Challenger MT955E MT965E MT975E Articulated Tractors Operator Manual 582773D1C

Description

Challenger MT955E MT965E MT975E Articulated Tractors Operator Manual 582773D1C – PDF DOWNLOAD

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

Challenger MT955E MT965E MT975E Articulated Tractors Operator Manual 582773D1C – PDF DOWNLOAD

МТ955Е
AGCC0955xGxxx1001-
МТ965Е
AGCC0965xGxxx1001-
МТ975Е
AGCC0975xGxxx1001-

Operator Manual :

• This operator manual uses the latest information availaЫe at the time of puЫication. Read the operator manual carefully before operating the machine. Right-hand and left-hand, as used in the operator manual, is determined Ьу facing the direction that the machine travels when in use.
• Photos, illustrations, and data used in the operator manual were current at the time of puЬlishing. Because of possiЫe production changes, each machine сап vary. Manufacturer reserves the right to redesign and change the machine as necessary without notification.

Important safety information :

When replacement parts are required for this product, AGCO recommends using AGCO replacement parts or parts with equivalent specifications including, but not limited to, physical dimensions, type, strength and material. Failure to heed this warning сап get untimely failures, product damage, personal injury or death. Failure to оЬеу basic safety rules and precautions сап cause personal injuries during product operation, maintenance, or repair. Know dangerous situations before an injury occurs. А person must Ье alert to possiЫe dangers.

• This person must also have the necessary training, skills and tools to do these operations correctly. lncorrect operation, lubrication, maintenance or repair of this product сап Ье dangerous and сап result in injury or death. Read and understand all the information about the operation, lubrication, maintenance, and repair before operating оп this machine. The product and this manual give safety precautions and warnings.
• Bodily injury or death сап occur to you or to other persons if all warnings аге not heeded. Not every possiЫe circumstance that сап involve а potential danger сап Ье anticipated. The warnings in this publication and оп the product аге, thus, not all inclusive. lf а tool or procedure, not recommended Ьу AGCO, is used, make sure they are safe for everyone. An operator must make sure the product will not Ье dangerous or damaged Ьу the operation, lubrication, maintenance or repair procedures selected.
• Information, specifications, and illustrations in this publication соте from information availaЫe at the time of publication production. Specifications, torques, pressures, measurements, adjustments, illustrations, and other items сап change at any time. These changes сап change the service that is given to the product. Get the complete and most current information before starting а job. AGCO dealers have the most current information available.

FILE DETAILS:

Challenger MT955E MT965E MT975E Articulated Tractors Operator Manual 582773D1C – PDF DOWNLOAD

Size : 52.8 MB
Format : PDF
Language : English
Brand: Challenger EU
Type of machine: Agricultural-Tractor
Type of document: Operator Manual
Model: Challenger EU MT955E MT965E MT975E Tractor
Date: 2017
Number of Pages: 348 Pages
Serial Number: AGCC09X5XGXXX1001 and Later
Part Number: 582773D1C

TABLE OF CONTENTS:

Challenger MT955E MT965E MT975E Articulated Tractors Operator Manual 582773D1C – PDF DOWNLOAD

1 Safety 11
1 1 Safety information 13
1 1 1 Operator Manual 1 3
1 1 2 lmportant safety information 1 3
1 1 3 Safety symbol 14
1 1 4 Safety messages 14
1 1 5 lnformation messages 14
1 1 6 Safety signs 14
1 1 7 General hazard information 1 5
1 1 8 Pressurized air 16
1 1 9 Asbestos information 16
1 1 1 О Electrical storm injury prevention 16
1 1 1 1 Mounting and dismounting the machine 16
1 1 1 2 Before starting the engine 1 7
1 1 1 3 Engine starting 1 7
1 1 14 Before operation 1 7
1 1 1 5 Operating procedures 1 7
1 1 16 Parking 1 8
1 1 1 7 Operator station 1 8
1 1 1 8 Cut and crushing prevention 1 9
1 1 1 9 Rollover protective structure 1 9
1 1 20 Batteries 20
1 1 21 Burn prevention 21
1 1 22 Coolant 21
1 1 23 Oils 21
1 1 24 High pressure lines 21
1 1 25 Fluid penetration 22
1 1 26 Exhaust fumes 22
1 1 27 Noise prevention 23
1 1 28 Fire and explosion prevention 23
1 1 29 Fire extinguisher 24
1 1 30 PuЫic road transportation 24
1 2 Safety signs and labels 25
1 3 Engine safety signs 26
1 3 1 Engine oil filter 27
1 3 2 Belt routing 27
1 3 3 lnformational – саЬ air conditioning 27
1 3 4 Separator filter 27
1 3 5 Fuel filter 28
1 3 6 Hot surface 28
1 3 7 High pressure hazard 28
1 3 8 Entanglement 29
1 3 9 Entanglement 29
1 3 1 О Run over hazard 29
1 3 1 1 Fuel filter 29
1 3 1 2 Separator filter 30
1 3 1 3 lnformational – engine air cleaner 30
1 3 14 Engine oil filter 30
1 3 1 5 Ether 30
1 3 16 Hot pressurized coolant 3 1
1 3 1 7 Engine oil sign 3 1
1 3 1 8 No step 3 1
Articulated Tractor
58277301С
ТаЬ!е of contents
1 4 Chassis safety signs 32
1 4 1 Grease points 3 3
1 4 2 Engine cover support 3 3
1 4 3 Radiation hazard 3 3
1 4 4 Ultra low sulfur diesel fuel 3 3
1 4 5 Tiedown 3 4
1 4 6 Lift 3 4
1 4 7 Articulation lock 3 4
1 4 8 Pinching hazard 3 4
1 4 9 Fall hazard 3 5
1 4 1О Crush hazard 3 5
1 4 11 Rear rollover hazard 3 5
1 4 12 Power take off 3 5
1 4 1 3 No step 3 6
1 5 СаЬ safety signs 37
1 5 1 Bystander notification 3 8
1 5 2 Operators manual 3 8
1 5 3 Wiper mirror 3 8
1 5 4 Door handle 3 8
1 5 5 Fall off hazard 3 9
1 5 6 Park brake 3 9
1 5 7 lnstallation date 3 9
1 5 8 Alternate exit 3 9
1 6 Hydraulic safety signs 40
1 6 1 Transmission gauge 4 1
1 6 2 Transmission oil fill level 4 1
1 6 3 Hydraulic fill 4 1
1 6 4 Hydraulic couplers 4 1
1 6 5 Transmission oil fill 4 2
1 6 6 Transmission / hydraulic oil filter 4 2
1 6 7 Hydraulic oil filter 4 2
1 6 8 Oil level 4 2
1 7 Electrical safety signs 43
1 7 1 Rear terminal mini fuse relay 4 4
1 7 2 Fuse/relays 4 4
1 7 3 Electrical hazard 4 4
1 7 4 Battery explosion 4 4
1 7 5 12 volt 4 5
1 7 6 Electrical ground 4 5
1 7 7 Wire access 4 5
1 7 8 Battery shut off 4 5
2 lntroduction 47
2 1 Machine identification МТ900Е 49
2 2 Serial number definition 51
2 3 lntended use 53
2 4 Proper disposal of waste 54
2 5 Pre-Delivery 55
2 5 1 Pre-delivery checklist 5 5
2 6 Emissions warranty – Tier IV final 56
2 6 1 United States and Canada emission control warranty statement 5 6
2 6 2 California emission control warranty statement 5 9
3 Operation 63
3 1 General inspection 67
3 1 1 Walk-around inspection 6 7
Articulated Tractor
58277301С
ТаЬ!е of contents
3 2 Starting engine 69
3 2 1 Pre-start checks 6 9
3 2 2 Engine starting 6 9
3 2 3 Engine starting in normal conditions 6 9
3 2 4 Engine starting with jumper саЫеs 7 0
3 3 Engine start switch 71
3 4 Engine operation with по load or low load 72
3 5 Monitor mounting bar 73
3 6 Lamp switches 74
3 6 1 Multifunction light switch оп the steering column 7 4
3 6 2 Extremity lamps 7 5
3 6 3 lnterior lamps 7 5
3 6 4 Courtesy lamp 7 5
3 6 5 СаЬ switches 7 6
3 6 6 Exterior courtesy lamps 7 7
3 6 7 Lighting shutdown delay 7 7
3 6 8 Rotating beacon 7 8
3 6 9 Backlighting for switches i n the саЬ 7 8
3 7 Dash panel 79
3 8 Steering wheel 82
3 8 1 Horn 8 2
3 8 2 Steering wheel tilt lever 8 2
3 9 Mirrors 83
3 9 1 lnside геаг view mirror 8 3
3 9 2 Outside геаг view mirrors 8 3
3 10 Radio 84
3 1 0 1 Blue tooth microphone 8 4
3 11 Storage and literature compartments 85
3 12 Operator seat 86
3 12 1 Armrest adjustment 8 6
3 12 2 Standard operator seat 8 6
3 12 3 Deluxe heated – vented seat 8 8
3 12 4 lnstructor seat 9 0
3 12 5 Seat belts 9 0
3 12 6 Operator presence functionality 9 1
3 13 Storage compartment and tool Ьох 92
3 14 Heating and air conditioning controls 93
3 14 1 Automatic temperature controls 9 3
3 14 2 Manual temperature control system 9 4
3 15 Vent locations 95
3 16 Machine management center 96
3 16 1 Terminal 9 6
3 16 2 Machine management center version information 9 7
3 16 3 Setting the measurement units 9 7
3 16 4 Setting the language 9 9
3 16 5 Setting the decimal display 10 0
3 16 6 Set the time and date 10 0
3 16 7 Terminal settings 1 0 1
3 16 8 Applications 10 3
3 16 9 Selecting an auxiliary input 1 0 4
3 16 1О Viewing screens 10 5
3 16 1 1 Engine 10 5
3 16 12 Transmission 1 0 7
3 16 13 Hydraulic 10 8
3 16 14 Powertrain protection software (P PS) 1 0 9
Articulated Tractor
58277301С
ТаЬ!е of contents
3 16 15 Measure I NST (instantaneous) 1 0 9
3 16 16 Measures – field 11О
3 16 17 Measures – fuel 111
3 16 18 Memory 111
3 16 19 Power management 114
3 16 2 0 Tractor settings 115
3 16 2 1 Slip alarm 116
3 16 22 ISO 1 1 7 8 3 Class 3 117
3 16 2 3 Service intervals 118
3 16 2 4 Headland management 122
3 16 2 5 Headland management icon identification 12 5
3 16 2 6 DTC (diagnostic trouЫe codes) stored or active 12 7
3 16 2 7 3-point linkage 12 8
3 16 2 8 Slip calibration 13 0
3 16 2 9 lnching pedal calibration 13 2
3 16 3 0 Radar calibration 13 3
3 16 3 1 EnaЫing the video camera – software version 3 2 and before 13 5
3 17 Air system operation 136
3 17 1 Air system operation 13 6
3 17 2 Air hose connection 13 6
3 18 Machine control 137
3 18 1 Throttle control 13 7
3 18 2 Decelerator – if equipped 13 7
3 18 3 Power management 13 7
3 18 4 Differential lock – if equipped 13 8
3 18 5 Transmission control 13 8
3 18 6 Machine ground speeds 13 9
3 18 7 Transmission control lever 13 9
3 18 8 Transmission shifting diagram 14 0
3 18 9 Preselecting а gear before moving 14 0
3 18 1О Using of the inching clutch control 14 0
3 18 1 1 Operating the shuttle shift 14 1
3 18 12 Speed matching 14 1
3 18 13 lnching pedal control 14 2
3 18 14 Brake control 14 2
3 18 15 Service brakes 14 3
3 18 16 Hydraulic trailer brake if equipped 14 3
3 18 17 Park brake 14 4
3 18 18 Manual parking brake handle 14 4
3 19 Overweight protection strategy (OWPS) 146
3 20 Hydraulic controls 147
3 2 0 1 Hydraulic control valve operation 14 7
3 2 0 2 Roading lockout switch for the hydraulic control levers 14 9
3 21 General hydraulic connections 150
3 2 1 1 General hydraulic connections 15 0
3 2 1 2 Connecting the hoses to the quick couplers 15 0
3 2 1 3 Disconnecting the hoses from the quick couplers 15 1
3 2 1 4 Hydraulic flow management 15 1
3 2 1 5 Hydraulic motors 15 1
3 2 1 6 Selection of hydraulic motors 15 1
3 2 1 7 Single acting cylinders 1 5 2
3 2 1 8 Checking а douЫe acting cylinders 1 5 2
3 2 1 9 Connecting hydraulic motors t o the control valves 1 5 2
3 2 1 1О Connecting а grain cart with an auger motor 15 3
3 2 1 1 1 Semi – mounted vacuum planter with the lift assist wheels 15 4
3 2 1 12 Connecting the vacuum planter 15 5
3 2 1 13 Connecting the air seeder or the grain drill 15 5
Articulated Tractor
58277301С
ТаЬ!е of contents
3 21 14 Connecting the spray system pump 15 7
3 21 15 Connecting the auxiliary implement controls 15 7
3 21 16 Hydraulic power beyond 15 8
3 21 17 Connecting а hydraulic motor to power beyond 15 8
3 21 18 Connecting the auxiliary implement control valve with load sensing 15 9
3 21 19 Connecting the auxiliary implement control valve without load sensing 15 9
3 21 20 Auxiliary implement control valve bank 15 9
3 21 21 Connecting the hydraulic motor with the flow control valve 160
3 22 Electrical system 161
3 22 1 Radar unit 161
3 22 2 Radar connector 161
3 22 3 Battery disconnect switch 162
3 22 4 Single pole connectors 162
3 22 5 Auxiliary power switch 162
3 22 6 Trailer connector 163
3 22 7 Routing the implement саЫе 163
3 22 8 ISO 117 8 3 connector 163
3 23 Machine performance 165
3 24 Towing and transportation 166
3 24 1 Roading the machine 166
3 24 2 Roading with а 3-point linkage mounted implement 167
3 24 3 Basic towing 167
3 24 4 Towing а stuck machine 168
3 24 5 Towing а machine with а dead engine 168
3 24 6 Accumulator without pressure 169
3 24 7 Transporting the machine 17 0
3 25 3-point linkage 171
3 25 1 Connecting the implement to the 3-point linkage 17 1
3 25 2 Disconnecting the implement from the 3-point linkage 17 1
3 25 3 Connecting the implement to the quick hitch 17 1
3 25 4 Disconnecting the implement from the quick hitch 17 3
3 25 5 Console controls 17 3
3 25 6 3-point linkage 17 3
3 25 7 Adjusting the 3-point linkage control lever 17 4
3 25 8 Raise/lower switch for the 3-point linkage 17 5
3 25 9 External 3-point linkage switch 17 5
3 25 1О lmplement leveling 175
3 25 11 Adjusting the top link 17 6
3 25 12 Adjusting the draft arm 17 6
3 25 13 Lift linkages and quick hitch 17 6
3 25 14 Setting the 3-point linkage side sway 17 7
3 26 Drawbar 179
3 26 1 Drawbar 17 9
3 26 2 Connecting drawbar implements 17 9
3 26 3 Safety chain 18 0
3 26 4 Adjusting the drawbar position 18 1
3 26 5 Replacing the wear plates and the rubber stops оп the standard drawbar 18 1
3 27 lmplement drive system 18 2
3 27 1 Operating the power take-off 18 2
3 27 2 Power take-off shaft 18 3
3 27 3 Connecting the power take-off implements 18 3
3 28 Ballasting 184
3 28 1 Ballasting guide lines 18 4
3 28 2 General guide lines 18 4
3 28 3 Tire pressure 18 4
3 28 4 Power hop control 18 4
3 28 5 Ballasting recommendations for the special application machine 18 5
Articulated Tractor
58277301С
ТаЬ!е of contents
3 28 6 Weight splits 18 5
3 28 7 Ballasting packages 18 5
3 28 8 Heavy vertical hitch loads 18 7
3 28 9 Ballasting work sheet 18 9
3 28 1О Tire inflation guide 19 2
3 28 11 Calculating wheel slippage for machines without а speed sensor 19 6
3 28 12 Removing the front weights 19 7
3 28 13 lnstalling the front weights 19 9
3 28 14 Removing the wheel weights 20 2
3 28 14 1 227 kg ( 5 0 0 IЬ) 20 2
3 28 14 2 3 64 kg ( 8 0 0 lb) 20 4
3 28 15 lnstalling the wheel weights 20 4
3 28 15 1 227 kg ( 5 0 0 lb) 20 4
3 28 15 2 3 64 kg ( 8 0 0 lb) 20 5
3 29 Special applications 208
3 29 1 Special applications drawbars and hitches 20 8
3 29 2 Ballasting for towed scrapers 20 8
3 29 3 Hydraulic connections for the towed scraper 20 8
3 29 4 Towed scraper general guide lines 20 9
3 29 5 Loading the scraper 20 9
3 29 6 Loading the tandem scraper 21О
3 29 7 Hauling the scraper 210
3 29 8 Dumping the scraper 21О
3 29 9 Towing а stuck scraper 21О
3 30 Aftermarket equipment applications 211
3 3 0 1 Chemical tank attachment 211
4 Maintenance 21 з
4 1 Lubricant viscosities and refill capacities 215
4 1 1 Lubricant viscosities for ambient temperatures 215
4 1 2 Lubricant viscosities 215
4 1 3 Fill capacities 215
4 2 Service intervals 216
4 2 1 Maintenance chart 216
4 2 2 Maintenance schedule 217
4 3 Fuse panel 219
4 3 1 Main fuse panel 219
4 3 2 Fuse Ыосk one 220
4 3 3 Fuse Ыосk two 221
4 3 4 Fuse relay Ыосk one 222
4 3 5 Fuse relay Ыосk two 223
4 3 6 Relay and fuse panel for chassis 223
4 3 7 Main fuse 224
4 4 Engine 2 25
4 4 1 Checking the engine oil level 225
4 4 2 Changing the engine oil and oil filter 226
4 4 2 1 lnspecting used filters 228
4 4 3 Engine oil sample port 228
4 4 4 Engine belts 228
4 4 5 Replacing the engine air filter 229
4 4 6 Engine temperature 229
4 4 7 Opening the engine cover 23 0
4 5 Fuel system 2з1
4 5 1 Filling the fuel system 23 1
4 5 2 Prevent static discharge when fueling 23 2
4 5 3 Changing the prefilter and the fuel filters 23 2
4 5 4 Priming the fuel system 23 3
Articulated Tractor
58277301С
ТаЬ!е of contents
4 5 5 Draining water and sediment from the fuel tank 23 4
4 5 6 Fuel сар 23 5
4 5 7 Fuel tank breather 23 5
4 6 SCR system 236
4 6 1 Selective catalytic reduction (S C R) System 23 6
4 6 2 Supply module 23 6
4 6 3 Filling а diesel exhaust fluid tank 23 7
4 6 4 D EF storage and shelf life 23 7
4 7 Cooling system 238
4 7 1 Cleaning the cooling cores 23 8
4 7 2 Water valve shutoff 23 8
4 7 3 Checking the engine coolant level 23 9
4 7 4 Coolant sample 23 9
4 7 5 Coolant system fluid 23 9
4 7 6 Cooling system additives 24 0
4 7 7 Draining the engine coolant 24 0
4 7 8 Flushing the cooling system 24 1
4 7 9 Refilling the cooling system 24 1
4 7 1О Replacing the water temperature thermostat 24 2
4 8 Power train 243
4 8 1 Checking the power train fluid level – daily 24 3
4 8 2 Checking the power train system fluid level – 4 0 0 hours 24 3
4 8 3 Adding power train system fluid 24 4
4 8 4 Draining excess power train system fluid 24 4
4 8 5 Changing the power train system fluid 24 5
4 8 6 Cleaning the breather (transmission) 24 9
4 9 lmplement and steering hydraulic system 250
4 9 1 Checking the implement and steering system fluid level 25 0
4 9 2 Changing the implement and steering system fluid 25 0
4 9 3 Cleaning the breather (hydraulic reservoir) 25 3
4 1 О СаЬ filtration 254
4 10 1 Primary fresh air filter 25 4
4 10 2 Removing the primary air filter 25 4
4 10 3 Filter maintenance 25 4
4 10 4 Cleaning the filter 25 5
4 10 5 lnstalling the primary air filter 25 5
4 10 6 Recirculation filter 25 5
4 1О 7 Removing the recirculation filter 25 6
4 10 8 lnstalling the recirculation filter 25 6
4 11 Locking the articulation joint area 258
4 12 Grease point locations 259
4 12 1 Drivelines grease point locations 25 9
4 12 2 Steering cylinders grease point locations 25 9
4 12 3 Upper articulation grease point location 260
4 12 4 Lower articulation pin grease point location 260
4 12 5 Extremity arm pivots grease point locations 261
4 12 6 Power take-off grease point locations 261
4 1 З Wheels 262
4 13 1 Wheel removal 262
4 13 2 Removing the outside wheel 262
4 13 3 Removing the center wheel 263
4 13 4 Removing the inside wheel 264
4 13 5 Wheel installation 266
4 13 6 lnstalling the inside wheel 266
4 13 7 lnstalling the center wheel 269
4 13 8 lnstalling the outside wheel 27 2
4 13 9 Re-tor que the wheel and counterweight 27 3
Articulated Tractor
58277301С
ТаЬ!е of contents
4 14 Hub and collet 274
4 14 1 Rem oving the hub and c ollet 274
4 14 2 lnstalling the hub and c ollet 27 4
4 14 3 Hub spacing 27 6
4 15 Batteries 278
4 15 1 Rem oving the batteries 27 8
4 15 2 lnstalling the batteries 28 0
5 TrouЫeshooting 283
5 1 Heating and air conditioning trouЫeshooting 285
5 1 1 Retrieving diagn ostic inf ormati on fr om the aut omatic temperature c ontr ol unit 28 5
5 2 Electrical system trouЫeshooting 288
5 3 Brake trouЬleshooting 289
5 4 Engine trouЫeshooting 2 9 1
5 4 1 L ow diesel exhaust fluid (D E F)/Ad Blue ® level 29 6
5 5 Hydraulic trouЫeshooting 297
5 6 3-point linkage trouЬleshooting 299
5 7 Transmission trouЫeshooting 3 0 1
5 8 Auto-Guide trouЫeshooting 303
5 8 1 Aut o- Guide ready indicat or is n ot оп 3 0 3
5 8 2 Aut o- Guide ready indicat or is оп 3 0 4
5 8 3 Aut o- Guide de-activates during operati on 3 04
5 9 Machine Error Codes 306
5 9 1 Engine еггог c odes 3 0 6
5 9 2 Transmissi on еггог c odes 3 0 8
5 9 3 P V E D е ггог c odes 3 13
5 9 4 Armrest Е С М е ггог c odes 3 14
5 9 5 Auxiliary valve one Е С М еггог c odes 3 18
5 9 6 Auxiliary valve tw o Е С М е ггог c odes 3 18
5 9 7 Auxiliary valve three Е С М е ггог c odes 3 18
5 9 8 Auxiliary valve f our Е С М е ггог c odes 3 19
5 9 9 Auxiliary valve five Е С М е ггог c odes 3 19
5 9 1О Auxiliary valve six ЕСМ еггог codes 3 20
5 9 11 Fr ont lighting Е С М еггог c odes 3 20
5 9 12 R oof lighting Е С М е ггог c odes 3 21
5 9 13 Rear lighting Е С М еггог c odes 3 21
6 Specifications 323
6 1 Engine specifications – МТ900Е 3 2 5
6 2 Torque specifications 326
6 2 1 C onstant t or que h ose clamps 3 26
6 3 Machine dimensions МТ900Е 327
6 4 Machine specifications 330
6 4 1 Machine specifications МТ 9 0 0 Е 3 3 0
6 4 2 Shipping weights МТ 9 0 0 Е 3 3 2
6 5 Special tools 334
6 5 1 C ollet t or que wrench extensi on A G 3 3 227 3 3 3 4
6 5 2 Spacer t or que wrench extensi on A G 3 3 227 4 3 3 5
6 5 3 Single wheel b olt wrench A G 3 3 227 5 3 3 7
6 5 4 Wheel bolt 3 6m m wrench AG 3 3 2272 3 3 9
6 5 5 Wheel guide stud A G 3 3 23 11 3 4 0
7 lndex 341

CHALLENGER MT955E MT965E MT975E ARTICULATED TRACTORS OPERATOR MANUAL 582773D1C:

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

 S.V