Challenger EU Tractor MT755E MT765E MT775E Rubber Track Operator Manual 582731D1D
$89.95 Original price was: $89.95.$24.95Current price is: $24.95.
Challenger EU Tractor MT755E MT765E MT775E Rubber Track Operator Manual 582731D1D – PDF DOWNLOAD
МТ755Е
AGCC0755xGxxx1001-
МТ765Е
AGCC0765xG xxx1001-
МТ775Е
AGCC0775xG xxx1001
Description
Challenger EU Tractor MT755E MT765E MT775E Rubber Track Operator Manual 582731D1D – PDF DOWNLOAD
IMAGES PREVIEW OF THE MANUAL:
FILE DETAILS:
Challenger EU Tractor MT755E MT765E MT775E Rubber Track Operator Manual 582731D1D – PDF DOWNLOAD
Size : 54.1 MB
Format : PDF
Language : English
Brand: Challenger EU
Type of machine: Agricultural-Tractor
Type of document: Operator Manual
Model: Challenger EU MT755E MT765E MT775E Rubber Track Tractor Tier 4
Date: 2018
Number of Pages: 368 Pages
Serial Number: AGCC07X5XGXXX1001 and Later
Part Number: 582731D1D
DESCRIPTION:
Challenger EU Tractor MT755E MT765E MT775E Rubber Track Operator Manual 582731D1D – PDF DOWNLOAD
МТ755Е
AGCC0755xGxxx1001-
МТ765Е
AGCC0765xG xxx1001-
МТ775Е
AGCC0775xG xxx1001
- This operator manual uses the latest information available at the time of publication. Read the operator manual carefully before operating the machine. Right-hand and left-hand, as used in the operator manual, is determined Ьу facing the direction that the machine travels when in use.
- Photos, illustrations, and data used in the operator manual were current at the time of publishing. Because of possible production changes, each machine сап vary. Manufacturer reserves the right to redesign and change the machine as necessary without notification.
Important safety information :
Failure to оЬеу basic safety rules and precautions сап cause personal injuries during product operation, maintenance, ог repair. Know dangerous situations before ап injury occurs. А person must Ье alert to possible dangers. This person must also have the necessary training, skills and tools to do these operations correctly.Incorrect operation, lubrication, maintenance ог repair of this product сап Ье dangerous and сап result in injury ог death.
- Read and understand all the information about the operation, lubrication, maintenance, and repair before operating оп this machine. The product and this manual give safety precautions and warnings. Bodily injury ог death сап occur to you ог to other persons if all warnings аге not heeded. Not every possible circumstance that сап involve а potential danger сап Ье anticipated.
- The warnings in this publication and оп the product аге, thus, not all inclusive. If а tool ог procedure, not recommended Ьу AGCO, is used, make sure they аге safe for everyone. Ап operator must make sure the product will not Ье dangerous ог damaged Ьу the operation, lubrication, maintenance ог repair procedures selected. Information, specifications, and illustrations in this publication come from information available at the time of publication production.
- Specifications, torques, pressures, measurements, adjustments, illustrations, and other items сап change at any time. These changes сап change the service that is given to the product. Get the complete and most current information before starting а job. AGCO dealers have the most current information available.
TABLE OF CONTENTS:
Challenger EU Tractor MT755E MT765E MT775E Rubber Track Operator Manual 582731D1D – PDF DOWNLOAD
1 Safety 13
1 1 Safety signs 15
1 1 1 Operator Manual 15
1 1 2 Safety symbol 15
1 1 3 Safety messages 15
1 1 4 lnformation messages 15
1 1 5 Safety signs 1 6
1 1 6 lmportant safety information 1 6
1 1 7 General hazard information 1 7
1 1 8 Pressurized air 18
1 1 9 Asbestos information 18
1 1 10 Electrical storm injury prevention 18
1 1 1 1 Mount and dismount the machine 18
1 1 1 2 Before you start the engine 1 9
1 1 1 3 Start the engine 1 9
1 1 1 4 Before operation 1 9
1 1 15 Procedures for operation 1 9
1 1 1 6 Park the machine 20
1 1 1 7 Орегаtог station 20
1 1 18 Cut and crush prevention 21
1 1 1 9 Rollover protective structure 21
1 1 20 Burn prevention 22
1 1 21 Coolant 22
1 1 22 Oils 22
1 1 23 High pressure lines 22
1 1 24 Fluid penetration 23
1 1 25 Batteries 23
1 1 26 Exhaust fumes 24
1 1 27 Noise prevention 25
1 1 28 Fire and explosion prevention 25
1 1 29 Fire extinguisher 26
1 1 30 PuЫic road transportation 26
1 2 Safety signs and labels 27
1 3 Engine safety signs 28
1 3 1 lnformational – саЬ air conditioning 29
1 3 2 Explosion hazard 29
1 3 3 Belt routing 29
1 3 4 Engine oil filter 29
1 3 5 Separator filter 30
1 3 6 Fuel filter 30
1 3 7 Hot pressurized liquid hazard 30
1 3 8 Hot surface 30
1 3 9 High pressure hazard 3 1
1 3 10 Entanglement 3 1
1 3 1 1 Entanglement 3 1
1 3 1 2 Run over hazard 3 2
1 3 1 3 Fuel filter 3 2
1 3 1 4 Separator filter 3 2
1 3 15 lnformational – engine air cleaner 3 2
1 3 1 6 Engine oil filter 3 3
1 3 1 7 Engine oil sign 3 3
1 4 Chassis safety signs 34
Rubber Track Tractor
582731010
ТаЬ!е of contents
1 4 1 Engine cover support crush hazard 3 5
1 4 2 Lift point 3 5
1 4 3 T ie down 3 5
1 4 4 Radiation hazard 3 5
1 4 5 Fall off hazard 3 6
1 4 6 Operators manual 3 6
1 4 7 Torque 3 6
1 4 8 Ultra low sulfur diesel fuel 3 6
1 4 9 Pinch hazard 3 7
1 4 10 Rear rollover 3 7
1 4 1 1 Crush warning 3 7
1 4 1 2 Power take off 3 7
1 4 1 3 Transmission oil fill 3 8
1 4 1 4 Torque 3 8
1 4 1 5 Torque 3 8
1 4 1 6 No step 3 8
1 5 СаЬ safety signs 39
1 5 1 Run-over hazard 4 0
1 5 2 Roll-over hazard 4 0
1 5 3 Bystander notification 4 0
1 5 4 Operators manual 4 0
1 5 5 Park brake 4 1
1 5 6 lnstallation date 4 1
1 5 7 Alternate exit 4 1
1 6 Hydraulic safety signs 42
1 6 1 Explosion injection hazard 4 3
1 6 2 High pressure hazard 4 3
1 6 3 High pressure fluid 4 4
1 6 4 Pressurized fluid 4 4
1 6 5 Hydraulic couplers 4 4
1 6 6 Hydraulic oil filter 4 4
1 6 7 Oil level 4 5
1 7 Electrical safety signs 46
1 7 1 Fuse / relays 4 7
1 7 2 Rear terminal mini fuse relay 4 7
1 7 3 Electrical hazard 4 7
1 7 4 Battery explosion 4 7
1 7 5 1 2v olt 4 8
1 7 6 Electrical ground 4 8
1 7 7 Wire access 4 8
1 7 8 Battery shut off 4 8
2 lntroduction 49
2 1 Machine identification information 51
2 2 Serial number definition 53
2 3 lntended use 55
2 4 Proper disposal of waste 56
2 5 Pre-Delivery 57
2 5 1 Pre-delivery checklist 5 7
2 6 Emissions warranty 58
2 6 1 United States and Canada emission control warranty statement 5 8
2 6 2 California emission control warranty statement 6 1
3 Operation 65
3 1 General inspection 69
3 1 1 Walk-around inspection 6 9
Rubber Тrack Тractor
582731010
ТаЬ!е of contents
3 2 Start the engine 71
3 2 1 Pre-start checks 7 1
3 2 2 Start the engine 7 1
3 2 3 Start the engine in normal conditions 7 1
3 2 4 Engine starting with jumper саЫеs 7 2
3 3 Engine start switch 73
3 4 Monitor mounting bar 74
3 5 Lamp switches 75
3 5 1 Multifunction light switch оп the steering column 7 5
3 5 2 Extremity lamps 7 6
3 5 3 lnterior lamps 7 6
3 5 4 Courtesy lamp 7 6
3 5 5 СаЬ switches 7 7
3 5 6 Exterior courtesy lamps 7 8
3 5 7 Lighting shutdown delay 7 8
3 5 8 Rotating beacon 7 9
3 5 9 Backlighting for switches in the саЬ 7 9
3 6 Dash panel 80
3 7 Steering wheel 83
3 7 1 Horn 8 3
3 7 2 Steering wheel tilt lever 8 3
3 8 Mirrors 84
3 8 1 lnside геаг view mirror 8 4
3 8 2 Outside геаг view mirrors 8 4
3 9 Radio 85
3 9 1 Steering wheel controls 8 5
3 9 2 Blue tooth microphone 8 5
3 10 Windows 86
3 10 1 Window sun screen 8 6
3 10 2 Open the геаг window 8 6
3 10 3 Rear window as an alternate exit 8 6
3 10 4 Exit the саЬ in an emergency 8 6
3 11 Storage and literature compartments 88
3 1 2 Operator seat 89
3 1 2 1 Armrest adjustment 8 9
3 1 2 2 Standard operator seat 8 9
3 1 2 3 Heated and ventilated seats 9 1
3 1 2 4 Deluxe heated – vented seat 9 2
3 1 2 5 lnstructor seat 9 3
3 1 2 6 Seat belts 9 4
3 1 2 7 Operator presence functionality 9 4
3 1 3 Exterior tool Ьох 95
3 1 4 Heating and air conditioning controls 96
3 1 4 1 Automatic temperature controls 9 6
3 1 4 2 Manual temperature control system 9 7
3 1 5 Vent locations 98
3 1 6 Machine management center 99
3 1 6 1 Terminal 9 9
3 1 6 2 Machine management center version information 10 0
3 1 6 3 Set the measurement units 10 0
3 1 6 4 Set the language 10 2
3 1 6 5 Set the decimal display 10 3
3 1 6 6 Set the time and date 10 3
3 1 6 7 Terminal settings 10 4
3 1 6 8 Applications 10 6
Rubber Track Tractor
582731010
ТаЬ!е of contents
3 16 9 Select an auxiliary input 10 7
3 16 1О View the screens 10 8
3 16 11 Engine 10 8
3 16 1 2 Transmission 110
3 16 1 3 Hydraulic 111
3 16 1 4 Powertrain protection software (PPS) 11 2
3 16 15 Measure INST (instantaneous) 11 2
3 16 16 Measures – field 11 3
3 16 1 7 Measures – fuel 11 4
3 16 18 Memory 11 4
3 16 19 Power management 11 7
3 16 20 Tractor settings 118
3 16 21 Slip alarm 119
3 16 22ISO 11 7 8 3 Class 3 1 21
3 16 23 Service intervals 1 22
3 16 24 Headland management 1 26
3 16 25 Headland management icon identification 1 29
3 16 26 DT C (diagnostic trouЫe codes) stored ог active 1 3 1
3 16 27 Track tension 1 3 2
3 16 28 3-point linkage 1 3 3
3 16 29 Slip calibration 1 3 5
3 16 3 0 Steering calibration 1 3 7
3 16 3 1 lnching pedal calibration 1 3 9
3 16 3 2 Radar calibration 1 4 0
3 16 3 3 ЕnаЫе the video camera – software version 3 2 and before 1 4 2
3 17 Air system operation 143
3 17 1 Air trailer brake couplers 1 4 3
3 17 2 Air hose connection 1 4 4
3 18 Machine control 145
3 18 1 Throttle control 1 4 5
3 18 2 Decelerator – if equipped 1 4 5
3 18 3 Power management 1 4 5
3 18 4 Brake control 1 4 6
3 18 5 Service brakes 1 4 6
3 18 6 Hydraulic trailer brake if equipped 1 4 7
3 18 7 Park brake 1 4 7
3 18 8 Manual parking brake handle 1 4 8
3 19 Overweight protection strategy (OWPS) 149
3 20 lnching pedal control 150
3 21 Transmission 151
3 21 1 Transmission control 15 1
3 21 2 Machine ground speeds 15 1
3 21 3 Ground speeds for сгеерег transmission 15 2
3 21 4 Сгеерег gear 15 2
3 21 5 Transmission control lever 15 3
3 21 6 Transmission shifting diagram 15 4
3 21 7 Preselect а gear before you move 15 4
3 21 8 Use of the inching clutch control 15 4
3 21 9 Operate the shuttle shift 15 4
3 21 10 Speed match 15 5
3 22 Hydraulic controls 156
3 22 1 Hydraulic control valve operation 15 6
3 22 2 Roading lockout switch for the hydraulic control levers 15 8
3 23 General hydraulic connections 159
3 23 1 Connect hoses to the quick couplers 1 5 9
3 23 2 Disconnect hoses from the quick couplers 16 0
3 23 3 Hydraulic flow management 16 0
Rubber Тrack Тractor
582731010
ТаЬ!е of contents
3 23 4 Hydraulic motors 1 6 0
3 23 5 Selection of hydraulic motors 1 6 0
3 23 6 Single acting cylinders 1 6 1
3 23 7 Connect а douЫe acting cylinder 1 6 1
3 23 8 Connect hydraulic motors to the control valves 1 6 1
3 23 9 Connect the hydraulic motor with the flow control valve 1 6 2
3 23 10 Connect а grain cart with an auger motor 1 6 2
3 23 1 1 Semi – mounted vacuum planter with the lift assist wheels 1 6 4
3 23 1 2 Connect the vacuum planter 1 6 4
3 23 1 3 Connect the air seeder ог the grain drill 1 6 5
3 23 1 4 Connect the auxiliary implement controls 1 6 7
3 23 1 5 Connect the spray system pump 1 6 7
3 23 1 6 Connect а hydraulic motor to power beyond 1 6 7
3 23 1 7 Hydraulic power beyond 1 6 8
3 23 1 8 Connect the auxiliary implement control valve with load sense 1 6 8
3 23 19 Connect the auxiliary implement control valve without load sense 1 6 9
3 24 Electrical system 170
3 24 1 Radar unit 1 7 0
3 24 2 Radar connector 1 7 0
3 24 3 Battery disconnect switch 1 7 1
3 24 4 Single pole connectors 1 7 1
3 24 5 Auxiliary power switch 1 7 1
3 24 6 Trailer connector 1 7 2
3 24 7 Put the implement саЫе into the саЬ 1 7 2
3 24 8 ISO 1 1 7 8 3 connector 1 7 2
3 25 3-point linkage 174
3 25 1 Console controls 1 7 4
3 25 2 3-point linkage 1 7 4
3 25 3 Adjust the 3-point linkage control lever 1 7 4
3 25 4 Raise/lower switch for the 3-point linkage 1 7 5
3 25 5 External 3-point linkage switch 1 7 5
3 25 6 Roading the machine with an implement 1 7 6
3 25 7 Level the implement 1 7 6
3 25 8 Adjust the draft arm 1 7 6
3 25 9 Adjust the top link 1 7 7
3 25 10 Replace the rubber stops оп the wide swing drawbar 1 7 8
3 25 1 1 Replace the wear plates and the rubber stops оп the standard drawbar 1 7 8
3 25 1 2 Lift linkages and quick hitch 1 7 9
3 25 1 3 Setting the 3-point linkage side sway 1 8 0
3 26 Capture the steeraЫe 3-point linkage 182
3 27 3-point hitch lift assist 183
3 28 Connect the implements 184
3 28 1 Connect the implements to the 3-point hitch 1 8 4
3 28 2 Connect the implements to the quick hitch 1 8 4
3 29 Disconnect the implements 185
3 29 1 3-point hitch implements 1 8 5
3 29 2 Ouick Hitch implements 1 8 5
3 30 Drawbar 186
3 3 0 1 Wide swing drawbar 1 8 7
3 3 0 2 Adjust the wide swing drawbar support 1 8 7
3 3 0 3 Safety chain 1 8 8
3 3 0 4 Category three pin with adapter plate for category four drawbar 1 8 8
3 3 0 5 Connect category four drawbar implements 1 8 8
3 3 0 6 Connect the category three drawbar implements 19 0
3 3 0 7 Connect the drawbar implements 19 0
3 31 Power take off (РТО) 19 2
3 3 1 1 Operate the power take-off 19 2
Rubber Track Tractor
582731010
ТаЬ!е of contents
3 3 1 2 Power take-off shaft 19 2
3 3 1 3 Connect the power take-off implements 19 3
3 32 Towing and transportation 194
3 3 2 1 Roading the machine 19 4
3 3 2 2 Operate оп the road with а 3-point linkage mounted implement 19 5
3 3 2 3 High speed road operation 19 5
3 3 2 4 Basic towing 19 6
3 3 2 5 Tow а stuck machine 19 6
3 3 2 6 Tow а machine with а dead engine 19 6
3 3 2 7 Accumulator without pressure 19 7
3 3 2 8 Transport the machine 19 8
3 33 Performance recommendations 199
3 3 3 1 Machine performance 19 9
3 34 Tracks 2 0 0
3 3 4 1 Track selection 20 0
3 3 4 2 Low profile tracks 20 0
3 3 4 3 General ag tracks 20 0
3 3 4 4 Extreme application tracks 20 0
3 3 4 5 Width of track 20 1
3 35 Machine ballasting 2 0 2
3 3 5 1 Levels of ballast 20 3
3 3 5 2 Add weights 20 3
3 3 5 3 Maximum machine weight 20 4
3 36 Weights 206
3 3 6 1 lnstall the front weights 20 7
3 3 6 2 ComЬinations of idler weights 20 7
3 3 6 3 lnstall auxiliary idler weight 20 9
3 37 Mobll track system (MT S) 2 11
3 37 1 MoЬil track system 21 1
3 37 2 Turn performance 21 2
3 38 Moldboard plough applications 2 14
3 3 8 1 Moldboard plough applications 21 4
3 3 8 2 Rollover ploughs 21 5
4 Maintenance 2 17
4 1 Lubricant viscosities and refill capacities 2 19
4 1 1 Lubricant viscosities for amЬient temperatures 219
4 1 2 Lubricant viscosities 219
4 1 3 Refill capacities 219
4 2 Service intervals 2 2 1
4 2 1 Maintenance chart 221
4 2 2 Maintenance schedule 222
4 3 Fuse panel 2 24
4 3 1 Main fuse panel 224
4 3 2 Fuse Ыосk one 225
4 3 3 Fuse Ыосk two 226
4 3 4 Fuse relay Ыосk one 227
4 3 5 Fuse relay Ыосk two 228
4 3 6 Relay and fuse panel for chassis 228
4 3 7 Main fuse 229
4 4 Engine 2зо
4 4 1 Open the engine cover 23 0
4 4 2 Replace the engine air filter 23 0
4 4 3 Change the prefilter and the fuel filters 23 1
4 4 4 Fill the fuel system 23 2
4 4 5 Do а check of the engine oil level 23 3
Rubber Тrack Тractor
582731010
ТаЬ!е of contents
4 4 6 C h a n g e t h e e n g i n e o i l a n d o i l fi lter 234
4 4 6 1 l n s pect t h e used fi lters 2 3 5
4 4 7 E n g i n e o i l sa m p l e port 2 3 6
4 4 8 E n g i n e be lts 2 3 6
4 4 9 E n g i n e t e m p e ra t u re 2 3 6
4 4 1 0 H ow t o recog n i ze a n e n g i n e w i t h hyd ra u l i c l a s h adj u sters 237
4 5 Engine belts removal and installation 238
4 5 1 Remove t h e m a i n s e rpe n t i n e belt 238
4 5 2 l n sta l l t h e m a i n se rpe nti n e belt 240
4 5 3 Remove t h e water p u m p b e l t 242
4 5 4 l n sta l l t h e water p u m p b e l t 245
4 6 Fuel system 246
4 6 1 Fuel сар 246
4 6 2 F i l l t h e f u e l syste m 246
4 6 3 F u e l ta n k water a n d sed i m e nt d ra i n 247
4 6 4 F u e l water separato r 248
4 6 5 Pri m e t h e f u e l syste m 248
4 6 6 D ra i n the f u e l ta n k 249
4 6 7 C h a n g e t h e prefi lter a n d the f u e l fi lters 249
4 7 Selective catalytic reduction (SCR) System 2 5 1
4 7 1 S u pply mod u l e 2 5 1
4 7 2 D i e s e l exha ust f l u i d ( D E F) ta n k 2 5 2
4 7 3 D E F h eate r c i rc u i t fuse 253
4 7 4 DEF stora ge a n d shelf l ife 253
4 8 Cooling system 254
4 8 1 C l e a n the coo l i n g cores 254
4 8 2 Water va lve s h utoff 254
4 8 3 Do а c h e c k o f t h e e n g i n e coo l a n t l eve l 2 5 5
4 8 4 D ra i n the e n g i n e coo l a nt 2 5 5
4 8 5 Coo l i n g syste m a d d itives 2 5 6
4 8 6 Coo l a nt s a m p l e 2 5 6
4 8 7 Replace the wate r t e m p e ratu re t h e r m ostat 2 5 7
4 9 Flush and refill the cooling system 258
4 9 1 Coo l a nt system f l u i d 2 5 8
4 9 2 F l u s h t h e coo l i n g syste m 2 5 8
4 9 3 Refi l l t h e coo l i n g syste m 2 5 9
4 10 Hydraulics – do а check and change the system oil 260
4 1 0 1 Do а check of t h e hyd ra u l i c syste m o i l 260
4 1 0 2 Change t h e hyd ra u l i c syste m oil 2 6 1
4 11 Hydraulic filters 263
4 1 1 1 Replace the tra n s m i s s i o n a n d stee r i n g fi lter 263
4 1 1 2 Replace the i m p l e m e nt fi lters 263
4 1 1 3 Replace t h e i m p l e m e nt case d ra i n fi lter 263
4 1 1 4 Replace the steeri n g p u m p case d ra i n fi lter 2 64
4 1 1 5 Remove t h e s u ction screen 2 6 5
4 1 1 6 Replace the tra n s m i s s i o n o i l 2 6 5
4 1 2 СаЬ filtration 268
4 1 2 1 Pri m a ry fresh a i r fi lter 268
4 1 2 2 Remove t h e pri m a ry air fi lter 268
4 1 2 3 F i lter m a i nte n a n ce 268
4 1 2 4 Clean the fi lter 269
4 1 2 5 l n sta l l the p r i m a ry air fi lter 269
4 1 2 6 Remove t h e rec i rc u lation fi lter 269
4 1 2 7 l n sta l l the rec i rc u lation fi lter 270
4 1 3 U ndercarriage (Mobll trac) system 27 1
4 1 3 1 Do а check of t h e o i l l eve l fo r the d rive w h e e l h u bs 2 7 1
Rubber Track Tractor
582731010
ТаЬ!е of contents
4 1 3 2 C h a n g e t h e d rive w h e e l h u b o i l 2 7 1
4 1 3 3 Do а check o f t h e o i l l eve l fo r t h e i d l e r w h e e l a n d t h e m i d ro l l e r w h e e l h u bs 2 7 2
4 1 3 4 C h a n g e t h e o i l о п t h e i d l e r a n d t h e m i d ro l l e r w h e e l h u b 2 7 2
4 1 3 5 Tra c k a n d u n d e rcarriage i n s pection 2 7 2
4 1 3 6 Adj ust t h e g a u g e s pa c i n g 273
4 1 3 7 M ea s u re t h e g a u g e spaci n g 2 7 9
4 1 4 Detension the tracks 282
4 1 4 1 Release the press u re betwe e n t h e n i p p l e and the fi l l e r va lve 283
4 1 5 Tension the tracks 284
4 1 5 1 Ad d tension to the tra c ks 2 84
4 1 6 Replace the track 287
4 17 Track alignment 289
4 1 7 1 Tra c k a l i g n m e n t 289
4 1 7 2 C h e c k the a l i g n m e n t 289
4 1 7 3 Adj u st the a l i g n m e n t 289
4 1 7 4 Adj u st the a l i g n m e n t – more p roced u res 290
4 18 Battery removal and installation 292
4 1 8 1 Remove t h e batte ries 292
4 1 8 2 l n sta l l the batte ries 2 94
4 19 Maintenance access 297
4 1 9 1 Remove t h e g u a rd s 297
4 1 9 2 Remove t h e e n g i n e fa n g u a rd s 298
4 20 Prepare for the cold season 299
4 2 0 1 Cold season 299
4 2 0 2 Cold sta rt 299
5 TrouЫ eshooting 301
5 1 Heating and air conditioning trouЫ eshooting 303
5 1 1 Retrieve d i a g nostic i nfo rmation from t h e a utomatic t e m p e ratu re control u n it 303
5 2 Electrical system trouЬleshooting 306
5 3 Brake trouЫ eshooting 307
5 4 Engine trouЫ eshooting 309
5 4 1 Low d i e s e l exh a u st f l u i d ( D E F) l eve l 3 1 4
5 5 Hydraulic trouЬleshooting 3 1 5
5 6 3- point linkage trouЫ eshooting 3 1 7
5 7 Transmission trouЫ eshooting 3 1 9
5 8 Steering system trouЬleshooting 32 1
5 9 Auto-Guide trouЬleshooting 326
5 9 1 Auto-G u i de ready i n d i cato r is not оп 326
5 9 2 Auto-G u i de ready i n d i cato r i s о п 327
5 9 3 Auto-G u i de de-a ctivates d u ri n g operation 327
5 10 Machine Error Codes 329
5 1 0 1 E n g i n e e rro r codes 329
5 1 0 2 Tra n s m i s s i o n e rror codes 33 1
5 1 0 3 Arm rest Е С М e rro r codes 336
5 1 0 4 Auxi l i a ry va lve one ЕСМ e rror codes 340
5 1 0 5 Auxi l i a ry va lve two ЕСМ e rror codes 341
5 1 0 6 Auxi l i a ry va lve th ree ЕСМ e rro r codes 341
5 1 0 7 Auxi l i a ry va lve fo u r Е С М e rro r codes 342
5 1 0 8 Auxi l i a ry va lve five Е С М e rror codes 342
5 1 0 9 Auxi l i a ry va lve six Е С М e rror codes 343
5 1 0 1 0 Fro nt l i g h t i n g Е С М e rror codes 343
5 1 0 1 1 Roof l i g h t i n g Е С М e rro r codes 344
5 1 0 1 2 Rea r l i g h t i n g Е С М e rro r codes 344
Rubber Тrack Тractor
582731010
ТаЬ!е of contents
6 Specifications 3 47
6 1 Engine specifications 3 4 9
6 2 Torq u e specifications 350
6 2 1 Constant torque hose clamps 3 5 0
6 3 General dimensions 351
6 3 1 Rear view dimensions 3 5 2
6 4 S hipping weig hts 354
6 5 Machine specifications – МТ700 Е 356
6 6 Machine components 359
6 7 Noise vibration l evel 3 60
7 lndex 3 6 1
Rubber Track
CHALLENGER EU TRACTOR MT755E MT765E MT775E RUBBER TRACK OPERATOR MANUAL 582731D1D:
PLEASE NOTE:
- This is the SAME MANUAL used by the dealerships to diagnose your vehicle
- No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
- Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
- So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com
S.V
What Our Customers Say
🌟 Related Products
Discover more professional manuals for your equipment

Challenger 4460 4660 Sprayer (Auto Trans) Liquid Sprayers Parts Manual - PDF DOWNLOAD

Challenger MT700 Series Track Tractors Parts Manual - PDF DOWNLOAD

Challenger 874 1074 1274 Rogator Liquid System Row Crop Chassis Parts Manual - PDF DOWNLOAD



