Cat Bucyrus Dresser M-4 Drill Operator & Maintenance Manual BI006269 PDF

Description

Cat Bucyrus Dresser M-4 Blast Hole Drill Maintenance & Operation Manual BI006269 – PDF DOWNLOAD

FILE DETAILS:

Cat Bucyrus Dresser M-4 Blast Hole Drill Maintenance & Operation Manual BI006269 – PDF DOWNLOAD

Language : English
Pages : 455
Downloadable : Yes
File Type : PDF

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Cat Bucyrus Dresser M-4 Blast Hole Drill Maintenance & Operation Manual BI006269 – PDF DOWNLOAD

INTRODUCTION:
GENERAL INFORMATION:

• This manual is designed to assist the owner in the operation and preventive maintenance of
  this machine. Following easy to understand step-by-step procedures, maintenance personnel can
  perform these tasks in a safe manner. When a systematic and thorough maintenance/
  service procedure (a responsibility of the maintenance superintendent) is used for
  this machine, minimum unplanned downtime and reliable operation will result.
• THIS MANUAL IS NOT THE PARTS BOOK, and cannot be used to order parts. A sepa­ rate,
  detailed parts book has been supplied. Please carefully read the instructions in it. All
  parts are listed by group and/or product code numbers with item/part numbers for THIS
  SPECIFIC MACHINE. Order parts in exact quantity. Parts ordered by mistake and return­ ed,
  are subject to a rehandling charge. RIGHT and LEFT HAND PARTS on the upper frame correspond to
  the operator’s hands at the controls; as seated when operating the machine. Please state
  the correct machine SERIAL NUMBER (located on a plate in the operator’s cab) when
  corresponding or contacting factory service or parts departments. Records on each machine
  are filed by serial number and when given this number, your machine’s spe­ cific design
  and original equipment is accessed quickly by the Dresser parts representative.

SAFETY PRECAUTIONS :

• The operator must be alert, physically fit, and free from the influence of alcohol, drugs,
  or medications that might effect his eyesight, hearing or reactions.
• Safety must always be the operator’s most important concern. He must refuse to
  operate when he knows it is unsafe, and consult his supervisor when safety is in doubt.
• The owner and/or operator must replace any and al I safety and warning product graphics if
  they are defaced or removed from the machine.
• Before doing any work on the machine, lock out or remove electric power supply from the
  machine and tag it so personnel are aware that someone is working on the machine.
• Do not start an engine indoors unless adequate exhaust ventilators are provided. Once
  an engine is running, move the machine outdoors as soon as possible.
• Keep hands, feet, clothing away from rotating parts.
• Read carefully this manual, the parts book and manuals provided.
• Think before you act. Carelessness is one luxury the serviceman cannot afford.
• Do not wear rings, wrist watches or loose fitting clothing when working on machinery.
  They could catch on moving parts causing serious injury. Never adjust and/or service
  a machine in bare feet, sandals or sneakers.
• Always wear safety glasses when using a hammer, chisel or other tools that may cause chips
  to fly.
• Excessive or repeated skin contact with sealants or solvents may cause skin
  irritation. In case of skin contact, remove sealant or solvent promptly by washing
  with soap and water.
• Always use a safety bar to block air or hydraulic operated cylinders. Never rely on
  the machine air or hydrau lie systems to hold when working on machines. An air or
  hydraulic line or cylinder could fail or someone could accidently strike the control levers
  causing the equipment to fall.
• Equipment must be level on ground at all times during machine servicing and periods
  of idleness.

Cranes and hoists must be of sufficient capacity to lift the heavier components (gear
cases, dipper/bucket, boom, etc.) and have an ample safety margin

TABLE OF CONTENTS:

Cat Bucyrus Dresser M-4 Blast Hole Drill Maintenance & Operation Manual BI006269 – PDF DOWNLOAD

SECTION 1 – INTRODUCTION
SECTION 2 – OPERATION
SECTION 3 – MECHANICAL ADJUSTMENT
SECTION 4 – HYDRAULIC SYSTEMS
SECTION 5 – DRILL AIR SYSTEMS
SECTION 6 – AUXILIARY AIR SYSTEM
SECTION 7 – LUBRICATION
SECTION 8 – ENGINEERING DATA
SECTION 9 – ELECTRICAL
SECTION 10 – INSPECTION REPORTS

Customer Support: [email protected]

PLEASE NOTE:

• This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
• This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
• Require some other service manual or have any queries: please WRITE to us at [email protected]

S.V