CLAAS ARION 630C-620C-610C Operator’s manual – PDF DOWNLOAD

Description

CLAAS ARION 630C-620C-610C Operator’s manual – PDF DOWNLOAD

DESCRIPTION:

CLAAS ARION 630C-620C-610C Operator’s manual – PDF DOWNLOAD\

ABOUT THIS OPERATOR’S MANUAL

• This is the original operator’s manual. It will simply be referred to as the “operator’s manual” throughout this document This operator’s manual complies with the regulations currently in force in the first country the tractor has been delivered to. This operator’s manual contains the instructions for using, adjusting, servicing, cleaning and transporting the tractor.
• It is essential to be familiar with all of these instructions in order to: – Improve the performance of the tractor – Increase the tractor’s availability – Extend the service life of the tractor – Ensure the correct working conditions in terms of both safety and comfort If any maintenance operations are missed or if the tractor is used incorrectly, the following is possible: – An increased safety risk – Premature wear of the tractor – A reduction in tractor performance – Loss of output and time Have the tractor serviced regularly by an approved
• CLAAS distributor. This operator’s manual can be considered contractual. CLAAS has a policy of continuous technical improvement to all its products, and therefore reserves the right to change without notice and at any time the details contained in this operator’s manual. The description of the models contained in this operator’s manual was established from technical specifications known at the time this operator’s manual was written. The operator’s manual contains all of
• the equipment (standard or optional) that exists for these models. The presence of this equipment in the tractor depends on the tractor version and options chosen by the purchaser and the country of sale for this tractor. Servicing operations during the warranty period are mandatory; failure to carry them out will nullify the contractual warranty. Failure to observe the instructions for use and maintenance of the tractor as described in this operator’s manual definitively excludes any
• possibility of recourse to the CLAAS warranty system. The instruction and warning plates affixed to the tractor give important information about possible risks of use. Following these instructions will guarantee your safety! Front/rear tools have a separate operator’s manual. The CLAAS distribution network is available to respond to any questions that you may
• have relating to the content of this operator’s manual. Important information concerning this operator’s manual Important information concerning this operator’s manual appears at the end of the manual
• TABLE OF CONTENTS:

CLAAS ARION 630C-620C-610C Operator’s manual – PDF DOWNLOAD

A – IDENTIFICATION – CERTIFICATION – SAFETY
1 TRACTOR INFORMATION PLATE A 2
2 TRACTOR POWER LABEL A 4
3 MOTOR INFORMATION PLATE A 5
4 CAB IDENTIFICATION PLATE A 6
5 EUROPEAN REGULATION A 7
6 SAFETY A 8
61 SAFETY INSTRUCTIONS A 8
62 SAFETY STICKERS WITH WARNING PICTOGRAMS A 23
B – DRIVING POSITION
1 OPERATING AND WORKING ENVIRONMENT B 2
11 INSTRUMENTS AND CONTROLS (DRIVING POSITION) B 2
12 INSTRUMENTS AND CONTROLS (PANEL) B 3
13 STOWAGE AND ACCESSORIES B 4
2 LIGHTING, INDICATORS AND SAFETY B 5
21 DESCRIPTION B 5
22 LOW/HIGH BEAMS AND HORN B 8
23 WORKING LIGHTS AND ROTATING BEACON B 9
24 OVERHEAD LIGHT B 10
25 REAR VIEW MIRRORS B 10
26 WARNING TRIANGLE B 10
3 STARTING CONTACT B 12
4 SEATS B 13
41 DRIVER’S SEAT B 13
42 PASSENGER SEAT B 15
5 STEERING WHEEL B 16
6 INSTRUMENT PANEL B 17
61 DESCRIPTION B 17
62 OPERATION B 18
63 OPERATION B 21
64 CALIBRATION B 21
7 HINGED PANELS AND WINDOWS B 23
8 SIGHT B 26
9 HEATING – VENTILATION – MANUAL AIR CONDITIONING B 27
91 DESCRIPTION B 27
92 OPERATION B 27
ARION 630C-610C – 02/2012 – en
10 CAB SUSPENSION B 32
C – ELECTRICAL SYSTEM
1 CHARACTERISTICS C 2
2 TRAILER/IMPLEMENT LIGHT SOCKET C 3
3 ELECTRIC CABINET SUPPLY SOCKET C 5
4 PROVISION FOR THE INSTALLATION OF A CONTROL CASING IN THE CAB C 6
41 FITTING BOX MOUNTING C 6
42 CABLE ROUTING C 6
5 BATTERY C 7
51 BATTERY COMPARTMENT C 7
52 BATTERY MASTER SWITCH C 7
6 FUSES AND RELAYS C 9
61 RECOMMENDATIONS C 9
62 FUSE/PREHEAT RELAY C 9
63 MAIN FUSE BOX C 9
64 CAB TOP FUSE BOX C 13
D – ENGINE
1 CHARACTERISTICS D 2
2 DISPLAYS D 5
21 INSTRUMENT PANEL D 5
3 SAFETY D 6
31 OPERATION D 6
32 INSTRUMENT PANEL D 6
33 RECOMMENDATIONS D 6
4 ENGINE HOOD D 8
41 ONE-PIECE HOOD D 8
42 SIDE PANELS D 8
5 ENGINE CONTROL D 9
51 STARTING THE ENGINE D 9
52 ACCELERATOR CONTROLS D 12
53 STOPPING THE ENGINE D 13
6 FUEL D 14
61 RECOMMENDATIONS D 14
62 BLEEDING AIR FROM THE INJECTION SYSTEM D 15
ARION 630C-610C – 02/2012 – en
E – TRANSMISSION
GEARBOX
1 CHARACTERISTICS E 4
2 FORWARD SPEEDS E 5
3 DISPLAY E 8
4 SAFETY E 9
41 REVERSER NEUTRAL E 9
42 TRANSMISSION NEUTRAL E 10
43 PROTECTION OF MECHANICAL PARTS E 12
5 STARTING THE TRACTOR E 13
51 CLUTCH E 13
52 SELECTION OF MOVEMENT DIRECTION E 14
6 MANUAL GEAR CHANGES E 15
61 WORK MODE E 15
62 ROAD MODE E 16
63 START RATIO E 17
7 AUTOMATIC GEAR CHANGES E 19
71 AUTOMATIC SPEED ADAPTATION (SPEED MATCHING) E 19
8 RATIO MANAGEMENT E 20
9 CREEP GEAR RANGE E 21
91 OPERATION E 21
92 OPERATION E 21
REAR AXLE
1 CHARACTERISTICS E 24
2 DISPLAY E 25
3 PROTECTION OF MECHANICAL PARTS E 26
31 OPERATION E 26
4 DIFFERENTIAL LOCK E 27
41 RECOMMENDATIONS E 27
42 GENERAL E 27
43 DIFFERENTIAL LOCK E 27
5 BRAKES E 29
51 SERVICE BRAKES E 29
52 HANDBRAKE (AUXILIARY AND PARKING BRAKE) E 29
6 TRAILER BRAKE E 31
61 HYDRAULIC BRAKE E 31
62 PNEUMATIC BRAKE E 32
ARION 630C-610C – 02/2012 – en
F – FRONT AXLE
1 CHARACTERISTICS F 2
2 PROTECTION OF MECHANICAL PARTS F 4
3 FRONT AXLE ENGAGEMENT F 5
31 OPERATION F 5
32 AUTOMATIC MODE F 5
33 PERMANENT MODE F 6
G – REAR EQUIPMENT
HYDRAULIC SYSTEMS
1 CHARACTERISTICS G 4
2 AUXILIARY SPOOL VALVES G 7
21 ASSOCIATION BETWEEN CONTROLS/REAR PRESSURE CONNECTORS G 7
22 PRESSURE CONNECTORS G 10
23 CONTROLS G 12
24 CONTROL LEVERS G 13
25 HYDRAULIC FLOW BUILDUP SWITCH G 16
26 FLOW REGULATOR G 17
27 DUAL ACTING/SINGLE ACTING CONVERSION G 18
3 STATIONARY WORKING G 19
REAR LIFT
1 CHARACTERISTICS G 22
2 CONTROLS G 23
3 SAFETY G 25
31 PROTECTION OF MECHANICAL PARTS G 25
32 WARNING LIGHT G 25
33 ROAD TRANSPORT SAFETY G 25
4 USING THE LINKAGE G 26
5 MODE SELECTION G 27
6 POSITION CONTROL G 28
7 FORCE CONTROL G 29
8 UPPER LIMIT G 30
9 LOWERING SPEED G 31
10 TRANSPORT DAMPER G 32
11 EXTERNAL CONTROLS G 33
111 OPERATION G 33
112 OPERATION G 33
ARION 630C-610C – 02/2012 – en
REAR POWER TAKE-OFF
1 CHARACTERISTICS G 36
2 RECOMMENDATIONS G 37
3 OPERATION G 38
4 DISPLAY G 40
5 PTO SPEED SELECTION G 41
6 OPERATION G 42
7 POWER TAKE-OFF END FITTING G 43
8 CONNECTING IMPLEMENTS TO THE POWER TAKE-OFF G 44
9 STATIONARY WORKING G 45
REAR HITCH
1 CHARACTERISTICS G 48
2 RECOMMENDATIONS G 50
3 ADJUSTABLE LINKS G 52
4 UPPER LINK G 53
5 AUTOMATIC HOOKS G 54
6 STABILISERS G 56
61 OPERATION G 56
62 MECHANICAL STABILISERS G 56
7 DRAW BAR COUPLINGS G 57
8 SWINGING DRAWBAR G 59
9 AUTOMATIC PICK-UP HITCH G 61
H – FRONT EQUIPMENT
HYDRAULIC SYSTEMS
1 CHARACTERISTICS H 4
2 ASSOCIATION BETWEEN CONTROLS/FRONT PRESSURE CONNECTORS H 5
3 PRESSURE CONNECTORS H 7
31 RECOMMENDATIONS H 7
32 OPERATION H 7
33 FREE RETURN TO THE TANK H 8
34 OIL COLLECTION CAN H 8
ARION 630C-610C – 02/2012 – en
4 HYDRAULIC FLOW BUILDUP SWITCH H 9
FRONT LINKAGE
1 CHARACTERISTICS H 12
2 CONTROLS H 13
3 SAFETY H 14
31 SPECIAL INSTRUCTIONS H 14
4 PRELIMINARY OPERATIONS H 15
5 OPERATION H 18
6 3-POINT HITCH H 19
61 LOWER LINKS H 19
62 UPPER LINK H 20
63 HITCHING AND UNHITCHING THE TOOL H 21
FRONT POWER TAKE-OFF
1 CHARACTERISTICS H 24
2 RECOMMENDATIONS H 25
3 FRONT POWER TAKE-OFF ENGAGEMENT H 26
4 STOP OF THE FRONT POWER TAKE-OFF H 27
5 ADJUSTMENT H 28
FRONT LOADER
1 FITTING A FRONTAL LOADER ADAPTATION FRAME H 32
2 OPERATION H 34
J – WHEELS AND TYRES
1 TYRES J 2
11 RECOMMENDATIONS J 2
12 INFLATION PRESSURE J 2
13 LOAD INDEX J 4
14 SPEED CODE J 5
2 TRACK WIDTHS J 6
21 SETTING THE TRACK J 6
22 FRONT TRACKS J 8
23 REAR TRACKS J 15
24 TYRE COMBINATIONS J 22
ARION 630C-610C – 02/2012 – en
3 WHEELS J 23
K – CHARACTERISTICS
1 DIMENSIONS K 2
2 WEIGHT K 3
3 LOAD-BEARING CAPABILITIES K 4
4 MAXIMUM TOW WEIGHT AUTHORIZED K 5
5 CAPACITIES K 6
6 BALLAST K 7
61 BALLASTING AVAILABLE K 7
62 TRACTOR BALANCING K 9
7 CAB COMFORT K 12
71 SOUND LEVEL K 12
72 VIBRATION LEVEL K 13
L – MAINTENANCE
1 RECOMMENDATIONS L 2
2 TOWING L 8
3 TRANSPORT L 9
4 USING A JACK L 10
5 REPLACING A WHEEL L 11
6 LOADING AND STOWING THE TRACTOR L 12
7 STORAGE L 13
8 DECOMMISSIONING AND DESTRUCTION L 15
9 FREQUENCIES L 16
91 SUMMARY TABLE L 16
92 OPERATIONS L 20
10 BLEEDING AIR FROM THE INJECTION SYSTEM L 62
11 MAINTENANCE LOGBOOK L 63
M – OPERATIONS THAT ARE MANDATORY UNDER THE GUARANTEE
1 OPERATIONS MANDATORY UNDER THE TERMS OF THE CONTRACTUAL GUARANTEE
M 2
11 PRE-DELIVERY INSPECTION M 2
12 HANDING OVER TO THE CUSTOMER M 2
13 MANDATORY ROUTINE MAINTENANCE M 2
14 MANDATORY INSPECTIONS M 3
ARION 630C-
IMAGES PREVIEW OF THE MANUAL:

CLAAS ARION 630C-620C-610C OPERATOR’S MANUAL – PDF DOWNLOAD:

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted

S.M