Cat BUCYRUS 2810-2 continuous miner Parts Manual – PDF DOWNLOAD

Description

Cat BUCYRUS 2810-2 continuous miner Parts Manual – PDF DOWNLOAD

FILE DETAILS:

Cat BUCYRUS 2810-2 continuous miner Parts Manual – PDF DOWNLOAD

Language :English
Pages :368
Downloadable : Yes
File Type : PDF

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Cat BUCYRUS 2810-2 continuous miner Parts Manual – PDF DOWNLOAD

SAFETY PRECAUTIONS

• The machine should not be operated until the operator .has read and understood the operating instructions for the machine and is thoroughly familiar with the location, operation and functions of all controls. . An operator should not· operate the machine without all covers and/or guards properly mounted and secured.
• The operator should familiarize himself with the fire suppression system of the machine. 4. Always ,be sure all personnel are clear of machine before starting machine. 5. 6. 7. 8. 9. 10. 11. Carefully test all functions before operating the machi!1e.’ ‘ Always wear safety glasses not oQly for your own safety but for that of your fellow workers.
• Should an operator be temporarily blinded by dust, etc., while operating the machine, the machine becomes a hazard to both men and other equipment. When operating the machine, always keep ail parts of your body within the confmes of the operator’s pit. Hanging bead, arms or legs outside the pit could result in severe injury or death. Take extra caution to keep from cutting the trailing cable against the rib or under the track.
• Any damaged, broken or malfunctioning parts should be reported at once to the section foreman. A pennissible·electrical enclosure should never be opened by anyone except properly trained maintenance personnel. The operator should never try to troubleshoot the cause of a circuit breaker trip, whether the breaker is on the machine or at the power center. Notify proper maintenance personnel to detennine the cause and correct. 12. Never work under a raised cutter boom, ,conveyor boom or gathering head unless they are properly supported.

TABLE OF CONTENTS:

Cat BUCYRUS 2810-2 continuous miner Parts Manual – PDF DOWNLOAD

GENERAL · 1-0
CONTROL CIRCUITS 2-0
INSTANTANEOUS OVERLOADS 1-1
CONTROL SCHEMATIC , 2-1
THEIU1AL OVERLOAD ‘ , 1-2
CONTROL LEGEND 2-2
INSTALLATION OF CO-A X CONNECTOR , 1-3
GENERAL IN FORJVIATION 2-3
TIMERS 1 ,4
CONTROL CIRCUIT ALL CIRCUIT BREAKERS ON 2-5
VACUUM CONTACTOR SIZE 5 1-5
CONTROL CIRCUIT ILLUSTRATION ~ 2 ,6
VACUUM CONT ACTOR SIZE 3 ~ , 1-6
PUI\1P MOTOR CONTROL CIRCUIT 2-7
DPC CONTACTOR SIZE 3 ; : 1-7
PUJ\1P MOTOR CONTROL ILLllSTRA TION ” 2-8
OPC CONTACTOR TROUBLESHOOTING CHART : ~ I-9
CONTROL CIRCUIT WlTH PUMP RUNNING 2-9
RADIO I MANUAL SWITCII 1-11
CONTROL CIRCUIT WITH PUJ\1P RUNNING ILLUSTRATION 2-10
SWITCH ILLUSTRATION 1-12
CUTTER MOTOR CONTROL CIRCUIT 2-11
LOW OIL CIRCUIT , • 1-13
CUTTER MOTOR CONTROL CIRCUIT ILLUSTRATION 2-12
LOW OIL CIRCUIT ILLUSTRATION 1-14
CONVEYOR MOTOR FORWARD CONTROL CIRCUIT : 2-13
HEADLIGHT CIRCUIT 1-15 ‘
CONVEYORMOTOR FORWARD CONTROL CIRCUIT ILLUSTRATION 2-14
HEADLIGHT CIRCUIT ILLUSTRATION ~ · 1-16
CONVEYOR MOTOR REVERSE CONTROL CIRCUIT 2-15
METHANE MONITOR CIRCUIT 1-17
CONVEYOR MOTOR REVERSE CONTROL CIRCUIT ILLUSTRATION 2-16
METHANE MONITOR CIRCUIT ILLUSTRATION ; 1-18
SCRUBBER MOTOR CONTROL CIRCUIT 2-17
MAIN· CONTROL CASE 1-19
SCRUBBER MOTOR CONTROL CIRCUIT ILLUSTRATION ~ 2-18
MAIN CONTROL CASE SWING PANEL FRONT VIEW 1-20
RIGHT FORWARD TRAM CONTROL CIRCUIT , ” , 2-19
MAIN CONTROL CASE SWING PANEL REAR VIEW ; 1-21
RIGHT FORWARD TRAM CONTROL CIRCUIT ILLUSTRATION 2-20
MAIN CONTROL CAS’E REAR WALL COMPONENTS 1-22
RIGHT REVERSE TRAM ‘CONTROL CIRCUIT : 2-21
OPERATORS CONTROL CASE ” ; 1-23
RlGHTREVERSE TRAM CONTROL CIRCUIT ILLUSTRATION ” 2-22
OPERATORS CONTROL CASE REAR WALL COMPONENTS 1-24
LEFT FOR WARD TRAM CONTROL CIRCUIT 2-23
OPERATORS CONTROL CASE CIRCUIT BREAKER MOUNTING 1-25
LEFT FORWARD TRAM CONTROL CIRCUIT ILLUSTRATION 2-24
OPERATORS CONTROL CASE SWITCH PANEL ~ : 1-26
LEFr REVERSE TRAM CONTROL CIRCUIT ; 2-25
TRACTION CASE ~ 1-27
LEFT REVERSE TRAM CONTROL C1RCU1T ILLUSTRATION 2-26
TRACTION CASE COMPONENT8 1-28
TRACTION CASE WIRING DIAGRAM; ~ 1-29

S.M 25/3/2025