Case TX130-40 TX130-43 TX130-45 TX140-43 TX140-45 TX170-45 Tier 3 Telescopic Handler Operator’s Manual

Description

Case TX130-40 TX130-43 TX130-45 TX140-43 TX140-45 TX170-45 Tier 3 Telescopic Handler Operator’s Manual 47798688 – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Case TX130-40 TX130-43 TX130-45 TX140-43 TX140-45 TX170-45 Tier 3 Telescopic Handler Operator’s Manual 47798688 – PDF DOWNLOAD

GENERAL INFORMATION :
General :

Your machine was designed to power and propel itself and it is intended for use in normal and customary applications. It is also designed to give maximum performance, economy and ease of operation under a wide variety of operating conditions.

• The machine has been designed and manufactured according to the strictest quality standards and complies with the standard 2006/42/EC. However, the risk of accidents can never be completely excluded. That is why it is essential to observe elementary safety rules and precautions.
• Prior to delivery, the machine was carefully inspected, both at the factory and by your dealer, to ensure that it reaches you in optimum condition. To maintain this condition and ensure trouble-free operation, it is important that the routine service operations, as specified in Maintenance Chart (-A.90.A.50) of this manual, are carried out at the recommended intervals.

TABLE OF CONTENTS:

Case TX130-40 TX130-43 TX130-45 TX140-43 TX140-45 TX170-45 Tier 3 Telescopic Handler Operator’s Manual 47798688 – PDF DOWNLOAD

1 GENERAL INFORMATION
General 1-1
Safety instructions 1-3
Product identification 1-4
Engine identification 1-5
Powershift transmission 1-6
Identification of attachments 1-7
2 SAFETY INFORMATION
Safety precautions and introduction 2-1
Safety instructions 2-2
Frame – Foreword 2-15
Summary of safety rules 2-16
Safety decals 2-17
Information concerning airborne noise emission 2-27
Load status indicator panel 2-28
Safety features and options vehicle security 2-42
Road travel requirements – in cab 2-43
Road travel requirements – external 2-44
‘EC’ Regulations – Europe 2-47
3 CONTROLS AND INSTRUMENTS
ACCESS TO OPERATOR’S PLATFORM
Before operating 3-1
Cab 3-2
Safety belt 3-3
Handles and windows 3-4
Steering geometry selector 3-6
Instrument console 3-7
Load status indicator panel 3-11
Multi-function lever 3-13
Switches (Right hand panel) 3-14
Safety key and selecting operation 3-16
Powershift transmission 3-17
Transmission disconnection 3-19
Operating the engine 3-20
OPERATOR’S SEAT
Seat 3-21
FORWARD CONTROLS
Hand and foot operating controls 3-21
Steering wheel adjustment handle 3-24
LEFT-HAND SIDE CONTROLS
Parking brake 3-25
EXTERIOR CONTROLS
Cab heating controls 3-25
Air conditioning system (where fitted) 3-26
Airflow vents 3-27
Sun visor 3-28
Refrigerant R134a 3-29
Instrument cluster
Universal symbology 3-30
Monitoring machine functions 3-32
4 OPERATING INSTRUCTIONS
STARTING THE UNIT
Starting the engine 4-1
Under cold climates or when the engine is not warmed-up 4-2
STOPPING THE UNIT
Stopping the engine 4-3
MOVING THE UNIT
Driving the Telehandler 4-3
Transport 4-6
5 TRANSPORT OPERATIONS
RECOVERY TRANSPORT
Lifting 5-1
6 WORKING OPERATIONS
GENERAL INFORMATION
Before operating 6-1
Front loader controls / operation 6-2
Load handling 6-3
Ballasting and Tires 6-9
Weighing the machine 6-10
7 MAINTENANCE
GENERAL INFORMATION
Starting the engine with jump leads 7-1
Cleaning 7-2
Lubrication and maintenance 7-3
General maintenance 7-8
Fuse and relay replacement 7-14
Tires and wheels 7-16
MAINTENANCE CHART
Maintenance chart 7-17
Daily checks required
Engine oil level 7-18
Radiator coolant recovery 7-19
Radiator coolant 7-20
Transmission oil level 7-21
Windscreen washer reservoir 7-22
Hydraulic oil level 7-23
Cylinder and Bush lubrication 7-23
Timing of the extension of the boom 7-25
Every 50 hours
Radiator 7-26
Front loader arm sliding blocks 7-27
Cab air filter 7-28
Wheels and tires 7-29
Front and rear wheel nuts 7-30
Front and axle joint bearings 7-31
Drive shaft joints 7-32
Front and rear axle supports 7-33
Fuel filter 7-34
Every 250 hours
Engine air cleaner 7-35
Front loader arm sliding blocks 7-36
Air conditioning compressor drive belt 7-37
Every 500 hours
Engine oil and filter 7-38
Front and rear axle differential oil level 7-39
Front and rear axle hub oil level 7-40
Fuel filter 7-41
Priming the fuel system 7-42
Engine air cleaner 7-43
Hydraulic reservoir oil filter 7-44
Battery electrolyte level 7-45
Every 1000 hours or annually
Transmission/drop box oil and filter 7-47
Front and rear axle differential oil level 7-49
Front and rear axle hub draining 7-50
Alternator drive belt 7-51
Valve clearance 7-52
Cab air filter 7-53
Every 2000 hours or every two years
Engine coolant 7-54
Hydraulic reservoir output grilled filter 7-57
Hydraulic oil 7-58
Foot brakes 7-59
STORAGE
Vehicle prolonged inactivity 7-60
Tires and wheels 7-61
Jump starting 7-63
Turbocharger 7-64
8 TROUBLESHOOTING
FAULT CODE RESOLUTION
Troubleshooting 8-1
Engine 8-1
Gearshifting 8-2
Electrical system 8-3
Hydraulic system 8-4
Cab 8-5
9 SPECIFICATIONS
General description 9-1
General specifications 9-3
Dimensions 9-4
Specifications 9-18
Tyre pressures 9-21
10 ACCESSORIES
Introduction 10-1
Weight of machines and attachments 10-2
Attachment dimensions 10-3
11 FORMS AND DECLARATIONS
Advice 11-1
First service – dealer copy 11-2
First service – owner copy 11-3
Lubricants and coolants 11-4
Change the Organic Acid Technology (OAT) coolant 11-6
Declaration of conformity 11-8

Contact us: [email protected]

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted

S.V