Cat Bucyrus Dresser 7250 Dragline Operator Manual BI006323 – PDF DOWNLOAD

Description

Cat Bucyrus Dresser 7250 Dragline Operator Manual BI006323 – PDF DOWNLOAD

FILE DETAILS:

Cat Bucyrus Dresser 7250 Dragline Operator Manual BI006323 – PDF DOWNLOAD

Language : English
Pages : 95
Downloadable : Yes
File Type : PDF

DESCRIPTION:

Cat Bucyrus Dresser 7250 Dragline Operator Manual BI006323 – PDF DOWNLOAD

INTRODUCTION:
GENERAL INFORMATION:

This manual is a reference guide for the new operator and a review guide for the experienced
operator. Basic operating procedures are described. Skills and techniques will develop as the
operator gains knowledge of the machine, its capabilities, and its limitations. All
references to RIGHT and LEFT are made from the position of the operator in his seat facing the
front of machine (boom end). Your safety, and the safety of others, depends upon
your knowledge and care in the operation of this machine.

Before doing any work on the machine, lock out or remove electric power supply from the machine
and tag it so personnel are aware that someone is working on the machine.

• Check all wire ropes for telltale signs of early wear or failure. Look for and secure any loose
  bolts or locking devices.
• Keep hands, feet, clothing away from rotating parts.
• Operate machine on level ground and be continuously aware of swing clearance. Never hold
  a load longer than needed in the dump cycle. Use sw­ ing brakes only when machine is stopped.
• Think before you act. Carelessness is one luxury the operator cannot af­ ford.
• Excessive or repeated skin contact with sealants or solvents may cause skin irritation.
  In case of skin contact, remove sealant or solvent promptly by washing with soap and water.
• Equipment should be parked on level ground and out of harms way during periods of extended
  idleness.
• Floors, walkways, and stairways must be kept clean and dry.

TABLE OF CONTENTS:

Cat Bucyrus Dresser 7250 Dragline Operator Manual BI006323 – PDF DOWNLOAD

SECTION 1 – INTRODUCTION
SECTION 2 – GENERAL DESCRIPTION
SECTION 3 – MARION PROGRAMMABLE SYSTEM
SECTION 4 – START UP PROCEDURE a – SECTION 5 – SPECIAL PROCEDURES
SECTION 6 – TYPICAL DIGGING CYCLE
SECTION 7 – TYPICAL WALKING CYCLE
SECTION 8 – SHUT DOWN PROCEDURE

1 INTRODUCTION
• SAFETY PRECAUTIONS 1-1 – • SPECIFICATION 1-4
• FEATURES 1-5
• DECK PLAN 1-6 – 2 GENERAL DESCRIPTION
• OPERATOR CAB 2-1 – • OPERATOR SEAT ADJUSTMENT 2-2
• RIGHT CONTROL CONSOLE 2-2
• LEFT CONTROL CONSOLE 2-3 – • CONTROLLER DESCRIPTION 2-5
3 MARION PROGRAMMABLE SYSTEM – • ANNUNCIATOR CODE 3-1
• ANNUNCIATOR ALARMS 3-3
• OPERATOR RESPONSES 3-7 –
4 START UP PROCEDURES
• PRE START INSPECTION 4-1
•STARTUP 4-2
5 SPECIAL PROCEDURES – • ENGINE ALTERNATOR PARALLEL PROCEDURE 5-1
• EMERGENCY RUN PROCEDURE 5-2
• LIMIT CONDITIONS RESET PROCEDURE 5-3 …
6 TYPICAL DIGGING CYCLE – 7 TYPICAL WALKING CYCLE
• PROPELLING PROCEDURE 7-1
• RAMPING OF MACHINE 7-4
8 SHUTDOWN PROCEDURES – • CONTROLLED SHUTDOWN 8-1
• EMERGENCY SHUTDOWN 8-2
• POWER SHUTDOWN 8-3

IMAGES PREVIEW OF THE MANUAL:

Need help? Contact: [email protected]

https://vimeo.com/870999856?share=copy

PLEASE NOTE:

• This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
• This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
• Require some other service manual or have any queries: please WRITE to us at [email protected]

S.V