Challenger EU Applicators New Leader NL4330G4 Edge Application System Operator’s Manual

Description

Challenger EU Applicators New Leader NL4330G4 Edge Application System Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

Challenger EU Applicators New Leader NL4330G4 Edge Application System Operator’s Manual – PDF DOWNLOAD

A word to the operator:

It is your responsibility to read and understand the safety section in this manual and the manual for all implements before you operate this machine. You are responsible for your safety. Good safety procedures prevent injury to you and the persons around you. Make the information in the safety section of this manual a part of your safety procedure. This safety section is written only for this type of machine. Safety is your responsibility. You can prevent injury and death.

• This safety section gives basic safety examples that can occur during the operation and maintenance of your machine. This safety section is not a replacement for safety instruction in other sections of this manual.
• Injury or death can occur if the safety instruction is not obeyed. Learn how to operate the machine and how to use the controls correctly. Do not operate the machine if you do not know how to operate the machine.
• Do not let persons operate the machine that do not know how to operate the machine. Follow all safety instructions in the manuals and on the safety signs on the machine, the implements, and the attachments. Use only approved attachments and implements. Make sure that your machine has the correct equipment that is necessary by the local regulations.

Follow safety instructions:

• Carefully read, learn and understand all safety messages and or information in this manual and on machine’s safety signs. Keep safety signs in good condition. Replace missing or damaged safety signs. Make sure the new equipment components and or repair parts include current safety signs.
• See local dealer for replacement safety signs. Never operate machine or equipment without correct instruction and a complete understanding of control operation. Learn to operate the machine and how to use all controls correctly before operation.
• Do not let operator’s not authorized operate the machine, systems and or do service and or maintenance procedures without correct instruction. Keep machine, all components and systems, in correct working condition. Modifications to the machine not authorized by AGCO can decrease functionality and or safety, decrease machine life and void machine warranty.

TABLE OF CONTENTS:

Challenger EU Applicators New Leader NL4330G4 Edge Application System Operator’s Manual – PDF DOWNLOAD

1 Safety 7
1 1 A word to the operator 9
1 1 1 Safety symbol 1 O
1 1 2 Safety messages 10
1 1 3 Information messages 10
1 1 4 Follow safety instructions 1 1
1 1 5 Prepare for emergencies 1 1
1 1 6 Exit the cab in an emergency 1 1
1 2 Operate the machine 13
1 2 1 Prevent machine runaway 1 4
1 2 2 Use correct lamps and markers 1 4
1 2 3 Operation on slopes 1 4
1 2 4 Traveling on public roads 1 5
1 2 5 Stopping and parking 1 5
1 2 6 Overhead Electrical Power Lines 1 5
1 2 7 Avoid Eye Contact with Radar 1 5
1 2 8 Exhaust fumes 1 6
1 2 9 Noise prevention 1 6
1 2 10 Handle fuel correctly 1 6
1 2 1 1 Towing 17
1 3 Maintenance and service 18
1 3 1 Modifications 18
1 3 2 Practice correct maintenance 18
1 3 3 Chemical safety 19
1 3 4 Work in a clean area 2 1
1 3 5 Understand correct service 2 2
1 3 6 Use correct tools 2 2
1 3 7 Support machine correctly 2 3
1 3 8 High pressure fluids 2 3
1 3 9 Service cooling system correctly 2 4
1 3 10 Remove paint before welding or heating 2 4
1 3 1 1 Mobile radio installations 2 5
1 3 1 2 Fire prevention 2 5
1 4 Safety signs 26
1 4 1 Conveyor 27
1 4 2 Caution 27
1 4 3 Hazardous materials 27
1 4 4 High pressure 28
1 4 5 Flying material 28
1 4 6 Spinner 28
1 4 7 Moving parts 29
1 4 8 Falling hazard 29
1 4 9 Guard missing 29
1 5 Informational signs 30
1 5 1 Chain tensioner 3 1
1 5 2 Lube 3 1
1 5 3 Spread pattern 3 2
1 5 4 Lube chart 3 2
1 5 5 Metering scale 3 2
1 5 6 Spinner scale 3 3
Application System
59383801A
Table of contents
2 Introduction 35
2 1 Introduction 37
2 1 1 Intended use 3 7
2 1 2 Proper disposal of waste 3 7
2 1 3 Pre-delivery checklist 38
2 2 Serial number 39
2 2 1 System serial number 3 9
3 Operation 41
3 1 Controller operation 43
3 1 1 View the run screen 4 3
3 1 2 Home screen icons 4 3
3 1 3 Register the machine 4 4
3 1 4 Configure the machine 4 4
3 1 5 Change the machine settings 48
3 1 6 Calibrate the machine components 51
3 1 7 Make a new job 55
3 1 8 Set the bin level 58
3 1 9 Find the optimal feedgate height 59
3 1 10 Set boundary spreading 61
3 1 1 1 View machine diagnostics 63
3 1 1 2 View the machine hydraulics 66
3 1 1 3 Flush the bins 67
3 1 1 4 Lubricate the conveyor chain 69
3 1 1 5 Put the bins into sequence 7 1
3 1 16 Alarm list 7 3
3 2 System controls 75
3 2 1 Armrest controls 7 5
3 2 2 Control instruments 7 5
3 3 Machine preparation 76
3 3 1 Prepare the machine for field testing 76
3 3 2 Prepare the machine for general operation 76
3 4 Spreader preparation 78
3 4 1 Spread pattern test kit 78
3 4 2 Calibrate the spread pattern 78
3 4 3 Crush strength and size grade number 7 9
3 4 4 How to do a crush test 81
3 4 5 How to do a size grade number test 82
3 4 6 Spread pattern test procedure 84
3 4 7 Troubleshoot the spread pattern 86
3 4 8 Find the effective swath width 89
3 4 9 Do a check of the swath width 90
3 5 Apply material 92
3 6 Unload the material 93
3 7 Application system removal and installation 94
3 7 1 Spreader box lifting points 9 4
3 7 2 Remove the MultApplier 9 4
3 7 3 Install the MultApplier 96
3 7 4 Remove the spinner system 10 1
3 7 5 Install the spinner system 106
4 Maintenance 115
4 1 Lubrication and maintenance 117
4 1 1 Maintenance introduction 1 1 7
4 1 2 Lubricant filling reminders 1 1 7
Application System
59383801A
Table of contents
4 1 3 Lubricants and fluids 1 1 7
4 1 4 Maintenance schedule 1 1 9
4 2 Hydraulic system maintenance 121
4 2 1 Replace the hydraulic oil 1 2 1
4 2 2 Replace the oil filter 1 2 2
4 3 System maintenance 123
4 3 1 Check the conveyor gear box oil 1 2 3
4 3 2 Change the conveyor gear box oil 1 2 3
4 3 3 Lubricate the front grease bank 1 2 4
4 3 4 Lubricate the rear grease bank 1 2 5
4 3 5 Lubricate the MultApplier idler take-up screws 1 26
4 3 6 Check the conveyor chain tension 1 2 7
4 3 7 Lubricate the conveyor chain 1 28
4 3 8 Check the conveyor chain 1 30
4 3 9 Clean the bin sensor 1 30
4 3 10 Check the spinner fins 1 3 1
4 3 1 1 Check the spinner deflectors 1 3 2
4 3 1 2 Check the material dividers and hillside flow dividers 1 3 2
4 3 1 3 Clean the bin sensor 1 3 3
4 3 1 4 Remove a conveyor belt shield 1 3 4
4 3 1 5 Install a conveyor belt shield 1 3 5
4 4 Adjustments 138
4 4 1 Adjust the conveyor chain tension 1 38
4 4 2 Adjust a conveyor belt shield 1 3 9
4 4 3 Adjust the vee hood 1 40
4 4 4 Adjust the MultApplier feedgate 1 4 1
4 4 5 Fold up the hillside divider 1 4 2
4 4 6 Fold down the hillside divider 1 4 3
5 Troubleshooting 145
5 1 Troubleshooting 147
5 2 Spreader module LED light alerts 150
5 3 Hydraulic schematics 152
6 Specifications 157
6 1 Application system specifications 159
7 Index 161

CHALLENGER EU APPLICATORS NEW LEADER NL4330G4 EDGE APPLICATION SYSTEM OPERATOR’S MANUAL:

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.V