Cat Feeder Breaker 7MFBM-48A-DD Operation Manual – PDF DOWNLOAD
DESCRIPTION:
Cat Feeder Breaker 7MFBM-48A-DD Operation Manual – PDF DOWNLOAD
- This manual is intended to provide GENERAL product information for the Model 7MFBM-48A-DD Feeder Breaker. The illustrations, descriptions and procedures contained in this publication apply only to this unit. DBT America reserves the right to revise models and designs without prior notice.
- This Feeder Breaker was manufactured under the guidelines, procedures and requirements of the U. S. Federal Coal Mine Health and Safety Act, Code of Federal Regulations, Title 30, Chapter 1, Subpart 0, Part 75 for underground coal mines, and other applicable non-U.S. regulatory agency standards.
- At the completion of the manufacturing process, this unit was issued the appropriate approval numbers and nameplates indicating it met the technical requirements of these regulatory agencies. Any change to the design or structure of this unit, without the consent of DBT America, and these regulatory agencies, or any repair or replacement of parts contrary to DBT America’s instructions, may invalidate these approvals and render this unit unsafe to operate.
- Strict compliance with all Federal and State Mining laws, regulations and practices regarding the safe operation and maintenance of underground mining equipment and strict adherence to the instructions in this manual is necessary for the personal safety of those working on or around this system.
- While this manual attempts to anticipate the most important operations and maintenance needs for this unit, unforeseen circumstances may arise that have not been addressed in this manual. If any concerns or questions arise, please contact your DBT America Service Representative immediately.
- This work contains information protected under trade secret and other intellectual property laws, and is protected under the U. S. Copyright Act of 1976, as amended.
- This work is provided under license and the license is non-transferable. Distribution and access is limited only to authorized personnel. Disclosure, reproduction, distribution or unauthorized use may be a violation of federal and state laws and may subject the unauthorized user to criminal liability.
TABLE OF CONTENTS:
Cat Feeder Breaker 7MFBM-48A-DD Operation Manual – PDF DOWNLOAD
1. About this manual
About this manual ………………………………………………… 1.3
Before starting to work………………………………………………………..1.3
Who is this operating manual intended for?…………………………1.3
What is the purpose of this operating manual? ……………………1.4
Characters and symbols used……………………………………………..1.5
Your safety…………………………………………………………… 2.3
Personnel……………………………………………………………………………2.4
Operation ………………………………………………………………………….2.4
Installation and repair …………………………………………………………2.4
Operating conditions…………………………………………………………..2.5
Intended use ……………………………………………………………………..2.5
Unauthorized use……………………………………………………………….2.5
Safety instructions………………………………………………………………2.6
General rules: ……………………………………………………………………2.6
Storage and transport …………………………………………………………2.8
Installation and start-up ………………………………………………………2.8
Operation ………………………………………………………………………….2.9
Maintenance and repair ………………………………………………………2.9
Overview of the safety instructions ……………………………………2.14
Chapter 3: Storage and transport ……………………………………….2.14
Chapter 4: Installation……………………………………………………….2.14
Chapter 5: Operation ………………………………………………………..2.16
Chapter 6: Technical data………………………………………………….2.20
3. Storage and transport
Storage and transport …………………………………………… 3.3
Storage……………………………………………………………………………….3.3
Storage of the machine and spare parts ……………………………….3.3
Transport ……………………………………………………………………………3.4
Load units; dimensions and weights……………………………………..3.4
Before transport …………………………………………………………………3.5
BI000803
Table of Contents
Model 7MFBM-48A-DD Feeder Breaker
4. Installation
Installation……………………………………………………………. 4.3
Points to observe prior to installation…………………………………. 4.3
Who is allowed to carry out installation? ………………………………. 4.3
Which tools are required for installation? ……………………………… 4.3
Notes on installation ………………………………………………………….. 4.4
Pre-installation check list……………………………………………………. 4.5
Safety features …………………………………………………………………. 4.6
Overview of the feeder breaker…………………………………………… 4.8
Operation……………………………………………………………… 5.3
How to operate the feeder breaker ……………………………………… 5.3
Who is allowed to operate the feeder breaker? …………………….. 5.3
When can conveying be started?………………………………………… 5.3
Controls and indicators ……………………………………………………… 5.4
Operator’s station ……………………………………………………………… 5.4
Primary valve banks ………………………………………………………….. 5.5
Pressure gauge bank ………………………………………………………… 5.7
Panic bar …………………………………………………………………………. 5.7
Fire suppression actuator (s) ……………………………………………… 5.8
Control console ………………………………………………………………… 5.9
Radio transmitter …………………………………………………………….. 5.15
Infra-red transmitter…………………………………………………………. 5.18
Starter enclosure …………………………………………………………….. 5.20
Tail piece valve bank controls (Optional) ……………………………. 5.21
Fire suppression………………………………………………………………. 5.23
Daily starting procedure …………………………………………………… 5.25
Start tram and breaker motor ……………………………………………. 5.27
Tramming the machine…………………………………………………….. 5.29
Stop tram and breaker motor ……………………………………………. 5.31
Start conveyor motor in forward direction …………………………… 5.33
Speed control of the conveyor ………………………………………….. 5.35
Stop conveyor motor in the forward direction ……………………… 5.36
Start conveyor motor in reverse direction …………………………… 5.38
Stop conveyor motor in the reverse direction ……………………… 5.40
Input and output LED (s) on the PLC…………………………………. 5.42
Electrical system ………………………………………………………………5.45
Starter enclosure …………………………………………………………….. 5.48
Control console ………………………………………………………………. 5.50
Variable frequency drive enclosure……………………………………. 5.51
Electric motors………………………………………………………………… 5.52
Emergency pull cord switch ……………………………………………… 5.53
Infra-red transmitter (Optional)………………………………………….. 5.53
Radio transmitter (optional)………………………………………………. 5.54
Hydraulic system ………………………………………………………………5.55
Oil tank……………………………………………………………………………5.59
Pump………………………………………………………………………………5.60
Primary valve banks …………………………………………………………5.60
Tilt hydraulic cylinders ………………………………………………………5.61
Lift hydraulic cylinders ………………………………………………………5.61
Tram motors…………………………………………………………………….5.62
Hand pump ……………………………………………………………………..5.62
Pressure gauges………………………………………………………………5.63
Heat exchanger ……………………………………………………………….5.63
Pressure filter (s) ……………………………………………………………..5.64
Return filter ……………………………………………………………………..5.64
Hand pump filter ………………………………………………………………5.64
Tail assembly valve bank (optional) ……………………………………5.65
Tail pulley hydraulic cylinder (s)………………………………………….5.65
Roof anchor hydraulic cylinder (s) ………………………………………5.66
Mechanical assemblies ……………………………………………………..5.67
Breaker assembly …………………………………………………………….5.67
Crawler assemblies ………………………………………………………….5.68
Tail shaft …………………………………………………………………………5.69
Head shaft……………………………………………………………………….5.70
Conveyor chain………………………………………………………………..5.71
Breaker power unit……………………………………………………………5.72
Conveyor power unit…………………………………………………………5.73
Tail assembly (optional)…………………………………………………….5.74
Roof anchor assembly (optional)………………………………………..5.74
Instructions on the maintenance of the feeder breaker……….5.75
Important notes………………………………………………………………..5.75
Before maintenance………………………………………………………….5.75
Lubrication and inspection …………………………………………………5.77
Every 8 hours of operation ……………………………………………..5.81
Weekly…………………………………………………………………………5.86
Every (3) months …………………………………………………………..5.89
Every (6) months or 2500 hours………………………………………5.91
Inspection of the feeder breaker………………………………………5.97
Instructions on the adjustment procedures…………………………5.105
Conveyor chain adjustment…………………………………………..5.105
Crawler track ………………………………………………………………5.107
Instructions on the replacement of wear parts…………………….5.109
Head shaft ………………………………………………………………….5.109
Head shaft sprockets……………………………………………………5.112
Tail shaft …………………………………………………………………….5.114
Conveyor chain……………………………………………………………5.119
Crawler track ………………………………………………………………5.123
Crawler assembly ………………………………………………………..5.126
Breaker assembly………………………………………………………..5.134
Breaker power unit ………………………………………………………5.143
Conveyor power unit…………………………………………………….5.154
Components of the feeder breaker……………………………………… 6.3
Technical data sheet …………………………………………………………. 6.3
Tightening torques …………………………………………………………….. 6.7
Permissible media ……………………………………………………………. 6.13
Lubrication fluids and greases ………………………………………….. 6.13
7. For your information
For your information……………………………………………… 7.3
Our service………………………………………………………………………… 7.3
Service address………………………………………………………………… 7.3
Rebuild facility address ……………………………………………………… 7.4
VIDEO PREVIEW OF THE MANUAL:
IMAGES PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
- This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
- Require some other service manual or have any queries: please WRITE to us at [email protected]
S.M