CAT BUCYRUS 49HR BLAST HOLE DRILL OPERATOR’S MANUAL SN 141239 – PDF DOWNLOAD

Description

CAT BUCYRUS 49HR BLAST HOLE DRILL OPERATOR’S MANUAL SN 141239 – PDF DOWNLOAD

FILE DETAILS:

CAT BUCYRUS 49HR BLAST HOLE DRILL OPERATOR’S MANUAL SN 141239 – PDF DOWNLOAD

Language : English
Pages :122
Downloadable : Yes
File Type : PDF

DESCRIPTION:

CAT BUCYRUS 49HR BLAST HOLE DRILL OPERATOR’S MANUAL SN 141239 – PDF DOWNLOAD

GENERAL INFORMATION

• This manual is designed to assist the owner in the operation and maintenance of this machine. By following easy to understand step-by-step procedures the operators and maintenance personnel can perform all tasks in a safe manner. When a systematic and thorough maintenance/service procedure is used for this machine, a minimum of unplanned downtime and more reliable operation will result.
• THIS MANUAL IS NOT THE PARTS BOOK, and cannot be used as reference material to order parts. A separate, detailed parts book has been supplied. Please carefully read the instructions in it. All parts are listed by group and/or product code numbers with the associated item/part numbers for THIS SPECIFIC MACHINE. Order parts in the exact quantity needed. RIGHT and LEFT refer to machine locations as viewed by the operator sitting in the operator’s seat in the cab.
• Please state the correct machine SERIAL NUMBER when corresponding or contacting the factory service or parts departments. Records on each machine are filed by serial number and when given this number, your machine’s specific design and original equipment is accessed quickly by the Bucyrus International parts representative. Periodic additions or revisions may be made to this manual.
• These can be ordered and will be mailed directly from the factory. Should you require additional information or factory service assistance contact your regional service representative or:

Bucyrus International, Inc.
1100 Milwaukee Avenue
P.O. Box 500
South Milwaukee, Wisconsin, USA 53172-0500
Telephone (414)-768-4000

• It is Bucyrus International’s policy to improve its products whenever possible and practical to do so. The company reserves the right to make changes or add improvements to its machines at any time. This will be without incurred obligations to install such changes on machines sold previously.
• Due to this ongoing program of product research and development some procedures, specifications and parts may be altered in a constant effort to improve our machines

IMAGES PREVIEW OF THE MANUAL:

TABLE OF CONTENTS:

CAT BUCYRUS 49HR BLAST HOLE DRILL OPERATOR’S MANUAL SN 141239 – PDF DOWNLOAD

GENERAL INFORMATION 5
SAFETY 6
SAFETY PRECAUTIONS 7
FIRE PREVENTION CONSIDERATIONS 10
STANDARD HAND SIGNALS FOR CONTROLLING CRANE OPERATIONS 11
WARNING SIGNS AND DECALS 14
Stored Energy Signs 15
OPERATION NEAR ELECTRICAL LINES 16
MACHINE OVERVIEW 17
PROPEL MACHINERY 18
MAIN FRAME AND DECKS 19
MACHINERY HOUSE 20
MAIN AIR SYSTEMS 21
Air Compressor 21
HYDRAULIC SYSTEM 22
OPERATOR’S CAB 23
Mast/Machinery 24
ROTARY GEARCASE 25
PULLDOWN GEARCASE 26
DRILL TOOL STRING ASSEMBLY 27
BREAKOUT WRENCH 28
CABLE REEL 28
CONTROLS – LOCATION AND FUNCTION 29
OPERATOR’S CONTROL CONSOLE 30
OPERATOR’S CONTROL CONSOLE – OVERVIEW 30
MAIN CONTROL PANEL 31
MAIN CONTROL PANEL – OVERVIEW 31
HOIST/PULLDOWN RHEOSTAT 31
ROTARY RHEOSTAT 32
DRILL/PROPEL CONTROLS ON AND OFF PUSH-BUTTON 32
HOIST/PULLDOWN SPEED SELECTOR SWITCH 33
ROTARY SPEED SELECTOR SWITCH 33
HOIST BRAKE SWITCH 34
PIPE RACK SELECTOR SWITCH 34
PIPE RACK JOYSTICK (LEFT CRAWLER PROPEL) 34
WINCH/MAST SELECTOR SWITCH 35
MAST/WINCH JOYSTICK (RIGHT CRAWLER PROPEL) 35
TOOL WRENCH SWITCH 36
DUST CURTAIN SWITCH 36
BIT VIEW HATCH SWITCH 36
PROPEL CONTROL PANEL 37
PROPEL CONTROL PANEL – OVERVIEW 37
EMERGENCY STOP PUSH-BUTTON (OPTIONAL) 37
PROPEL SPEED SELECTOR SWITCH 38
COMPRESSOR STOP PUSH-BUTTON 38
COMPRESSOR VENT/DRILL SWITCH 38
HEATER/VENT/AIR CONDITIONER CONTROLS 38
OPERATING MODE SELECTOR SWITCH 38
PROPEL JOYSTICKS 39
SELECTOR SWITCH PANEL 39
SELECTOR SWITCH PANEL – OVERVIEW 39
BREAKOUT WRENCH SWITCH 40
PIPE POSITIONER SWITCH (OPTIONAL) 40
DUST SEAL SWITCH (OPTIONAL) 40
A-FRAME LOCK SWITCH (OPTIONAL) 40
MAST BRACE LOCK SWITCH 40
MAST LOCK SWITCH 41
BOARDING STAIRS SWITCH 41
PEDESTAL HEATER SWITCH (OPTIONAL) 41
FIRE SUPPRESSION SYSTEM INDICATORS (OPTIONAL) 41
RADIO 41
LEVELING CONTROL PANEL 42
LEVELING CONTROL PANEL 42
MANUAL LEVELING JOYSTICKS 43
AUTOMATIC LEVELING SWITCH 43
WATER INJECTION ON/OFF SWITCH (OPTIONAL) 43
WATER INJECTION FLOW CONTROL (OPTIONAL) 43
HORN PUSH-BUTTON 44
DEPTH INDICATOR RESET PUSH-BUTTON 44
PROGRAMMED DRILL CONTROL SWITCH 44
EMERGENCY STOP PUSH-BUTTON (OPTIONAL) 44
OPERATOR’S DISPLAY PANEL 45
MACHINERY HOUSE CONTROLS 46
LIGHTING LOAD CENTER 46
LIGHTING LOAD CENTER 46
CONTROLS LOCATED ON LOW VOLTAGE START CABINET 47
TYPICAL LOW VOLTAGE START CABINET 47
CONTROLS LOCATED ON LOW VOLTAGE CABINET 47
TYPICAL LOW VOLTAGE CABINET 47
CONTROL LOCATED ON PROGRAMMABLE CONTROLLER CABINET 48
TYPICAL PROGRAMMABLE CONTROL CABINET 48
HOIST/PULLDOWN AND ROTARY DRIVE CONTROL CABINETS 48
TYPICAL HOIST/PULLDOWN AND ROTARY DRIVE CONTROL CABINETS 48
MISCELLANEOUS CONTROLS 49
HYDRAULIC RESERVOIR REMOTE FILL CONTROL PANEL 49
HYDRAULIC RESERVOIR REMOTE FILL CONTROL PANEL 49
LUBE CONTROL PANEL 49
LUBE CONTROL PANEL 49
PRESTART CHECKS 50
EXTERNAL INSPECTION 50
ONBOARD INSPECTION 52
PRESTART LUBRICATION 54
START-UP 55
MACHINE START UP 55
MACHINERY CHECK 56
BREAK-IN OF NEW COMPONENTS 56
ROTARY DRIVE UNIT BREAK-IN 56
HOIST/PULLDOWN GEARCASE BREAK-IN 56
ELECTRIC MOTOR BREAK-IN 56
OPERATION 57
PROPELLING 57
DEFINITIONS 57
PROPEL PROCEDURE 58
PROPEL CONTROLS – OVERVIEW 59
STRAIGHT PROPEL 60
GRADUAL RIGHT HAND TURN 60
GRADUAL LEFT HAND TURN 61
COUNTER-ROTATION LEFT HAND TURN 62
ENSURE GRADUAL TURNS ARE MADE – 15O INCREMENTS 62
TOWING PROCEDURE 64
TOWING PROCEDURE 64
CABLE REEL OPERATION 66
CABLE REEL 66
LEVELING 67
MACHINE ORIENTATION 67
LEVELING CONTROLS 68
MAST RAISING AND LOWERING 69
MAST RAISING 69
MAST RAISING/LOWERING CONTROLS 70
MAST LOWERING 71
MAST CONTROLS TO ADJUST FOR ANGLE DRILLING 71
PULLDOWN MACHINERY OPERATION 73
HOIST/PULLDOWN CONTROLS 73
AUXILIARY WINCH OPERATION 74
WINCH OPERATION CONTROLS 74
PIPE RACK OPERATION 75
PIPE RACK OPERATING CONTROLS 75
PIPE RACK OPERATION 76
TOOL HANDLING 78
PIPE LOADING AND UNLOADING 78
DRILL TOOL STRING ASSEMBLY 80
TOOL STRING 80
STABILIZER INSTALLATION 81
DRILL PIPE INSTALLATION CONTROLS 81
BREAKOUT WRENCH OPERATION 85
DRILL TOOL STRING DISASSEMBLY 86
ADDING ADDITIONAL DRILL PIPE 88
REMOVAL OF MULTIPLE SECTION DRILL PIPE 89
DUST SUPPRESSION SYSTEM OPERATION 90
Dust Curtain Enclosure 90
WATER INJECTION SYSTEM 91
DRILLING 92
VERTICAL DRILLING 92
CONTROLS UTILIZED WHILE DRILLING 92
STARTING THE HOLE (COLLARING) 93
NORMAL DRILLING 95
ENDING THE HOLE 96
ENDING THE HOLE (MULTIPLE PIPE SECTIONS) 97
DRILLING DIFFICULT FORMATIONS 97
UNCONSOLIDATED MATERIALS 98
WET OR STICKY FORMATIONS 100
PROGRAMMED DRILL CONTROL DRILLING 102
PROGRAMMED DRILL CONTROLS UTILIZED 102
PREPARING TO MOVE 103
MACHINE SHUTDOWN 105
SHUT DOWN PROCEDURE 105
SHORT TERM STORAGE 106
LONG TERM STORAGE 107
ATTENDED LONG TERM STORAGE 108
UNATTENDED LONG TERM STORAGE 108
TOOL RECOVERY 109
DRILL STABILITY CHART 111
TYPICAL MACHINE SPECIFICATIONS 113
GENERAL ESTIMATED COMPONENT WEIGHTS 115

Need help? Contact: [email protected]

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted

S.M