Case WX210 & WX240 Industry Tier 3 Wheeled Hydraulic Excavators Operator’s Manual 87618263 – PDF DOWNLOAD

Description

Case WX210 & WX240 Industry Tier 3 Wheeled Hydraulic Excavators Operator’s Manual 87618263 – PDF DOWNLOAD

DESCRIPTION:

Case WX210 & WX240 Industry Tier 3 Wheeled Hydraulic Excavators Operator’s Manual 87618263 – PDF DOWNLOAD

FOREWORD:

The current Operator’s Manual is the user’s guide for correct run-in, use and maintenance of the machine. Carefully read this Operator’s Manual and store it in the cab for quick location and reference. Instructions concerning safety, operation and maintenance have been developed to permit safe service and operation of this machine.

• In the event of queries or suggestions relevant to your machine do not hesitate to address to your Dealer. Dealers have qualified and trained personnel at disposal as well as Original Spares, means and equipment suitable to carry out all necessary maintenance.
• Do not use this machine for any applications or purposes other than those described in this Manual. If you use this machine for duties involving the use of attachments, accessories, or special tools, consult your Dealer to make sure that the adaptations or modifications carried out are in conformity with the machine’s technical specifications and with current regulations on safety.
• Any modifications or adaptations which are not approved by the Manufacturer may invalidate the machine’s original conformity with safety requirements.

TABLE OF CONTENTS:

Case WX210 & WX240 Industry Tier 3 Wheeled Hydraulic Excavators Operator’s Manual 87618263 – PDF DOWNLOAD

1 – INTRODUCTION, SAFETY, PLATES AND DECALS
2 – CONTROLS AND INSTRUMENTS
3 – OPERATING THE MACHINE
4 – SUPPLIES AND MAINTENANCE CHART
5 – TROUBLESHOOTING
6 – STORAGE
7 – ACCESSORIES
8 – DATA AND TECHNICAL SPECIFICATIONS
9 – ALPHABETICAL INDEX

SECTION 1
INTRODUCTION, SAFETY, PLATES AND DECALS ……………………………………………………………………… 1-1
FOREWORD……………………………………………………………………………………………………………………………. 1-1
SAFETY INSTRUCTIONS…………………………………………………………………………………………………………. 1-2
GENERAL SAFETY INSTRUCTIONS………………………………………………………………………………………. 1-2
DESIGNATED USE ……………………………………………………………………………………………………………….. 1-3
NOISE LEVELS …………………………………………………………………………………………………………………….. 1-4
LEVEL OF VIBRATIONS TRANSMITTED TO THE OPERATOR…………………………………………………. 1-5
BEFORE OPERATING THE MACHINE ……………………………………………………………………………………. 1-6
OPERATING THE MACHINE………………………………………………………………………………………………….. 1-8
TRAVEL……………………………………………………………………………………………………………………………… 1-10
TRAVELLING ON PUBLIC ROADS ……………………………………………………………………………………….. 1-12
JOB SITE OPERATION………………………………………………………………………………………………………… 1-12
PARKING THE MACHINE…………………………………………………………………………………………………….. 1-14
LOADING THE MACHINE ON A TRAILER……………………………………………………………………………… 1-15
MACHINE TRANSPORT ………………………………………………………………………………………………………. 1-16
UNLOADING THE MACHINE FROM A TRAILER…………………………………………………………………….. 1-17
MAINTENANCE AND ADJUSTMENTS…………………………………………………………………………………… 1-18
PREVENTION OF FIRE OR EXPLOSIONS…………………………………………………………………………….. 1-21
PREVENTION OF BURNS……………………………………………………………………………………………………. 1-22
PRECAUTIONS FOR WASTE DISPOSAL………………………………………………………………………………. 1-23
MAIN COMPONENTS …………………………………………………………………………………………………………….. 1-24
COMPONENTS IDENTIFICATION PLATES………………………………………………………………………………. 1-27
MACHINE …………………………………………………………………………………………………………………………… 1-27
ENGINE……………………………………………………………………………………………………………………………… 1-27
CAB …………………………………………………………………………………………………………………………………… 1-28
CE-MARK …………………………………………………………………………………………………………………………… 1-28
PUMP ………………………………………………………………………………………………………………………………… 1-29
AXLES ……………………………………………………………………………………………………………………………….. 1-29
CONTROL VALVE……………………………………………………………………………………………………………….. 1-29
DECALS………………………………………………………………………………………………………………………………… 1-30
NOISE LEVEL DECAL …………………………………………………………………………………………………………. 1-30
POSITION OF DECALS ……………………………………………………………………………………………………….. 1-31
HAND SIGNALS …………………………………………………………………………………………………………………….. 1-38
SECTION 2
CONTROLS AND INSTRUMENTS……………………………………………………………………………………………….. 2-1
SWITCHES AND PUSH-BUTTONS……………………………………………………………………………………………. 2-1
“BUZZER”: ACOUSTIC WARNING SIGNAL……………………………………………………………………………… 2-7
CONTROLS AND PEDALS ……………………………………………………………………………………………………….. 2-9
MULTI-FUNCTION DISPLAY …………………………………………………………………………………………………… 2-12
OPERATING MODE…………………………………………………………………………………………………………….. 2-18
MAIN MENU ……………………………………………………………………………………………………………………….. 2-19
CONDITIONS OF USE…………………………………………………………………………………………………………. 2-20
DISPLAY SETTING, MAIN MENU………………………………………………………………………………………….. 2-21
CONTRAST………………………………………………………………………………………………………………………… 2-22
INDEX
BRIGHTNESS …………………………………………………………………………………………………………………….. 2-23
TIME ………………………………………………………………………………………………………………………………….. 2-24
UNITS ………………………………………………………………………………………………………………………………… 2-27
SYMBOLS ………………………………………………………………………………………………………………………….. 2-29
STARTER SWITCH………………………………………………………………………………………………………………… 2-30
RADIO ………………………………………………………………………………………………………………………………….. 2-32
CAB ……………………………………………………………………………………………………………………………………… 2-33
ENTRY AND EXIT……………………………………………………………………………………………………………….. 2-33
DOOR OPENING ………………………………………………………………………………………………………………… 2-34
DOOR CLOSING…………………………………………………………………………………………………………………. 2-34
SIDE WINDOW……………………………………………………………………………………………………………………. 2-35
FRONT WINDOW………………………………………………………………………………………………………………… 2-35
EMERGENCY EXIT……………………………………………………………………………………………………………… 2-36
WINDSCREEN WIPER AND WASHER………………………………………………………………………………….. 2-37
FLOODLAMPS ……………………………………………………………………………………………………………………. 2-37
DOCUMENTS STORAGE BOX, FIRST-AID KIT, WARNING TRIANGLE AND
FIRE-EXTINGUISHER …………………………………………………………………………………………………………. 2-38
SUNBLIND………………………………………………………………………………………………………………………….. 2-38
CAB LIGHTING …………………………………………………………………………………………………………………… 2-39
AUXILIARY SOCKET …………………………………………………………………………………………………………… 2-40
STEERING COLUMN…………………………………………………………………………………………………………… 2-41
VENTILATION, HEATING AND AIR CONDITIONING (OPTIONAL)………………………………………………. 2-42
VENTILATION (air from outside) ……………………………………………………………………………………………. 2-42
HEATING……………………………………………………………………………………………………………………………. 2-44
AIR CONDITIONING (OPTIONAL)…………………………………………………………………………………………. 2-45
SERVICE AND PARKING BRAKES………………………………………………………………………………………….. 2-47
SERVICE BRAKE………………………………………………………………………………………………………………… 2-47
PARKING BRAKE ……………………………………………………………………………………………………………….. 2-48
OPERATOR’S SEAT ………………………………………………………………………………………………………………. 2-49
OPERATOR’S SEAT WITH PNEUMATIC SUSPENSION …………………………………………………………. 2-49
SEAT BELT …………………………………………………………………………………………………………………………… 2-54
SECTION 3
OPERATING THE MACHINE……………………………………………………………………………………………………….. 3-1
GENERAL INSTRUCTIONS………………………………………………………………………………………………………. 3-1
BEFORE OPERATING THE MACHINE ……………………………………………………………………………………. 3-1
OPERATING THE MACHINE………………………………………………………………………………………………….. 3-1
RUNNING-IN PERIOD …………………………………………………………………………………………………………… 3-2
AFTER DAILY OPERATION – PARKING………………………………………………………………………………….. 3-3
START-UP………………………………………………………………………………………………………………………………. 3-4
START-UP IMMOBILIZER ……………………………………………………………………………………………………… 3-4
START-UP……………………………………………………………………………………………………………………………. 3-9
ENGINE SHUT OFF …………………………………………………………………………………………………………….. 3-12
CAB AT VARIABLE HEIGHT……………………………………………………………………………………………………. 3-13
OPERATION……………………………………………………………………………………………………………………….. 3-13
EMERGENCY LOWERING…………………………………………………………………………………………………… 3-15
TRAVEL………………………………………………………………………………………………………………………………… 3-16
BEFORE STARTING THE TRAVEL……………………………………………………………………………………….. 3-16
BASIC POSITION………………………………………………………………………………………………………………… 3-16
INDEX
BASIC SETTING …………………………………………………………………………………………………………………. 3-18
TRAVEL……………………………………………………………………………………………………………………………… 3-20
GEARBOX – GEAR CHANGE ……………………………………………………………………………………………….. 3-23
TRAVEL WITH LOAD APPLIED TO CRANING HOOK……………………………………………………………… 3-25
FLOATING AXLE BLOCKING AND UNBLOCKING………………………………………………………………….. 3-26
WORKING OPERATION …………………………………………………………………………………………………………. 3-27
SAFETY INSTRUCTIONS…………………………………………………………………………………………………….. 3-27
BEFORE BEGINNING THE WORK………………………………………………………………………………………… 3-28
HOLDING AND RELEASING THE UPPER STRUCTURE SLEW ………………………………………………. 3-33
POWER BOOST FUNCTION – POWER BOOST……………………………………………………………………… 3-39
LEVELLING MODE ……………………………………………………………………………………………………………… 3-41
HYDRAULIC DAMPING ……………………………………………………………………………………………………….. 3-43
STABILIZATION OF THE MACHINE………………………………………………………………………………………. 3-45
OPERATING THE MACHINE WITH COLD WEATHER……………………………………………………………….. 3-48
COLD START – PREHEATING………………………………………………………………………………………………. 3-49
OPERATING THE MACHINE WITH HOT WEATHER …………………………………………………………………. 3-51
MACHINE RECOVERY AND TOWING……………………………………………………………………………………… 3-52
SECURE THE MACHINE ……………………………………………………………………………………………………… 3-53
WORKING ATTACHMENT………………………………………………………………………………………………………. 3-56
CLAMSHELL BUCKET OPERATION……………………………………………………………………………………… 3-57
SECTION 4
SUPPLIES AND MAINTENANCE CHART …………………………………………………………………………………….. 4-1
SUPPLIES AND MAINTENANCE CHART …………………………………………………………………………………… 4-1
FUEL……………………………………………………………………………………………………………………………………. 4-2
HYDRAULIC OIL …………………………………………………………………………………………………………………… 4-3
SAFETY INSTRUCTIONS…………………………………………………………………………………………………………. 4-5
WORKING HOURS / INTERVALS ……………………………………………………………………………………………… 4-6
MAINTENANCE INTERVALS CHART ………………………………………………………………………………………… 4-7
CHECKS BEFORE START-UP AND BEFORE EACH WORKING SHIFT (10 HOURS) …………………… 4-10
MACHINE GENERAL INSPECTION ………………………………………………………………………………………. 4-10
SERVICE BRAKE………………………………………………………………………………………………………………… 4-11
PARKING BRAKE ……………………………………………………………………………………………………………….. 4-11
UPPER STRUCTURE HOLDING BRAKE……………………………………………………………………………….. 4-12
LIGHTS………………………………………………………………………………………………………………………………. 4-12
CONTROLS AND LAMPS OPERATION…………………………………………………………………………………. 4-12
ENGINE OIL – LEVEL…………………………………………………………………………………………………………… 4-13
HYDRAULIC OIL TANK – LEVEL …………………………………………………………………………………………… 4-13
FUEL TANK – LEVEL……………………………………………………………………………………………………………. 4-15
COOLING SYSTEM LIQUID – LEVEL …………………………………………………………………………………….. 4-17
SCREEN WASHER LIQUID – LEVEL……………………………………………………………………………………… 4-19
WORKING ATTACHMENT – GREASING………………………………………………………………………………… 4-20
TYRES – PRESSURE CHECK ………………………………………………………………………………………………. 4-22
TYRES – NUTS TIGHTENING……………………………………………………………………………………………….. 4-24
WEEKLY SERVICE (50 HOURS)……………………………………………………………………………………………… 4-25
CAB AIR FILTER – CLEANING………………………………………………………………………………………………. 4-25
CAB RAISING……………………………………………………………………………………………………………………… 4-26
AIR FILTER – CLEANING……………………………………………………………………………………………………… 4-26
AIR INTAKE LINE – CHECK………………………………………………………………………………………………….. 4-28
INDEX
MULTI-COOLER – CLEANING………………………………………………………………………………………………. 4-29
FUEL SYSTEM – AIR BLEEDING AND WATER DRAINING ……………………………………………………… 4-30
SLEWING GEARBOX – OIL LEVEL ……………………………………………………………………………………….. 4-32
BATTERIES – LEVEL – CHARGE CHECK AND CLAMPS TIGHTENING…………………………………….. 4-33
SLEWING BEARING CUPS AND AXLE FLOATING PINS – GREASING…………………………………….. 4-36
MONTHLY SERVICE (250 HOURS) …………………………………………………………………………………………. 4-37
ENGINE OIL FILTER – CHANGE …………………………………………………………………………………………… 4-37
FUEL FILTER/S – CHANGE ………………………………………………………………………………………………….. 4-38
HYDRAULIC OIL RETURN FILTER – CHANGE ………………………………………………………………………. 4-39
STEERING AXLE – OIL LEVEL ……………………………………………………………………………………………… 4-40
TRAVEL GEARBOXES – OIL LEVEL ……………………………………………………………………………………… 4-41
RIGID AXLE AND GEARBOX – OIL LEVEL…………………………………………………………………………….. 4-42
AIR CONDITIONING SYSTEM ……………………………………………………………………………………………… 4-43
BLADE AND STABILIZERS JOINTS, CARDAN SHAFT, STEERING TRUNNION PINS –
GREASING…………………………………………………………………………………………………………………………. 4-44
FLOATING AXLE LOCKING CYLINDERS CONTACT FACES – LUBRICATION ………………………….. 4-45
SERVICE EVERY 12 MONTHS (500 HOURS)…………………………………………………………………………… 4-46
ENGINE REVOLUTIONS SENSOR – CLEANING ……………………………………………………………………. 4-46
DRIVE BELTS – CHECK……………………………………………………………………………………………………….. 4-47
ENGINE OIL – CHANGE……………………………………………………………………………………………………….. 4-48
SLEWING BEARING – SCREW TIGHTENING CHECK…………………………………………………………….. 4-49
SLEWING BEARING TEETH – GREASING …………………………………………………………………………….. 4-50
SLEWING GEARBOX – SCREWS TIGHTENING CHECK…………………………………………………………. 4-50
SERVICE AFTER 1000 HOURS ………………………………………………………………………………………………. 4-51
CAB AIR FILTER – CHANGE ………………………………………………………………………………………………… 4-51
WINDSCREEN BLADES – CHANGE ……………………………………………………………………………………… 4-51
ENGINE BRACKETS – SCREWS TIGHTENING CHECK………………………………………………………….. 4-52
ENGINE BELT TENSIONER – CHECK …………………………………………………………………………………… 4-52
AIR FILTER – REPLACEMENT OF MAIN FILTER ELEMENT AND OF SAFETY
ELEMENT…………………………………………………………………………………………………………………………… 4-53
HYDRAULIC SYSTEM BLEEDING VALVE – CHANGE…………………………………………………………….. 4-54
STEERING AXLE – OIL CHANGE………………………………………………………………………………………….. 4-54
RIGID AXLE AND GEARBOX – OIL CHANGE…………………………………………………………………………. 4-56
SERVICE BRAKE – PLATES CHECK …………………………………………………………………………………….. 4-58
PILOT CONTROL FILTER – CHANGE……………………………………………………………………………………. 4-59
COUNTERWEIGHT – SCREW TIGHTENING CHECK ……………………………………………………………… 4-59
AIR CONDITIONING SYSTEM – CLEANING AND OPERATION CHECK – COMPRESSOR
BELT CHANGE …………………………………………………………………………………………………………………… 4-60
SERVICE AFTER 3000 HOURS ………………………………………………………………………………………………. 4-64
HYDRAULIC OIL TANK – CLEANING AND OIL CHANGE ………………………………………………………… 4-64
HYDRAULIC SYSTEM – AIR BLEEDING………………………………………………………………………………… 4-67
ENGINE – CHECK AND ADJUSTMENT OF VALVES CLEARANCE ………………………………………….. 4-67
COOLING SYSTEM LIQUID – CHANGE…………………………………………………………………………………. 4-68
FUEL TANK – CLEANING …………………………………………………………………………………………………….. 4-69
SLEWING GEARBOX – OIL CHANGE……………………………………………………………………………………. 4-70
SERVICE WHEN NECESSARY……………………………………………………………………………………………….. 4-71
MACHINE – CLEANING………………………………………………………………………………………………………… 4-71
WINDSCREEN WIPER – CHECK AND CLEANING………………………………………………………………….. 4-73
DRIVE BELT – CHANGE ………………………………………………………………………………………………………. 4-73
INJECTORS – REPLACEMENT …………………………………………………………………………………………….. 4-74
HYDRAULIC SYSTEM AND TANK – PRESSURE RELEASE ……………………………………………………. 4-74
INDEX
TYRES – CHANGE ………………………………………………………………………………………………………………. 4-76
SERVICE BRAKE – AIR BLEEDING……………………………………………………………………………………….. 4-78
STEERING ADJUSTMENT …………………………………………………………………………………………………… 4-78
AXLE FLOATING LOCKING CYLINDERS – AIR BLEEDING……………………………………………………… 4-79
FUSES – REPLACEMENT…………………………………………………………………………………………………….. 4-80
BULBS – REPLACEMENT…………………………………………………………………………………………………….. 4-83
BATTERIES – REPLACEMENT……………………………………………………………………………………………… 4-87
CLAMSHELL – WEAR CHECK………………………………………………………………………………………………. 4-88
SECTION 5
TROUBLESHOOTING ………………………………………………………………………………………………………………… 5-1
ERRORS INDICATION ON THE DISPLAY……………………………………………………………………………….. 5-2
ENGINE ………………………………………………………………………………………………………………………………….. 5-3
STEERING SYSTEM………………………………………………………………………………………………………………… 5-6
BRAKES SYSTEM……………………………………………………………………………………………………………………. 5-7
SERVICE BRAKE………………………………………………………………………………………………………………….. 5-7
PARKING BRAKE …………………………………………………………………………………………………………………. 5-7
HYDRAULIC SYSTEM ……………………………………………………………………………………………………………… 5-8
TRAVEL………………………………………………………………………………………………………………………………… 5-10
SLEWING ……………………………………………………………………………………………………………………………… 5-11
FLOATING AXLE BLOCKING………………………………………………………………………………………………….. 5-12
STABILIZERS………………………………………………………………………………………………………………………… 5-13
CLAMSHELL BUCKET……………………………………………………………………………………………………………. 5-15
AXLES ………………………………………………………………………………………………………………………………….. 5-16
CENTRALIZED LUBRICATION PUMP ……………………………………………………………………………………… 5-18
HEATING/AIR CONDITIONING SYSTEM………………………………………………………………………………….. 5-20
SYSTEM…………………………………………………………………………………………………………………………….. 5-20
COOLING SYSTEM …………………………………………………………………………………………………………….. 5-21
BLOWER ……………………………………………………………………………………………………………………………. 5-22
SECTION 6
STORAGE …………………………………………………………………………………………………………………………………. 6-1
MACHINE STORAGE…………………………………………………………………………………………………………….. 6-1
ENGINE STORAGE ………………………………………………………………………………………………………………. 6-1
BATTERIES STORAGE …………………………………………………………………………………………………………. 6-2
RECOMMISSIONING THE MACHINE AFTER PROLONGED STORAGE…………………………………….. 6-2
DECOMMISSIONING OF THE MACHINE ………………………………………………………………………………… 6-3
SECTION 7
ATTACHMENTS…………………………………………………………………………………………………………………………. 7-1
CLAMSHELL BUCKET……………………………………………………………………………………………………………… 7-1
SAFETY INSTRUCTIONS………………………………………………………………………………………………………. 7-1
CLAMSHELL BUCKET ASSEMBLY…………………………………………………………………………………………. 7-1
CLAMSHELL BUCKET DISASSEMBLY……………………………………………………………………………………. 7-3
PARAMETERS SETTING ………………………………………………………………………………………………………. 7-4
SWITCHING OVER FROM STANDARD TO CLAMSHELL BUCKET……………………………………………. 7-4
CRANING HOOK……………………………………………………………………………………………………………………… 7-6
INDEX
SAFETY INSTRUCTIONS………………………………………………………………………………………………………. 7-6
USE OF THE CRANING HOOK………………………………………………………………………………………………. 7-6
OVERLOAD WARNING SYSTEM………………………………………………………………………………………………. 7-7
“MOZELT” MAGNET…………………………………………………………………………………………………………………. 7-9
SAFETY INSTRUCTIONS………………………………………………………………………………………………………. 7-9
SYSTEM…………………………………………………………………………………………………………………………….. 7-10
OPERATION……………………………………………………………………………………………………………………….. 7-12
DISPLAY…………………………………………………………………………………………………………………………….. 7-13
BREAK PROTECTION VALVES ………………………………………………………………………………………………. 7-16
REAR FLOODLAMPS …………………………………………………………………………………………………………….. 7-17
ROTARY LIGHT …………………………………………………………………………………………………………………….. 7-18
SINGLE LIGHT……………………………………………………………………………………………………………………. 7-18
DOUBLE LIGHT ………………………………………………………………………………………………………………….. 7-18
SWITCHING ON AND OFF …………………………………………………………………………………………………… 7-18
FUEL TRANSFER PUMP………………………………………………………………………………………………………… 7-19
CAB PROTECTIONS………………………………………………………………………………………………………………. 7-20
CENTRALIZED LUBRICATION………………………………………………………………………………………………… 7-21
SAFETY INSTRUCTIONS…………………………………………………………………………………………………….. 7-21
OPERATION……………………………………………………………………………………………………………………….. 7-21
MANUAL FILLING PUMP……………………………………………………………………………………………………… 7-24
MOTORIZED FILLING PUMP ……………………………………………………………………………………………….. 7-25
SECTION 8
DATA AND TECHNICAL SPECIFICATIONS …………………………………………………………………………………. 8-1
DIMENSIONS – OPERATING WEIGHTS…………………………………………………………………………………….. 8-1
WX 210 Industry MODELS……………………………………………………………………………………………………… 8-1
WX 240 Industry MODELS……………………………………………………………………………………………………… 8-2
DIGGING PERFORMANCE ………………………………………………………………………………………………………. 8-3
WX 210 Industry MODELS……………………………………………………………………………………………………… 8-3
WX 240 Industry MODELS……………………………………………………………………………………………………… 8-4
LIFTING CAPACITIES………………………………………………………………………………………………………………. 8-5
WX 210 Industry MODELS……………………………………………………………………………………………………… 8-5
WX 240 Industry MODELS……………………………………………………………………………………………………… 8-6
HYDRAULIC SYSTEM ……………………………………………………………………………………………………………… 8-7
PUMPS………………………………………………………………………………………………………………………………… 8-7
CYLINDERS (ø for stroke)………………………………………………………………………………………………………. 8-7
SLEWING ……………………………………………………………………………………………………………………………….. 8-7
TRAVEL………………………………………………………………………………………………………………………………….. 8-7
TYRES…………………………………………………………………………………………………………………………………. 8-8
BRAKES …………………………………………………………………………………………………………………………………. 8-8
STEERING………………………………………………………………………………………………………………………………. 8-8
POWER STEERING………………………………………………………………………………………………………………. 8-8
ELECTRICAL SYSTEM…………………………………………………………………………………………………………….. 8-9
TIGHTENING TORQUES………………………………………………………………………………………………………….. 8-9
INDEX
CENTRALIZED LUBRICATION PUMP (OPTIONAL)…………………………………………………………………….. 8-9
FUEL SYSTEM………………………………………………………………………………………………………………………… 8-9
ENGINE ………………………………………………………………………………………………………………………………… 8-10
SECTION 9
ALPHABETICAL INDEX……………………………………………………………………………………………………………… 9-1

IMAGES PREVIEW OF THE MANUAL:

CASE WX210 & WX240 INDUSTRY TIER 3 WHEELED HYDRAULIC EXCAVATORS OPERATOR’S MANUAL 87618263 – PDF DOWNLOAD:

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.V