Challenger MT400E Series MT 465E MT 475E MT 485E MT 495E TechStar CVT Deluxe & Premium Versions Operator Manual ACT001910A

Description

Challenger MT400E Series MT 465E MT 475E MT 485E MT 495E TechStar CVT Deluxe & Premium Versions Operator Manual ACT001910A – PDF DOWNLOAD

DESCRIPTION:

Challenger MT400E Series MT 465E MT 475E MT 485E MT 495E TechStar CVT Deluxe & Premium Versions Operator Manual ACT001910A – PDF DOWNLOAD

Operator’s Manual :

• The purpose of this manual is to еnаЫе the owner and the operator to operate the tractor appropriately under normal conditions of use. Providing they follow the instructions carefully, the tractor will give many years of service in the Challenger tradition. Use for any other activity (particularly forestry work) is considered to Ье contrary to the intended use. The commissioning of equipment Ьу the Challenger dealer оп the user’s premises enaЫes the dealer to ensure that these operating and service instructions are properly understood.
• Always consult the Challenger dealer if there is any part of this manual that you do not understand. lt is important that these instructions are understood and followed. This manual does not cover all operation and safety instructions relevant to the implements and accessories that may Ье fitted at the time of tractor delivery or later. lt is essential that operators use and understand the Operator’s Manuals relating to these implements and accessories.

IMPORTANT:

• This manual must always Ье kept with the tractor. For extra copies, contact your Challenger dealer. This chapter in the Operator’s Manual highlights certain basic safety-related situations that may Ье encountered during normal operation and servicing of the tractor and provides the information needed to handle these situations. This chapter supplements any safety instructions given in other chapters of this manual.
• lt may Ье necessary to take additional precautions, depending оп the implements and accessories used and the working conditions on-site or in the service area. Challenger сап under по circumstances exercise direct control over the commissioning, operation, inspection, lubrication or servicing of the tractor. lt is therefore YOUR responsibility to take suitaЫe safety precautions in such areas.

IMAGES PREVIEW OF THE MANUAL:

TABLE OF CONTENTS:

Challenger MT400E Series MT 465E MT 475E MT 485E MT 495E TechStar CVT Deluxe & Premium Versions Operator Manual ACT001910A – PDF DOWNLOAD

1 Tractor identification 11
1 1 Locating serial numbers 13
1 1 1 Locating serial numbers 1 3
1 2 Your tractor identification details 15
1 2 1 Your tractor identification details 1 5
2 Safety instructions and safety points – Warranty 17
2 1 lntroduction 19
2 1 1 lntroduction – Safety instructions 1 9
2 2 Safety – Symbols and terms 21
2 2 1 Safety- Symbols and terms 2 1
2 3 Safety decals and instructions 22
2 3 1 Checking and replacing the safety decals and instructions 2 2
2 3 2 Presentation and location of the safety decals and instructions 2 3
2 4 General safety instructions 28
2 4 1 Awareness of the safety instructions and symbols 2 8
2 4 2 Operator familiarity in the use of the tractor 2 8
2 4 3 Filling the fuel tank 2 9
2 4 4 Mounting and dismounting the operator’s seat 2 9
2 4 5 Mandatory procedure before dismounting the tractor 30
2 5 Special safety instructions for preparing the tractor for use 31
2 5 1 Protective clothing 31
2 5 2 Activated carbon filter information 31
2 5 3 Safety devices and items 34
2 5 4 Checking the tractor 34
2 6 Specific safety instructions for starting the tractor 36
2 6 1 Protection of persons other than the operator 36
2 6 2 Start up safely 36
2 6 3 Starting the tractor with jump start саЫеs 37
2 6 4 Checks to Ье carried out after start-up 38
2 7 Specific safety instructions for using the tractor 39
2 7 1 General instructions 39
2 7 2 Protection of persons other than the operator 4 0
2 7 3 Overturning 4 0
2 7 4 Tractor towing 4 3
2 7 5 Regulatory data оп maximum permitted trailed weights 4 3
2 7 6 Road use 4 4
2 7 7 Parking brake 4 6
2 7 8 Power take-off 4 6
2 7 9 lmplements 4 7
2 7 1 0 Front-end loader 4 9
2 8 Specific safety instructions for servicing the tractor 50
2 8 1 Pollution warning to observe when servicing the tractor 50
2 8 2 General instructions 50
2 8 3 Handling instructions 51
2 8 4 Special instructions for cleaning the tractor 53
2 9 Protective structures 54
2 9 1 Protective structures – Use and accreditation 54
2 9 2 СаЬ 54
2 9 3 Seat belt 54
Operation – МТ400Е
АСТОО1910А
ТаЬ/е of contents
2 9 4 lnstructor seat 5 5
2 1 О Warranty 56
2 10 1 General 5 6
2 10 2 Pre-delivery inspection and commissioning оп the user’s premises 5 6
2 10 3 Warranty procedure 5 6
2 10 4 Procedure to follow if changing region 5 6
2 10 5 Servicing during and after the warranty period 5 7
2 10 6 California emission control warranty statement 5 7
2 10 7 Emission reduction warranty statement for the United States and Canada 60
3 Usage 65
3 1 Operator environment 69
3 1 1 Steering console 69
3 1 2 lnstrument panel 70
3 1 3 Control unit 76
3 1 4 Pedals 77
3 1 5 Steering wheel 77
3 1 6 Operator presence detector 7 8
3 1 7 Automatic adjustment pneumatic seat 82
3 1 8 lnstructor seat 8 8
3 1 9 Right-hand console 89
3 1 1О Command Control Armrest 89
3 1 1 1 Right-hand pillar 91
3 1 12 Left-hand console 92
3 1 1 3 Upper console 93
3 1 1 4 Manual air conditioning 9 4
3 1 1 5 Automatic air conditioning 98
3 1 16 Additional heater 10 5
3 1 17 Accessories sockets 10 5
3 1 1 8 Emergency exits 10 7
3 1 19 Sun visor 10 7
3 1 2 0 Wheel chock(s) (optional) 10 8
3 2 Setup and lnformation Screen control screens оп the instrument
panel 110
3 2 1 Using the Setup and lnformation Screen 1 1О
3 2 2 Setup and lnformation screens 1 1 1
3 3 Body 124
3 3 1 Opening the bonnet 12 4
3 3 2 Adjusting the external rear-view mirrors 12 4
3 3 2 1 Positioning the arms 12 4
3 3 2 2 Adjusting the arm extensions (depending оп model) 12 5
3 3 2 3 Rear-view mirror with manual adjustment 12 5
3 3 2 4 Rear-view mirror with electric adjustment 12 5
3 4 Engine 127
3 4 1 Running-in 127
3 4 2 Filling with fuel 127
3 4 3 Start switch 129
3 4 4 Start-up 129
3 4 5 Starting the Tier 4F/ Stage IV SCR Technology engine in cold weather 1 30
3 4 6 lnformation оп the different operating modes of the Tier 4F/ Stage IV SCR
Technology engine 1 3 2
3 4 7 Stopping the engine 1 3 7
3 4 8 Engine speed 1 3 7
3 4 9 Storing engine speeds 1 3 9
3 5 Transmission 141
3 5 1 Presentation of the different driving modes 1 4 1
3 5 2 Clutch function 1 4 1
Operation – МТ400Е
АСТОО1910А
ТаЬ/е of contents
3 5 3 PowerShuttle 1 4 3
3 5 4 Setting start-up speeds 1 4 5
3 5 4 1 Start speeds 1 4 5
3 5 5 Storage of forward speeds 1 46
3 5 6 Engine underspeed supervisor 1 4 8
3 5 7 Lever mode 1 4 8
3 5 8 Pedal mode 1 5 0
3 5 8 1 Pedal Mode in winter conditions (оп frozen ог snow-covered ground) 1 5 3
3 5 9 Self-propelled mode 1 5 3
3 5 1 О Road mode (Hare)/ Field mode (Tortoise) 1 5 4
3 5 1 1 Changing forward speed 1 5 5
3 5 1 2 Tractor towing 1 5 6
3 5 1 3 Tractor limp home mode 1 5 7
3 5 1 4 Forward speed calibration 1 5 9
3 6 Brakes 161
3 6 1 Brake pedals 161
3 6 2 Hydraulic trailer brake 161
3 6 3 Pneumatic trailer brake 162
3 6 4 Parking brake 163
3 7 Steering 165
3 7 1 Steering 165
3 8 Front axle 168
3 8 1 Four-wheel drive front axle 168
3 8 2 Suspended front axle 169
3 8 3 PermissiЫe load оп the front axle 17 1
3 9 Differential lock 174
3 9 1 Differential lock 17 4
3 1 0 Power take-off 176
3 10 1 Front power take-off 176
3 10 2 Rear power take-off (РТО) 176
3 10 2 1 Selecting the power take-off speed 177
3 10 2 2 Engaging РТО in manual mode: 17 8
3 10 2 3 Engaging РТО in automatic mode: 17 8
3 10 3 Economy РТО 179
3 10 4 Changing the flanged shaft 1 80
3 10 4 1 Changing the shaft 1 80
3 10 5 РТО external control 1 8 1
3 10 6 Power take-off electronic controls 1 8 2
3 10 7 Power take-off protection 1 8 2
3 1 1 Linkage 184
3 1 1 1 General 1 8 4
3 1 1 2 Rear linkage electronic controls 1 8 4
3 1 1 3 Rear linkage operation 1 86
3 1 1 4 Rear linkage external controls 191
3 1 1 5 Front linkage 191
3 1 1 6 Тор link 197
3 1 1 7 Bottom links 199
3 1 1 8 Lift rods 20 0
3 1 1 9 Stabilizers 20 2
3 1 1 9 1 Stabilizers with manual telescopic adjustment 20 2
3 1 1 9 2 Stabilizers with shoes 20 3
3 1 1 1О Ball joint support 20 4
3 1 2 Towing equipment 205
3 12 1 General 20 5
3 12 2 Swinging drawbar 20 7
Operation – МТ400Е
АСТОО1910А
3 12 2 1 Fitting the swinging drawbar 20 8
ТаЬ/е of contents
З 1 3 Auxiliary hydraulics 210
3 13 1 General 210
3 13 2 Description of hydraulic couplers оп Closed Center system (Load Sensing) 21О
3 13 3 Use of hydraulic couplers оп Closed Center system (Load Sensing) 212
3 13 4 Auxiliary hydraulics locking/unlocking 217
3 13 5 Hydraulics control lever 218
3 13 6 Description and use of the саЬ controls 219
3 13 7 Description and use of the external controls 226
3 13 8 Setting flow rates and time delay 226
3 13 9 Emergency manual spool valve control 228
З 1 4 Standard front-end loader function 229
3 14 1 Front-end loader 229
3 14 2 Layout of components 229
3 14 3 Standard front-end loader connection 230
3 14 4 Using the electric joystick of the standard front-end loader 23 1
3 14 4 1 Joystick functions for the standard front-end loader 23 1
3 14 4 2 Floating position with the standard front-end loader 23 2
3 14 4 3 Displaying the flow rates of the standard front-end loader 23 2
3 14 4 4 Arm suspension оп the standard front-end loader 23 4
3 14 4 5 Locking and unlocking standard front-end loader accessories 23 4
3 14 4 6 Standard front-end loader/engine speed automation 23 5
3 14 4 7 3rd and 4th functions of the standard front-end loader 23 5
3 14 4 8 Automatic shaking function of the standard front-end loader implement 23 6
З 1 5 Front-end loader function with Зrd function option 237
3 15 1 Front-end loader 23 7
3 15 2 Layout of components 23 7
3 15 3 Front-end loader connection with 3rd function option 23 8
3 15 4 Using the front-end loader electric joystick with the 3rd function option 23 9
3 15 4 1 Joystick functions for the front-end loader with the 3rd function option 23 9
3 15 4 2 Floating position of the front-end loader with the 3rd function option 240
3 15 4 3 Displaying the front-end loader flow rates with the 3rd function option 240
3 15 4 4 Arm suspension оп the front-end loader with the 3rd function option 24 2
3 15 4 5 Locking and unlocking front-end loader accessories with the 3rd function
option 24 2
3 15 4 6 Front-end loader/engine speed automation with the 3rd function option 24 3
3 15 4 7 Automatic shaking function for the front-end loader implement with the
3rd function option 24 3
3 15 5 Unhitching the front-end loader with the 3rd function option 24 3
З 1 6 Lighting 245
3 16 1 Main lighting control module 24 5
3 16 2 Work lights module 24 6
3 16 3 Direction indicators 24 7
З 1 7 Suspended саЬ 251
3 17 1 Suspended саЬ 25 1
З 1 8 Front tires and track widths 254
3 18 1 Wheel studs 25 4
3 18 2 1 nstallation points of the axle stands 25 4
3 18 3 Adjusting the front wheel track width 25 5
3 18 4 Adjusting the 4WD front axle stops 25 8
3 18 4 1 Fitting the oscillation stops 25 8
3 18 4 2 Adjusting the steering angle 25 8
3 18 4 3 Toe-in check 25 9
3 18 4 4 Adjusting the front fenders Shoe side adjustment оп the front axle 25 9
3 18 4 5 Adjusting the front fenders Adjusting the height of the support оп the
shoe 260
3 18 4 6 Adjusting the front fenders Adjusting the lateral position of the fender
оп the support (two adjustments аге possiЫe) 260
Operation – МТ400Е
АСТОО1910А
ТаЬ/е of contents
3 1 8 5 Tires 2 60
3 1 8 6 Tire pressures 2 60
3 1 9 Rear tires and track widths 261
3 19 1 Wheel studs 2 6 1
3 19 2 lnstallation points o f the axle stands 2 6 1
3 19 3 Rear track width with flanged shafts 2 62
3 19 4 Rear track width with short straight shafts 2 6 4
3 19 5 Rear track width with long straight shafts 2 67
3 19 6 Adjusting the геаг wheel track width 2 69
3 19 6 1 Adjustment of wheel position оп the straight shaft 270
3 19 6 2 Adjustment of wheel position оп the straight shaft 270
3 20 Dual wheels 272
3 20 1 Dual wheels 272
3 20 2 lnstallation points of the axle stands 27 3
3 20 3 Dual геаг wheel track width with long straight shafts 27 4
3 21 Ballast 280
3 2 1 1 Liquid ballasting 2 80
3 2 1 2 Front-end weight 2 80

CHALLENGER MT400E SERIES MT 465E MT 475E MT 485E MT 495E TECHSTAR CVT DELUXE & PREMIUM VERSIONS OPERATOR MANUAL ACT001910A:

PLEASE NOTE:

• This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
• This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
• Require some other service manual or have any queries: please WRITE to us at [email protected]’

S.V