Caterpillar 226B Skid Steer Loader Operation & Maintenance Manual
FILE DETAILS:
Caterpillar 226B Skid Steer Loader Operation & Maintenance Manual
Language: English
Size: 5.73 MB
Pages: 331
Format: PDF
Downloadable: YES
DESCRIPTION:
Caterpillar 226B Skid Steer Loader Operation & Maintenance Manual
FOREWORD:
Literature Information:
This manual should be stored in the operator’s compartment in the literature holder or seat back literature storage area. This manual contains safety information, operation instructions, transportation information, lubrication information and maintenance information. The information contained in the section entitled “Pipelayer Attachment Kit” of this manual is limited to the pipelayer attachment and specific modifications made to the tractor unit. Refer to the section entitled “D6T LGP (OEM)” for complete information regarding the tractor unit.
- Some photographs or illustrations in this publication show details or attachments that can be different from your machine. Guards and covers might have been removed for illustrative purposes. Continuing improvement and advancement of product design might have caused changes to your machine which are not included in this publication.
- Read, study and keep this manual with the machine. Whenever a question arises regarding your machine, or this publication, please consult PipeLine Machinery International for the latest available information.
TABLE OF CONTENTS:
Caterpillar 226B Skid Steer Loader Operation & Maintenance Manual
Foreword
Foreword
Safety Section
Safety Messages
General Hazard Information
Crushing Prevention and Cutting Prevention
Burn Prevention
Fire Prevention and Explosion Prevention
Fire Extinguisher Location0
Electrical Storm Injury Prevention
Visibility Information
Engine Starting
Before Operation
Operation
Work Tools
Parking
Slope Operation0
Equipment Lowering with Engine Stopped
Sound Information and Vibration Information
Guards – Operator Protection
Product Information Section
Rated Load
Specifications
Plate Locations and Film Locations
Emissions Certification Film
Operation Section
Mounting and Dismounting
Daily Inspection_
Alternate Exit
Seat Belt_0
Operator Controls0
Alert Indicators
Engine Starting
Operation Information
Work Tool Coupler Operation
Material Handling Arm Operation0
Pallet Forks Operation
Work Tool Operation0
Stopping the Engine
Stopping the Engine if an Electrical Malfunction Occurs
Equipment Lowering with Engine Stopped
Machine Storage Procedure_
Shipping the Machine
Roading the Machine
Lifting and Tying Down the Machine
Towing the Machine_
Engine Starting with Jump Start Cables
Maintenance Section
Access Doors and Covers
Cab Tilting0
Loader Lift Arm Brace Operation
Radiator Tilting00
Lubricant Viscosities_0
Capacities (Refill)0
S·O·S Information0
Welding on Machines and Engines with Electronic Control0
Maintenance Interval Schedule0
Backup Alarm – Test_
Battery – Recycle
Battery or Battery Cable – Inspect/Replace
Belts – Inspect/Adjust/Replace_
Blade Frame – Adjust
Bucket Cutting Edges – Inspect/Replace0
Bucket Tips – Inspect/Replace
Cab Air Filter – Clean/Replace – If Equipped
Circuit Breakers and Fuses – Reset/Replace
Cooling System Coolant (ELC) – Change
Cooling System Coolant Extender (ELC) – Add
Cooling System Level – Check
Cooling System Water Temperature Regulator – Replace
Drive Chain Case Oil – Change
Drive Chain Tension – Check/Adjust
Engine Air Filter Primary Element – Clean/Replace
Engine Air Filter Secondary Element – Replace
Engine Oil Level – Check
Engine Oil Sample – Obtain
Engine Oil and Filter – Change
Engine Crankcase Breather – Clean
Engine Valve Lash – Check
Fuel Injection Timing – Check_
Fuel System Primary Filter (Water Separator) – Drain
Fuel System Primary Filter (Water Separator) Element – Replace
Fuel System Priming Pump – Operate
Fuel Tank Cap – Clean
Fuel Tank Water and Sediment – Drain
Hydraulic Oil Sample – Obtain
Hydraulic System Oil – Change
Hydraulic System Oil Filter – Replace
Hydraulic System Oil Level – Check
Lift Arm and Cylinder Linkage – Lubricate_
Lower Machine Frame – Clean
Oil Filter – Inspect0
Quick Coupler – Inspect
Radiator Core – Clean
Refrigerant Dryer – Replace – If Equipped
Rollover Protective Structure (ROPS) and Falling Object Protective Structure (FOPS) – Inspect_
Seat Belt – Inspect00
Seat Belt – Replace0
Tilt Cylinder Bearings and Bucket Linkage Bearings – Lubricate0
Tire Inflation – Check0
Tire Segment – Replace – Removal_0
Wheel Nuts – Tighten0
Window Washer Reservoir – Fill – If Equipped0
Window Wiper – Inspect/Replace – If Equipped
Windows – Clean_
Work Tool – Lubricate
Work Tool Mounting Bracket – Inspect
Reference Information Section
Reference Material0
Caterpillar Approved Work Tools
Decommissioning and Disposal0
VIDEO PREVIEW OF THE MANUAL:
IMAGES PREVIEW OF THE MANUAL:
PLEASE NOTE:
- This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
- The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
- Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer