Claas ARION 640-630-620-610 C.I.S. ARION 540-530-520-510 C.I.S. Operator’s manual – PDF DOWNLOAD

Description

Claas ARION 640-630-620-610 C.I.S. ARION 540-530-520-510 C.I.S. Operator’s manual – PDF DOWNLOAD

DESCRIPTION:

Claas ARION 640-630-620-610 C.I.S. ARION 540-530-520-510 C.I.S. Operator’s manual – PDF DOWNLOAD

ABOUT THIS OPERATOR’S MANUAL

This is the original operator’s manual. It will simply be referred to as the “operator’s manual” throughout this document This operator’s manual complies with the regulations currently in force in the first country the tractor has been delivered to. This operator’s manual contains the instructions for using, adjusting, servicing, cleaning and transporting the tractor. It is essential to be familiar with all of these instructions in order to

– Improve the performance of the tractor
– Increase the tractor’s availability
– Extend the service life of the tractor
– Ensure the correct working conditions in terms of both safety and comfort
If any maintenance operations are missed or if the tractor is used incorrectly, the following is possible:
– An increased safety risk
– Premature wear of the tractor
– A reduction in tractor performance
– Loss of output and time

• Have the tractor serviced regularly by an approved CLAAS distributor. This operator’s manual can be considered contractual. CLAAS has a policy of continuous technical improvement to all its products, and therefore reserves the right to change without notice and at any time the details contained in this operator’s manual. The description of the models
• contained in this operator’s manual was established from technical specifications known at the time this operator’s manual was written. The operator’s manual contains all of the equipment (standard or optional) that exists for these models. The presence of this equipment in the tractor depends on the tractor version and options chosen by the purchaser and the
• country of sale for this tractor. Servicing operations during the warranty period are mandatory; failure to carry them out will nullify the contractual warranty. Failure to observe the instructions for use and maintenance of the tractor as described in this operator’s manual definitively excludes any possibility of recourse to the CLAAS warranty system. The instruction
• and warning plates affixed to the tractor give important information about possible risks of use. Following these instructions will guarantee your safety! Front/rear tools have a separate operator’s manual. The CLAAS distribution network is available to respond to any questions that you may have relating to the content of this operator’s manual.

TABLE OF CONTENTS:

Claas ARION 640-630-620-610 C.I.S. ARION 540-530-520-510 C.I.S. Operator’s manual – PDF DOWNLOAD

A – IDENTIFICATION – CERTIFICATION – SAFETY
1 TRACTOR INFORMATION PLATE A 2
2 TRACTOR POWER LABEL A 4
3 MOTOR INFORMATION PLATE A 5
4 CAB IDENTIFICATION PLATE A 6
5 EUROPEAN REGULATION A 7
6 SAFETY A 8
61 SAFETY INSTRUCTIONS A 8
62 SAFETY STICKERS WITH WARNING PICTOGRAMS A 23
B – CAB
1 OPERATING AND WORKING ENVIRONMENT B 2
11 INSTRUMENTS AND CONTROLS (DRIVING POSITION) B 2
12 INSTRUMENTS AND CONTROLS (PANEL) B 4
13 STOWAGE AND ACCESSORIES B 5
2 LIGHTING, INDICATORS AND SAFETY B 6
21 DESCRIPTION B 6
22 LOW/HIGH BEAMS AND HORN B 9
23 WORKING LIGHTS AND ROTATING BEACON B 10
24 OVERHEAD LIGHT B 11
25 REAR VIEW MIRRORS B 11
26 WARNING TRIANGLE B 12
3 STARTING CONTACT B 13
4 MULTIFUNCTION ARMREST B 14
5 SEATS B 15
51 DRIVER’S SEAT B 15
52 PASSENGER SEAT B 17
6 STEERING WHEEL B 19
7 INSTRUMENT PANEL B 20
71 DESCRIPTION B 20
72 OPERATION B 22
73 OPERATION B 25
74 CALIBRATION B 26
8 DISPLAY B 28
81 TRANSMISSION DISPLAY B 28
ARION 640-510 CIS – 02/2012 – en
9 HINGED PANELS AND WINDOWS B 29
10 SIGHT B 33
11 HEATING – VENTILATION – MANUAL AIR CONDITIONING B 34
111 DESCRIPTION B 34
112 OPERATION B 34
12 HEATING/VENTILATION/AUTOMATIC CLIMATE CONTROL B 39
121 DESCRIPTION B 39
122 OPERATION B 39
13 CAB SUSPENSION B 43
C – ELECTRICAL SYSTEM
1 CHARACTERISTICS C 2
2 TRAILER/IMPLEMENT LIGHT SOCKET C 3
3 ELECTRIC CABINET SUPPLY SOCKET C 4
4 EVENT COUNTER SOCKET C 5
5 ISO SOCKET C 6
6 ISOBUS SOCKET C 7
7 PROVISION FOR THE INSTALLATION OF A CONTROL CASING IN THE CAB C 8
71 FITTING BOX MOUNTING C 8
72 CABLE ROUTING C 8
8 BATTERY C 9
81 BATTERY COMPARTMENT C 9
82 BATTERY MASTER SWITCH C 10
9 FUSES AND RELAYS C 11
91 RECOMMENDATIONS C 11
92 CAB-MOUNTED SERVICES FUSE BOX C 11
93 CAB TOP FUSE BOX C 14
94 PRIMARY SERVICES FUSE BOX C 17
D – ENGINE
1 CHARACTERISTICS D 2
2 DISPLAYS D 8
21 INSTRUMENT PANEL D 8
3 SAFETY D 9
31 OPERATION D 9
32 INSTRUMENT PANEL D 9
33 RECOMMENDATIONS D 9
4 ENGINE HOOD D 11
41 ONE-PIECE HOOD D 11
42 SIDE PANELS D 11
ARION 640-510 CIS – 02/2012 – en
5 ENGINE CONTROL D 12
51 STARTING THE ENGINE D 12
52 USING THE ACCELERATOR PEDAL AND LEVER D 16
53 STOPPING THE ENGINE D 18
6 CLAAS POWER MANAGEMENT D 19
7 FUEL D 20
71 RECOMMENDATIONS D 20
72 BLEEDING AIR FROM THE INJECTION SYSTEM D 21
E – TRANSMISSION
GEARBOX
1 CHARACTERISTICS E 4
2 FORWARD SPEEDS E 5
3 DISPLAY E 18
31 TRANSMISSION DISPLAY E 18
32 INSTRUMENT PANEL E 18
4 SAFETY E 20
41 REVERSER NEUTRAL E 20
42 TRANSMISSION NEUTRAL E 22
43 PROTECTION OF MECHANICAL PARTS E 23
5 STARTING THE TRACTOR E 25
51 TRANSMISSION DISPLAY E 25
52 CLUTCH E 25
53 SELECTION OF MOVEMENT DIRECTION E 26
54 REVERSER PROGRESSIVITY ADJUSTMENT E 27
55 COUPLING/DECOUPLING FORWARD/REVERSE GEARS E 29
6 MANUAL GEAR CHANGES E 31
61 START RATIO E 31
62 WORK MODE E 32
63 ROAD MODE E 33
7 AUTOMATIC GEAR CHANGES E 35
71 SKIP SHIFT E 35
72 AUTOMATIC SPEED ADAPTATION (SPEED MATCHING) E 35
73 MANOEUVRING GEAR E 36
74 HEXACTIV E 38
8 RATIO MANAGEMENT E 44
81 OPERATION E 44
82 TRANSMISSION DISPLAY E 44
ARION 640-510 CIS – 02/2012 – en
9 CREEP GEAR RANGE E 45
91 OPERATION E 45
92 OPERATION E 45
REAR AXLE
1 CHARACTERISTICS E 48
2 DIFFERENTIAL LOCK E 51
21 RECOMMENDATIONS E 51
22 OPERATION E 51
23 AUTOMATIC MODE E 51
24 PERMANENT MODE E 52
3 PROTECTION OF MECHANICAL PARTS E 54
31 OPERATION E 54
32 INSTRUMENT PANEL E 54
33 TRANSMISSION DISPLAY E 54
4 BRAKES E 55
41 SERVICE BRAKES E 55
42 PARKING BRAKE E 55
43 HIGH PRESSURE BRAKING E 56
5 TRAILER BRAKE E 58
51 HYDRAULIC BRAKE E 58
52 PNEUMATIC BRAKE E 59
F – FRONT AXLE
1 CHARACTERISTICS F 2
2 PROTECTION OF MECHANICAL PARTS F 5
21 OPERATION F 5
22 INSTRUMENT PANEL F 5
3 FRONT AXLE ENGAGEMENT F 6
31 OPERATION F 6
32 AUTOMATIC MODE F 6
33 PERMANENT MODE F 7
4 SUSPENDED FRONT AXLE F 8
41 OPERATION F 8
42 FIXED MODE F 8
43 AUTOMATIC MODE F 9
ARION 640-510 CIS – 02/2012 – en
G – REAR EQUIPMENT
HYDRAULIC SYSTEMS
1 CHARACTERISTICS G 4
2 OPEN CENTRE SYSTEM G 6
21 ASSOCIATION BETWEEN CONTROLS/REAR PRESSURE CONNECTORS G 6
22 PRESSURE CONNECTORS G 8
23 CONTROLS G 10
24 CONTROL LEVERS G 10
25 FLOW DIVIDER G 12
26 DUAL ACTING/SINGLE ACTING CONVERSION G 12
3 CLOSED CENTRE CIRCUIT G 13
31 ASSOCIATION BETWEEN CONTROLS/REAR PRESSURE CONNECTORS G 13
32 PRESSURE CONNECTORS G 15
33 CONTROLS G 17
34 CONTROL LEVERS G 17
35 ADJUSTING FLOW RATE FOR MECHANICALLY-CONTROLLED SPOOL VALVES G 18
36 POWER BEYOND G 19
4 STATIONARY WORKING G 20
REAR LIFT
1 CHARACTERISTICS G 22
2 CONTROLS G 23
3 SAFETY G 25
31 PROTECTION OF MECHANICAL PARTS G 25
32 WARNING LIGHT G 25
33 ROAD TRANSPORT SAFETY G 25
4 USING THE LINKAGE G 27
5 MODE SELECTION G 28
6 POSITION CONTROL G 29
7 FORCE CONTROL G 30
8 UPPER LIMIT G 32
9 LOWERING SPEED G 33
10 TRANSPORT DAMPER G 34
11 ACTIVE WHEEL SLIP MANAGEMENT G 35
111 OPERATION G 35
112 ADJUSTMENT G 35
113 OPERATION G 36
ARION 640-510 CIS – 02/2012 – en
12 EXTERNAL CONTROLS G 37
121 OPERATION G 37
122 OPERATION G 37
REAR POWER TAKE-OFF
1 CHARACTERISTICS G 40
2 RECOMMENDATIONS G 41
3 CONTROLS G 42
4 DISPLAY G 43
5 PTO SPEED SELECTION G 44
6 OPERATION G 45
7 EXTERNAL CONTROLS G 46
8 OPERATION G 47
9 PTO AUTOMATION G 48
91 OPERATION G 48
92 ADJUSTMENT G 48
10 POWER TAKE-OFF END FITTING G 49
11 CONNECTING IMPLEMENTS TO THE POWER TAKE-OFF G 50
12 STATIONARY WORKING G 51
REAR HITCH
1 CHARACTERISTICS G 54
2 RECOMMENDATIONS G 56
3 ADJUSTABLE LINKS G 58
4 UPPER LINK G 59
41 MECHANICAL UPPER ROD G 59
42 UPPER TOP LINKAGE G 59
5 AUTOMATIC HOOKS G 60
6 STABILISERS G 62
61 OPERATION G 62
62 MECHANICAL STABILISERS G 62
63 SELF-LOCKING STABILISERS G 62
ARION 640-510 CIS – 02/2012 – en
7 DRAW BAR COUPLINGS G 63
8 SWINGING DRAWBAR G 65
9 TOW HOOK G 67
10 AUTOMATIC PICK-UP HITCH G 68
H – FRONT EQUIPMENT
HYDRAULIC SYSTEMS
1 CHARACTERISTICS H 4
2 FRONT PRESSURE TAPS CONTROLLED BY SPOOL VALVE 3 H 5
21 ASSOCIATION BETWEEN CONTROLS/FRONT PRESSURE CONNECTORS H 5
22 PRESSURE CONNECTORS H 5
23 OPERATION H 7
24 FLOW CONTROL H 8
3 FRONT PRESSURE TAPS CONTROLLED BY SPOOL VALVE 7 H 9
31 ASSOCIATION BETWEEN CONTROLS/FRONT PRESSURE CONNECTORS H 9
32 PRESSURE CONNECTORS H 9
33 SAFETY H 11
34 PRELIMINARY OPERATIONS H 12
35 OPERATION H 12
36 MANAGEMENT OF ELECTROHYDRAULIC SPOOL VALVES H 13
FRONT LINKAGE
1 CHARACTERISTICS H 18
2 FRONT LINKAGE CONTROLLED BY SPOOL VALVE 1 H 19
21 CONTROLS H 19
22 SAFETY H 19
23 PRELIMINARY OPERATIONS H 20
24 OPERATION H 22
3 FRONT LINKAGE CONTROLLED BY SPOOL VALVE 6 H 24
31 CONTROLS H 24
32 SAFETY H 25
33 PRELIMINARY OPERATIONS H 25
34 OPERATION H 28
35 EXTERNAL CONTROLS H 29
4 3-POINT HITCH H 30
41 LOWER LINKS H 30
42 UPPER LINK H 31
43 HITCHING AND UNHITCHING THE TOOL H 31
ARION 640-510 CIS – 02/2012 – en
FRONT POWER TAKE-OFF
1 CHARACTERISTICS H 36
2 DISPLAY H 37
3 RECOMMENDATIONS H 38
4 FRONT POWER TAKE-OFF ENGAGEMENT H 40
5 STOP OF THE FRONT POWER TAKE-OFF H 41
6 ADJUSTMENT H 42
FRONT LOADER
1 FITTING A FRONTAL LOADER ADAPTATION FRAME H 46
2 OPERATION H 48
I – CLAAS INFORMATION SYSTEM
1 DESCRIPTION I 2
2 OPERATION I 4
21 OPERATION I 4
22 MAIN MENU I 5
23 HYDRAULIC MENU I 6
24 ON-BOARD COMPUTER MENU I 8
25 TRANSMISSION WINDOW I 10
26 CONSUMPTION MENU I 12
27 MAINTENANCE MENU I 13
28 CONFIGURATION MENU I 18
J – WHEELS AND TYRES
1 TYRES J 2
11 RECOMMENDATIONS J 2
12 INFLATION PRESSURE J 3
13 LOAD INDEX J 4
14 SPEED CODE J 5
2 TRACK WIDTHS J 6
21 SETTING THE TRACK J 6
22 FRONT TRACKS J 8
23 REAR TRACKS J 28
24 TYRE COMBINATIONS J 40
ARION 640-510 CIS – 02/2012 – en
3 WHEELS J 41
K – CHARACTERISTICS
1 DIMENSIONS K 2
2 WEIGHT K 4
3 LOAD-BEARING CAPABILITIES K 6
4 MAXIMUM TOW WEIGHT AUTHORIZED K 8
5 CAPACITIES K 9
6 BALLAST K 11
61 BALLASTING AVAILABLE K 11
62 TRACTOR BALANCING K 14
7 CAB COMFORT K 17
71 SOUND LEVEL K 17
72 VIBRATION LEVEL K 18
L – MAINTENANCE
1 RECOMMENDATIONS L 2
2 TOWING L 8
3 TRANSPORT L 9
4 USING A JACK L 10
5 REPLACING A WHEEL L 11
6 LOADING AND STOWING THE TRACTOR L 12
7 STORAGE L 13
8 DECOMMISSIONING AND DESTRUCTION L 15
9 FREQUENCIES L 16
91 SUMMARY TABLE L 16
92 OPERATIONS L 20
10 BLEEDING AIR FROM THE INJECTION SYSTEM L 68
11 MAINTENANCE LOGBOOK L 69
M – OPERATIONS THAT ARE MANDATORY UNDER THE GUARANTEE
1 OPERATIONS MANDATORY UNDER THE TERMS OF THE CONTRACTUAL GUARANTEE
M 2
11 PRE-DELIVERY INSPECTION M 2
12 HANDING OVER TO THE CUSTOMER M 2
13 MANDATORY ROUTINE MAINTENANCE M 2
14 MANDATORY INSPECTIONS M 3
IMAGES PREVIEW OF THE MANUAL:

CLAAS ARION 640-630-620-610 C.I.S. ARION 540-530-520-510 C.I.S. OPERATOR’S MANUAL – PDF DOWNLOAD:

PLEASE NOTE:

• This is the SAME MANUAL used by the dealerships to diagnose your vehicle
• No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
• Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
• So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com

s.m