Case TV450 Tier 4B (final) & Stage IV Alpha Series Compact Track Loader Operator’s Manual 48174816

Description

Case TV450 Tier 4B (final) & Stage IV Alpha Series Compact Track Loader Operator’s Manual 48174816 – PDF DOWNLOAD

DESCRIPTION:

Case TV450 Tier 4B (final) & Stage IV Alpha Series Compact Track Loader Operator’s Manual 48174816 – PDF DOWNLOAD

PIN NHM435463 and above

GENERAL INFORMATION :
Note to the owner :

• This manual contains important information about the safe operation, adjustment, and maintenance of your machine.
  Refer to the detailed INDEX at the end of this manual for locating specific items about your machine. Your machine
  conforms to current safety regulations. Use this manual as a guide. Your machine will remain a reliable working tool
  as long as it is kept in good working condition and serviced properly.
• This machine, with standard equipment and authorized attachments, is intended for above ground material handling.
  Use only approved accessories and attachments designed for your machine.
• This operator’s manual is to be stored in the manual compartment equipped on this machine. Make sure this manual
  is complete and in good condition. Contact your authorized dealer to obtain additional manuals. Contact your authorized
  dealer for any further information or assistance about your machine. Your authorized dealer has manufacturer
  approved service parts. Your authorized dealer has technicians with special training that know the best methods or
  repair and maintenance for your machine. Your authorized dealer is available for any further information. They will
  also provide any after-sales service you may need, and genuine CASE CONSTRUCTION spare parts, your guarantee
  of quality and match.
• The information in this manual is provided on the basis of information that was available at the time that the manual
  was written. Settings, procedures, part numbers, software, and other items can change. These changes can affect
  the service that is given to the machine. Ensure that you have complete and current information from your dealer
  before you start any machine operation.

TABLE OF CONTENTS:

Case TV450 Tier 4B (final) & Stage IV Alpha Series Compact Track Loader Operator’s Manual 48174816 – PDF DOWNLOAD

1 GENERAL INFORMATION
Note to the owner 1-1
Electro-Magnetic Compatibility (EMC) 1-3
Product identification 1-4
Operator’s manual storage on the machine 1-7
Machine orientation 1-8
Machine components 1-9
Official documents 1-10
Selective Catalytic Reduction (SCR) exhaust treatment – Product overview 1-13
2 SAFETY INFORMATION
Safety rules and signal word definitions 2-1
Safety rules 2-2
Airborne noise emission 2-8
Utility safety 2-10
Proper entry and exit 2-11
Starting and stopping precautions 2-13
Seat belt precautions 2-14
Specific precautions to this machine 2-16
Fire extinguisher 2-16
Roll Over Protective Structure (ROPS) 2-17
Welding on the machine 2-19
Loader arm lock and cab tilt procedure – radial lift machines 2-20
Loader arm lock and cab tilt procedure – vertical lift machines 2-24
No engine power – loader arm up and down control 2-28
Emergency exit 2-29
Ecology and the environment 2-30
Safety signs 2-31
3 CONTROLS AND INSTRUMENTS
ACCESS TO OPERATOR’S PLATFORM
Door latches, cab 3-1
Window glass, cab 3-2
Windshield wiper and washer controls 3-3
Cab air louvers 3-4
OPERATOR’S SEAT
Standard seat 3-5
Mechanical suspension seat 3-5
Air seat 3-5
Seat belt operation 3-6
Shoulder belt 3-7
Restraint bar 3-7
MECHANICAL HYDRAULIC CONTROLS
Steering and travel 3-8
Moving the machine 3-8
Turning the machine 3-9
Lift arm and bucket controls 3-10
Hand controls 3-10
Foot controls 3-11
ELECTRO-HYDRAULIC CONTROLS
Control pattern overview 3-12
Standard H control pattern 3-12
Standard ISO control pattern 3-13
Electro-hydraulic control handle adjustment 3-13
H control pattern steering and travel 3-14
Hand controls 3-14
Moving the machine 3-15
Turning the machine 3-16
H control pattern lift arm and bucket controls 3-17
Lift arm raise/lower control 3-17
Bucket curl/dump control 3-18
ISO control pattern steering and travel 3-19
Moving the machine 3-19
Turning the machine 3-20
ISO control pattern lift arm and bucket controls 3-22
Lift arm and bucket controls 3-22
CONTROL LEVERS
Switch configurations 3-23
Two-speed function 3-28
AUXILIARY HYDRAULICS
Standard auxiliary hydraulics 3-29
High flow auxiliary hydraulics 3-31
Enhanced High Flow (EHF) auxiliary hydraulics 3-33
INSTRUMENT CLUSTER
Electronic Instrument Cluster (EIC) 3-35
Advanced Instrument Cluster (AIC) 3-41
Selective Catalytic Reduction (SCR) exhaust treatment – Overview 3-47
Instrument cluster 3-58
Instrument cluster SETUP menu 3-59
Instrument cluster display setting 3-60
Electro-Hydraulic (EH) controllability selection 3-61
Temperature display selection 3-66
View or reset Job Timer (JTIME) 3-67
Oil life reset 3-68
Anti-theft protection 3-69
Instrument cluster time-out feature 3-75
Left-hand column switch identification 3-76
ISO or H pattern control switch 3-78
Machine lights 3-79
Radio (if equipped) 3-79
4 OPERATING INSTRUCTIONS
COMMISSIONING THE UNIT
Operating Instructions 4-1
STARTING THE UNIT
Engine operation 4-3
Operating in extreme temperatures 4-5
Throttle control 4-6
Booster battery procedure 4-7
STOPPING THE UNIT
Parking the machine and stopping the engine 4-8
MOVING THE UNIT
Machine operation 4-9
5 TRANSPORT OPERATIONS
SHIPPING TRANSPORT
Transporting the machine 5-1
RECOVERY TRANSPORT
Moving a disabled machine 5-9
6 WORKING OPERATIONS
GENERAL INFORMATION
Mechanical attachment mounting systems 6-1
Hydraulic attachment mounting systems 6-4
Field operation 6-6
7 MAINTENANCE
GENERAL INFORMATION
General safety before you service 7-1
Lubrication analysis program 7-3
Plastic and resin parts 7-3
Machine cleaning 7-4
Cab door removal and installation 7-5
Battery safety – check and cleaning 7-6
Battery removal and installation 7-8
Fire extinguisher 7-14
Engine hourmeter 7-14
Fluids and lubricants 7-15
Engine oils 7-16
Hydraulic oil viscosity 7-17
Organic Acid Technology (OAT) coolant 7-18
General specification – Diesel fuel 7-19
General specification – Biodiesel fuels 7-20
Lubrication and maintenance access 7-22
Selective Catalytic Reduction (SCR) exhaust treatment – Basic instructions 7-24
Fuses and relays 7-26
MAINTENANCE CHART
Maintenance chart 7-31
Initial 10 hours
Track tension check and adjustment 7-33
Tire pressure and wheel hardware torque 7-34
Every 10 hours or daily
Clean tracks and components 7-36
Engine and hydraulic coolers 7-37
Engine coolant level 7-38
Engine oil level 7-39
Loader arm pivot points, coupler pins, and cylinder pins – Vertical lift 7-40
Loader arm pivot points, coupler pins, and cylinder pins – Radial lift 7-40
Hydraulic oil level 7-41
Loader arm and bucket hydraulic interlock 7-43
Initial 50 hours
Roll Over Protective Structure (ROPS) mechanism and hardware check 7-44
Every 50 hours
Track tension check and adjustment 7-45
Wheels and tires 7-46
Cab intake filter 7-48
Initial 100 hours
Final drive oil (track models) 7-49
Every 250 hours
Drive chain tension check 7-50
Fuel-water separator filter – drain fluid 7-51
Every 500 hours
Engine oil and filter 7-52
Fuel-water separator filter element 7-56
Fuel filter 7-57
Diesel Exhaust Fluid (DEF)/AdBlue® tank filter 7-58
Diesel Exhaust Fluid (DEF)/AdBlue® sending unit filter – Vertical lift 7-61
Diesel Exhaust Fluid (DEF)/AdBlue® sending unit filter – Radial lift 7-63
Hydraulic oil filter 7-65
Final drive chain tank oil 7-66
Air cleaner elements 7-67
Final drive oil (track models) 7-70
Cab door – Grease 7-71
Roll Over Protective Structure (ROPS) mechanism and hardware check 7-72
Every 1000 hours
Hydraulic fluid and filter 7-73
Final drive chain tank oil 7-77
Every 1500 hours
Blow-by recirculation system 7-78
Every 3600 hours or two years
Selective Catalytic Reduction (SCR) system – Replace supply module filter – Radial lift
machines only 7-80
Selective Catalytic Reduction (SCR) system – Replace supply module filter – Vertical lift
machines only 7-83
Every 4000 hours
Engine cooling system – Change fluid 7-86
As required
Hydrocarbon management 7-91
Window removal and cleaning 7-92
Hardware – loose or damaged 7-99
STORAGE
Storing the machine 7-100
8 TROUBLESHOOTING
FAULT CODE RESOLUTION
Display warnings 8-1
Fault code index 8-2
9 SPECIFICATIONS
Fluids and lubricants 9-1
General specification 9-2
Product identification – attachments 9-14
Material weights 9-20
Units of measure and conversion 9-21
Torque charts – Minimum tightening torques for normal assembly 9-23
10 ACCESSORIES
Telematics – Overview with Case SiteWatch™ 10-1

IMAGES PREVIEW OF THE MANUAL:

Customer Support: [email protected]

https://vimeo.com/723696862

PLEASE NOTE:

• This is the SAME MANUAL used by the dealerships to diagnose your vehicle
• No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
• Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
• So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com

S.V