Torque charts – Minimum tightening torques for normal assembly 9-30
10 ACCESSORIES
Telematics – Overview with Case SiteWatch™ 10-

Questions? Email us: [email protected]

https://vimeo.com/723990048

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.V