Claas Baler Rollant 66 160 Operator’s Manual_FR DE EN RU – PDF DOWNLOAD

Description

Claas Baler Rollant 66 160 Operator’s Manual_FR DE EN RU – PDF DOWNLOAD

DESCRIPTION:

Claas Baler Rollant 66 160 Operator’s Manual_FR DE EN RU – PDF DOWNLOAD

Introduction:

This manual contains information regarding the use, setting and operation of the Round Baler CLAAS ROLLANT 66. Provided you follow the advice on the care and servicing of your machine you will be rewarded with reliable operating efficiency and long service from your Round Baler.

• We recommend that you allow your local CLAAS Dealer to inspect and service your Round Baler immediately after the season, adhering to the recommended winter service schedule contained in this manual. Ommissions of parts of a service, or incorrect adjustments lead to a drop in performance and cost valuable time.
• By correct servicing and operation you can make full use of the latest technical knowledge and experience in mechanized handling of fodders and straw with which your machine has been designed, and thereby insure reliability of your CLAAS ROLLANT 66.

Important :

The instructions contained in this manual should be carefully read and observed by all persons who are concerned with the operation, maintenance and inspection of this machine, in order to prevent accidents. Especially the »SAFETY RULES« and the group »PRIOR TO OPERATION« in this manual should be read with utmost care and adhered to.

• The use of spare parts, accessories and ancillary equipment, which are not originally manufactured by CLAAS, can change the specified design characteristics of the CLAAS machine or can detract from its functional performance, with a possible adverse affect on the active and/or passive operational safety of the machine and its occupational safety standards (accident prevention).
• CLAAS are in no way liable for any damage or personal injury caused through the use of other than original or approved CLAAS parts, accessories and ancillary equipment. Technical data, dimensions and wheigts are given as an indication only. CLAAS reserve the right to make changes subsequently as technical developments continue. Responsibility for errors or ommissions not accepted.

TABLE OF CONTENTS:

Claas Baler Rollant 66 160 Operator’s Manual_FR DE EN RU – PDF DOWNLOAD

Important 4
Identification plate 9
Baler serial number 9
Safety rules 13
Safety decals with pictorials 19
1 Specifications
CLAAS ROLLANT 66/160 1 6
Safety devices 1 9
Basic components of the machine 1 15
Description and function 1 19
2 Before operation
Prior-to-operation check list and instructions 2 2
Baler hook-up 2 5
Drawbar for hook-up to the
tractor swinging drawbar 2 5
Drawbar hook-up to top-fitted jaw 2 7
Connecting the universal drive shaft to the baler 2 7
Attaching the universal drive shaft to the tractor 2 9
Connecting to the top-fitted tow jaw 2 9
Jack stand 2 11
Support wheel 2 11
Electrics 2 13
Hydraulic system 2 15
Pick-up crank 2 17
Ladder 2 17
Wheel chocks 2 17
Safety lock-up valve for tailgate 2 17
Bale discharge ramp 2 19
Deflectors for bale forming rollers 2 19
Remove deflectors for silage 2 19
Adjusting the deflectors 2 21
Adjustment of the axle 2 23
Before transporting the baler 2 25
3 Basic adjustments and operation
Pick-up 3 3
Hydraulic pick-up lift 3 3
Pick-up land wheel (1 58 m pick-up) 3 3
Transport and working position of pick-up 3 3
Pick-up land wheels (1 80 m pick-up) 3 5
Pick-up crop guard 3 5
Short crop baffle 3 5
Baling (Rollant 66) 3 7
Baling (Rollant 160) 3 9
Discharge 3 11
Bale counter (Rollant 66) 3 11
Bale counter (Rollant 160) 3 13
Wrapping 3 13
Net wrapping 3 13
Spare net roll 3 17
Operating the Rollatex net wrapping system
(Rollant 66 – Rollant 160) 3 19
Closing the tailgate 3 23
Cam-type cut-out clutch 3 23
Twine tying 3 23
Varying the wraps of twine around the bale end 3 29
Starting off the twine tying system 3 29
Operating with the
automatic starting device for twine tying
(Rollant 66 – option; Rollant 160 – standard) 3 29
Operating with the
manual starting device for twine tying (Rollant 66) 3 33
Tractors with a hydraulic system pressure
over 220 bar 3 35
Shear bolts / Slip clutch 3 35
Replacing the shear bolt 3 35
Flat belts (Extra equipment) 3 37
Problem, cause or remedy 3 43
4 Maintenance
Important maintenance instructions 4 3
Maintenance chart 4 6
Lubrication chart 4 6
Drive system 4 9
Angle drive gearbox 4 9
Pick-up drive 4 9
Tensioning drive chains 4 9
Adjusting the spring-loaded cylinders
to correct tension 4 11
Adjusting spring length of
net feed pressure roller 4 13
Adjusting the tension spring
for the net brake 4 13
Adjusting the tension spring
for the net roll tensioning clamp 4 13
Adjusting the tension spring for the pick-up 4 15
Adjusting spring-loaded cylinders of pick-up 4 15
Adjusting the spring-loaded cylinder
that pre-loads the knife of the net
wrapping mechanism 4 15
Timing of twine knives 4 17
Hydraulic system 4 17
Hydraulic oil filter (balers with filter system) 4 17
Replacing paper filter element 4 17
Automatic chain lubrication 4 19
Type of lubricant 4 19
Winter storage instructions 4 21

IMAGES PREVIEW OF THE MANUAL:

Need help? Contact: [email protected]

PLEASE NOTE:

• This is the same manual used by the dealers to diagnose and troubleshoot your vehicle
• You will be directed to the download page as soon as the purchase is completed. The whole payment and downloading process will take anywhere between 2-5 minutes
• Need any other service / repair / parts manual, please feel free to contact [email protected] . We still have 50,000 manuals unlisted

S.V