Case SR130B SR150B SR175B SR200B SR220B SR250B SV185B SV250B SV300B Tier 3 Skid Steer Loader TR270B TR320B TV380B Tier 3 Compact Track Loader Operator’s Manual 51518333

Description

Case SR130B SR150B SR175B SR200B SR220B SR250B SV185B SV250B SV300B Tier 3 Skid Steer Loader TR270B TR320B TV380B Tier 3 Compact Track Loader Operator’s Manual 51518333 – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Case SR130B SR150B SR175B SR200B SR220B SR250B SV185B SV250B SV300B Tier 3 Skid Steer Loader TR270B TR320B TV380B Tier 3 Compact Track Loader Operator’s Manual 51518333 – PDF DOWNLOAD

SR130B
SR150B
SR175B
SR200B
SR220B
SR250B
SV185B
SV250B
SV300B
Tier 3
B Series Skid Steer Loader
PIN NJM453496 and above
TR270B
TR320B
TV380B
Tier 3
B Series Compact Track Loader
PIN NJM453496 and above

GENERAL INFORMATION :
Note to the owner :

• This manual contains important information about the safe operation, adjustment, and maintenance of your machine.
  Refer to the detailed INDEX at the end of this manual for locating specific items about your machine. Your machine
  conforms to current safety regulations. Use this manual as a guide. Your machine will remain a reliable working tool
  as long as it is kept in good working condition and serviced properly.
• Use this manual as a guide. Your machine will remain a reliable working tool as long as it is kept in good working
  condition and serviced properly.
• This machine, with standard equipment and authorized attachments, is intended for above ground material handling.
  Use only approved accessories and attachments designed for your machine.
• This operator’s manual is to be stored in the manual compartment equipped on this machine. Make sure this manual
  is complete and in good condition. Contact your authorized dealer to obtain additional manuals. Contact your authorized
  dealer for any further information or assistance about your machine. Your authorized dealer has manufacturer
  approved service parts. Your authorized dealer has technicians with special training that know the best methods or
  repair and maintenance for your machine. Your authorized dealer is available for any further information. They will
  also provide any after-sales service you may need, and genuine CASE CONSTRUCTION spare parts, your guarantee
  of quality and match.
• The information in this manual is provided on the basis of information that was available at the time that the manual
  was written. Settings, procedures, part numbers, software, and other items can change. These changes can affect
  the service that is given to the machine. Ensure that you have complete and current information from your dealer
  before you start any machine operation.

TABLE OF CONTENTS:

Case SR130B SR150B SR175B SR200B SR220B SR250B SV185B SV250B SV300B Tier 3 Skid Steer Loader TR270B TR320B TV380B Tier 3 Compact Track Loader Operator’s Manual 51518333 – PDF DOWNLOAD

1 GENERAL INFORMATION
Note to the owner 1-1
Electro-Magnetic Compatibility (EMC) 1-3
Product identification 1-4
Operator’s manual storage on the machine 1-8
Machine orientation 1-8
Machine components 1-9
2 SAFETY INFORMATION
Safety rules and signal words 2-1
Safety rules 2-2
Utility safety 2-8
Proper entry and exit 2-9
Starting and stopping precautions 2-11
Seat belt precautions 2-12
Specific precautions to this machine 2-14
Fire extinguisher 2-14
Roll Over Protection Structure (ROPS) 2-15
Welding on the machine 2-16
Loader arm lock and cab tilt procedure – radial lift machines 2-17
Loader arm lock and cab tilt procedure – vertical lift machines 2-21
No engine power – loader arm up and down control 2-25
Emergency exit 2-26
Ecology and the environment 2-27
Safety signs 2-28
3 CONTROLS AND INSTRUMENTS
Access to operator’s platform
Door latches, cab 3-1
Window glass, cab 3-2
Windshield wiper and washer controls 3-3
Cab air louvers 3-4
Operator’s seat
Standard seat 3-5
Mechanical suspension seat 3-5
Air seat 3-5
Seat belt operation 3-6
Shoulder belt 3-7
Restraint bar 3-7
Mechanical hydraulic controls
Steering and travel 3-8
Moving the machine 3-8
Turning the machine 3-9
Lift arm and bucket controls 3-10
Hand controls 3-10
Foot controls 3-10
Electro-Hydraulic (EH) controls
Electro-hydraulic control handle adjustment 3-11
Control pattern overview 3-12
Standard H control pattern 3-12
Standard ISO control pattern 3-13
H control pattern steering and travel 3-14
Hand controls 3-14
Moving the machine 3-15
Turning the machine 3-15
H control pattern lift arm and bucket controls 3-17
Lift arm raise/lower control 3-17
Bucket curl/dump control 3-17
ISO control pattern steering and travel 3-18
Moving the machine 3-18
Turning the machine 3-19
ISO control pattern lift arm and bucket controls 3-21
Lift arm and bucket controls 3-21
Control levers
Control handle switch configurations 3-22
Two-speed function 3-27
Auxiliary hydraulics
Standard auxiliary hydraulics 3-28
High flow auxiliary hydraulics 3-30
Enhanced High Flow (EHF) auxiliary hydraulics 3-32
Right-hand side controls
Right-hand side controls – identification 3-34
Instrument cluster navigation buttons 3-41
Instrument cluster main menu 3-42
Instrument cluster with EZ-EH 3-43
Instrument cluster display setting 3-45
Auxiliary hydraulic interlock override (AUX OVRRD) 3-46
Temperature display selection 3-47
View or reset Job Timer (JTIME) 3-48
Anti-theft protection 3-49
Electro-Hydraulic (EH) controllability selection 3-54
ISO or H pattern control switch 3-58
Radio (if equipped) 3-59
Left-hand side controls
Left-hand column switch identification 3-60
4 OPERATING INSTRUCTIONS
Commissioning the unit
Operating Instructions 4-1
Starting the unit
Engine operation 4-3
Operating in extreme temperatures 4-5
Throttle control 4-6
Booster battery procedure 4-8
Stopping the unit
Parking the machine and stopping the engine 4-9
Moving the unit
Machine operation 4-9
5 TRANSPORT OPERATIONS
Shipping transport
Transporting the machine 5-1
Recovery transport
Moving a disabled machine 5-13
6 WORKING OPERATIONS
General information
Mechanical attachment mounting systems 6-1
Hydraulic attachment mounting systems 6-4
Field operation 6-6
Operating the machine in water 6-11
7 MAINTENANCE
General information
General safety before you service 7-1
Lubrication analysis program 7-3
Plastic and resin parts 7-3
Cleaning the machine 7-4
Cab door removal and installation 7-5
Battery safety – check and cleaning 7-6
Battery removal and installation 7-8
Battery disconnect switch 7-14
Fire extinguisher 7-15
Engine hourmeter 7-15
Lubrication and maintenance access 7-16
Fluids and lubricants 7-17
Recommended engine oil for operating temperature ranges 7-18
Hydraulic oil viscosity 7-19
Biodiesel fuel 7-20
Organic Acid Technology (OAT) coolant 7-21
Maintenance planning
Maintenance chart 7-22
Initial 10 hours
Track tension check and adjustment 7-23
Tire pressure and wheel hardware torque 7-24
Alternator and air conditioning compressor (if equipped) belt tension 7-26
Every 10 hours or daily
Clean tracks and components 7-27
Engine and hydraulic coolers 7-28
Engine coolant level 7-29
Engine oil level 7-31
Loader arm pivot points, coupler pins, and cylinder pins 7-32
Hydraulic oil level 7-33
Loader arm and bucket hydraulic interlock 7-34
Initial 50 hours
Engine oil and filter 7-35
Roll Over Protective Structure (ROPS) mechanism and hardware check 7-40
Every 50 hours
Track tension check and adjustment 7-41
Tire pressure and wheel hardware torque 7-42
Cab intake filter 7-44
Seat belt 7-45
Initial 100 hours
Final drive oil (track models) 7-46
Every 250 hours
Drain water from fuel filter 7-47
In-line fuel filter 7-48
Tire pressure and wheel hardware torque 7-50
Drive chain tension check 7-52
Every 500 hours
Engine air cleaner elements 7-53
Engine oil and filter 7-55
Final drive chain tank oil 7-60
Primary fuel filter 7-63
Hydraulic oil filter 7-64
Final drive oil (track models) 7-65
Roll Over Protective Structure (ROPS) mechanism and hardware check 7-66
Cab door – Grease 7-67
Every 1000 hours
Hydraulic oil and filter 7-68
Final drive chain tank oil 7-72
Engine valve clearance 7-75
Every 4000 hours
Radiator drain and flush 7-76
As required
Hardware – loose or damaged 7-79
Window removal and cleaning 7-80
Fuse and relay locations
Fuses and relays 7-85
Storage
Storing the machine 7-91
Preparing the machine after storage 7-92
8 TROUBLESHOOTING
Fault code resolution
Display warnings 8-1
Fault code index 8-2
9 SPECIFICATIONS
General specification 9-1
Fluids and lubricants 9-21
Product identification – attachments 9-22
Material weights 9-29
Units of measure and conversion 9-30
Torque charts – Minimum tightening torques for normal assembly 9-32
10 ACCESSORIES
Telematics – Overview with Case SiteWatch™ 10-1

Questions? Email us: [email protected]

PLEASE NOTE:

• This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
• The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
• Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer

S.V