Challenger EU Tillage 1436 Three-Section Tandem Disc Operator’s Manual 9971402CHC – PDF DOWNLOAD

Description

Challenger EU Tillage 1436 Three-Section Tandem Disc Operator’s Manual 9971402CHC – PDF DOWNLOAD

DESCRIPTION:

Challenger EU Tillage 1436 Three-Section Tandem Disc Operator’s Manual 9971402CHC – PDF DOWNLOAD

A word to the operator :

It is your responsibility to read and understand the safety section in this manual and the manual for all attachments before operating this machine. Remember you are the key to safety. Good safety practices not only protect you, but also the people around you. Study the content in this manual and make the content a working part of your safety program.

• Keep in mind that this safety section is written only for this type of machine. Practice all other usual and customary safe working precautions, and above all remember – safety is your responsibility. You can prevent serious injury or death. This safety section is intended to point out some of the basic safety situations that may be encountered during the normal operation and maintenance of your machine.
• This section also suggests possible ways of dealing with these situations. This section is not a replacement for other safety practices featured in other sections of this manual. Personal injury or death may result if these precautions are not followed. Learn how to operate the machine and how to use the controls properly.
• Do not let anyone operate the machine without instruction and training. For your personal safety and the personal safety of others, follow all safety precautions and instructions found in the manuals and on safety signs affixed to the machine and all attachments. Use only approved attachments and equipment.

This manual:

• This manual covers general safety practices for this machine. The operator manual must always be kept with the machine. Right-hand and left-hand, as used in this manual, are determined by facing the direction the machine will travel when in use.
• The photos, illustrations, and data used in this manual were current at the time of printing, but due to possible in-line production changes, your machine can vary slightly in detail. The manufacturer reserves the right to redesign and change the machine as necessary without notification.

TABLE OF CONTENTS:

Challenger EU Tillage 1436 Three-Section Tandem Disc Operator’s Manual 9971402CHC – PDF DOWNLOAD

1 Safety 7
1 1 Introduction 9
1 1 1 Safety alert symbol 9
1 1 2 Safety messages 9
1 1 3 Informational messages 9
1 1 4 Safety signs 9
1 1 5 A word to the operator 10
1 1 6 This manual 1 1
1 2 Operation 12
1 2 1 Prepare for operation 1 2
1 2 2 General information 1 2
1 2 3 Personal protective equipment 1 3
1 2 4 Seat instructions 1 3
1 2 5 Shield and guards 1 4
1 2 6 Exhaust warning 1 4
1 2 7 Flying debris 1 5
1 2 8 Agricultural chemicals 1 5
1 3 Travel on public roads 16
1 4 Maintenance 18
1 4 1 General maintenance information 1 8
1 4 2 Fire prevention and first aid 19
1 4 3 High pressure leaks 20
1 4 4 Tire safety 2 1
1 4 5 Replacement parts 2 1
1 5 Transport locks 22
1 6 Marker lamps 23
1 7 Safety sign location 24
2 Introduction 33
2 1 Introduction 35
2 1 1 Intended use 35
2 1 2 Proper disposal of waste 35
2 2 Machine identification 36
2 2 1 Serial number plate 36
2 2 2 Serial number description 36
2 3 Three-section tandem disc 38
2 4 Major components 39
2 5 Operator manual storage 41
3 Operation 43
3 1 Bleeding air from the hydraulic lift system 45
3 2 Bleeding air from the hydraulic fold system 46
3 3 Connecting the machine to the tractor 48
3 4 Disconnecting the machine from the tractor 50
3 5 Preparing the machine for transport 51
3 6 Preparing the machine for field operation 52
3 7 Beginning field operation 53
3 7 1 Items to check after first operation 53
Three-Section Tandem Disc
9971402CHC
Table of contents
3 8 Leveling the machine 54
3 8 1 Tongue to frame setting 5 4
3 8 2 Hydraulic self-leveler 5 4
3 8 3 Adjusting the hydraulic self-leveler pointer 5 4
3 8 4 Self-leveler anchor adjustment 5 5
3 8 5 Leveling the center frame side to side 5 5
3 8 6 Leveling the wings to the center frame 56
3 9 Adjusting the gauge wheels 59
3 10 Operating depth 60
3 1 0 1 Single point depth control 6 0
4 Maintenance 61
4 1 Lubrication and maintenance chart 63
4 2 Lubrication fitting locations 64
4 3 Servicing the wheel bearings 66
4 4 Servicing the tandem pivot bearings 67
4 5 Servicing the trunnion bearings 68
4 6 Machine gangs 69
4 7 Storage 70
4 7 1 Preparing the machine for storage 7 0
4 7 2 Preventing corrosion of extended hydraulic cylinders 7 1
4 7 3 Removing the machine from storage 7 1
5 Troubleshooting 73
5 1 Troubleshooting 75
6 Specifications 77
6 1 Specifications 79
6 2 Transport dimensions 80
6 3 Minimum tow vehicle weight 81
6 4 Maximum transport speed 82
6 5 Tire air pressure 83
7 Assembly 85
7 1 Preparing for assembly 87
7 1 1 Service parts 8 7
7 2 Assembling the 21 to 29 ft center frame 88
7 2 1 Installing the center lift hubs and wheels 89
7 2 2 Installing the 2 1 to 29 ft fold anchor 90
7 2 3 Installing the 2 1 to 29 ft light bar and slow moving vehicle emblem 91
7 3 Assembling the 31 to 36 ft center frame 92
7 3 1 Installing the center lift hubs and wheels 93
7 3 2 Installing the 3 1 to 36 ft front fold anchor 94
7 3 3 Installing the 3 1 to 36 ft rear fold anchor 95
7 3 4 Installing the 3 1 to 36 ft light bar and slow moving vehicle emblem 96
7 4 Installing the tongue 97
7 5 Installing the standard leveler 98
7 5 1 Installing the leveler L 98
7 5 2 Installing the leveler connecting link 99
7 5 3 Attaching the standard leveler tube to the leveler L 1 00
7 5 4 Mounting the rear of the standard leveler tube 1 01
7 6 Installing the hydraulic leveler 102
7 6 1 Installing the leveler L 1 02
7 6 2 Installing the leveler connecting link 1 03
Three-Section Tandem Disc
9971402CHC
Table of contents
7 6 3 Installing the cylinder on the hydraulic leveler tube 104
7 6 4 Attaching the indicator scale to the hydraulic leveler 105
7 6 5 Attaching the hydraulic leveler tube to the leveler L 106
7 6 6 Installing the hydraulic leveler indicator rod 107
7 6 7 Mounting the rear of the hydraulic leveler tube 108
7 6 8 Attaching the lock valve to the tongue 109
7 6 9 Installing the 21 to 29 ft leveler hydraulics 110
7 6 10 Installing the 31 to 36 ft leveler hydraulics 111
7 7 Installing the stroke control assembly 112
7 7 1 Installing the front of the stroke control 112
7 7 2 Installing the rear of the stroke control 113
7 8 Installing the marker lamps 114
7 8 1 Installing the marker lamp arms 114
7 8 2 Attaching the marker lamps to the marker lamp arms 115
7 8 3 Attaching the marker lamps to the marker lamp bar 116
7 8 4 Installing the marker lamp harness 117
7 9 Marker lamp harness routing 118
7 10 Installing the center frame disc gangs 120
7 10 1 21 to 29 ft center frame disc gang locations 121
7 10 2 31 to 36 ft center frame disc gang locations 122
7 11 Installing the wings 123
7 11 1 Attaching the wing gangs to the center gangs 123
7 11 2 21 to 29 ft wing frame disc gang locations 124
7 11 3 31 to 36 ft wing frame disc gang locations 125
7 11 4 Attaching the wing frame to the wing gangs 126
7 11 5 Installing the wing lift hubs and wheels 127
7 12 Installing the rear tow hitch 129
7 12 1 Installing the rear tow hitch hydraulics 130
7 12 2 Installing the rear tow hitch harness 131
7 13 Installing the hydraulics 133
7 13 1 Installing the right-hand wing lift hydraulics 134
7 13 2 Installing the center lift hydraulics 136
7 13 3 Installing the left-hand wing lift hydraulics 139
7 13 4 Installing the 21 and 24 ft fold hydraulics 141
7 13 5 Installing the 27 to 36 ft fold hydraulics 143
7 14 Lift hydraulics routing 145
7 15 21 and 24 ft fold hydraulics routing 148
7 16 27 to 36 ft fold hydraulics routing 150
7 17 21 to 24 ft hose holder locations 152
7 18 27 to 29 ft hose holder locations 154
7 19 31 to 36 ft hose holder locations 156
7 20 21 to 29 ft component locations 158
7 21 31 to 36 ft component locations 160
7 22 Checklists 162
7 22 1 Pre-delivery checklist 16 2
7 22 2 Delivery checklist 16 2
8 Index 163

CHALLENGER EU TILLAGE 1436 THREE-SECTION TANDEM DISC OPERATOR’S MANUAL 9971402CHC – PDF DOWNLOAD:

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
• This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
• Require some other service manual or have any queries: please WRITE to us at [email protected]

S.V