CLAAS Baler VARIANT 260 – 260 RC 280 – 280 RC 350 370 360 – 365 – 365 RC 380 – 385 – 385 RC Roller No. 5 greasable Fitting Instructions Manual_DE_EN_FR_IT_ES_RU

Description

CLAAS Baler VARIANT 260 – 260 RC 280 – 280 RC 350 370 360 – 365 – 365 RC 380 – 385 – 385 RC Roller No. 5 greasable Fitting Instructions Manual_DE_EN_FR_IT_ES_RU

IMAGES PREVIEW OF THE MANUAL:

DESCRIPTION:

CLAAS Baler VARIANT 260 – 260 RC 280 – 280 RC 350 370 360 – 365 – 365 RC 380 – 385 – 385 RC Roller No. 5 greasable Fitting Instructions Manual_DE_EN_FR_IT_ES_RU

1.1 General points
This manual describes the procedure to follow to modify
the following balers:
– VARIANT 260 / 260 RC
– VARIANT 280 / 280 RC
– VARIANT 350
– VARIANT 370
– VARIANT 360 / 365 / 365 RC
– VARIANT 380 / 385 / 385 RC
It is essential to follow the safety advice given in the
baler manual.

2.1 Important
2.1.1 General points

To prevent accidents, these instructions must be read
by everyone who uses the machine and who deals
with maintenance, servicing or inspection.
Pay particular attention to the “Safety advice” section
in this manual, and observe the accident prevention
regulations applicable in the country of use.
Before starting work, ensure that all tools and equipment
are to hand.
Compare the existing machine/accessories types with
the list in the “Parts kit” section and the delivered
spare parts kit.
The specification of the parts, eg. for bolts, can be
found in the list headed “Parts kit”. In this list, every
part to be fitted has a position number (pos.-no.).
In the fitting instructions, existing parts are marked with
letters and new parts with numbers (position numbers)
for easier orientation.
Texts and pictures have been kept neutral whenever
possible. Text references indicate the differences
between the individual machine types.
Technical specifications, dimensions and weights are
given as an indication only. Following CLAAS’s policy
to improve its products as technical developments continue,
CLAAS reserves the right to make alterations.
Responsibility for errors or omissions not accepted.
Front, rear, right-hand and left-hand always refer to the
machine as seen in the direction of forward travel

TABLE OF CONTENTS:

CLAAS Baler VARIANT 260 – 260 RC 280 – 280 RC 350 370 360 – 365 – 365 RC 380 – 385 – 385 RC Roller No. 5 greasable Fitting Instructions Manual_DE_EN_FR_IT_ES_RU

FR 3
DE 4
EN 5
IT 6
ES 7
RU 8
1 FR 9
1 Introduction 9
11 Généralités 9
12 Machines à équiper 9
2 Consignes de sécurité 10
21 Important 10
211 Généralités 10
212 Utilisation conforme à la destination 10
22 Consignes de sécurité 11
221 Caractérisation des indications sur les dangers 11
222 Consignes générales de sécurité et de prévention des accidents 12
223 Stationnement de la machine 12
3 Lot de pièces 13
31 Kit rouleau N 5 – 4 courroies – 00 0857 297 0 13
32 Kit rouleau N 5 – 5 courroies – 00 0857 298 0 14
4 Notice de montage 15
41 Introduction 15
411 Généralités 15
42 Dépose du rouleau N 5 16
421 Sécurisation de la presse 16
422 Préparation de la presse 17
423 Dépose du rouleau N 5 18
43 Remontage de la machine 22
431 Remontage rouleau N 5 22
432 Remontage de l’entraînement 24
433 Tests de fonctionnement 28
5 Plan de graissage 29
51 Graissage de la presse 29
52 Points de graissage 29
521 Graisses et huiles de lubrification 29
522 Intervalles de graissage 30
53 Graissage manuel de la presse 31
531 Côté gauche – toutes les 10 h 31
532 Côté droit – toutes les 10 h 32
1 DE 33
1 Einleitung 33
11 Allgemeines 33
12 Auszurüstende Maschinen 33
2 Sicherheitsvorschriften 34
21 Wichtig 34
211 Allgemeines 34
212 Benutzung gemäß Zweckbestimmung 34
22 Sicherheitsvorschriften 35
221 Kennzeichnung der Gefahrenhinweise 35
222 Allgemeine Vorschriften zur Sicherheit und Unfallverhütung 36
223 Parken der Maschine 36
3 Stückliste 37
31 Set für Walze Nr 5 – 4 Bänder – 00 0857 297 0 37
32 Set für Walze Nr 5 – 5 Bänder – 00 0857 298 0 38
4 Anbauanleitung 39
41 Einleitung 39
411 Allgemeines 39
42 Ausbau der Walze Nr 5 40
421 Sichern der Presse 40
422 Vorbereiten der Presse 41
423 Ausbau der Walze Nr 5 42
43 Montage der Maschine 46
431 Walze Nr 5 wieder einbauen 46
432 Zusammenbau des Antriebs 48
433 Funktionstest 52
5 Schmierplan 53
51 Schmierung der Presse 53
52 Schmierpunkte 53
521 Schmierfette und Schmieröle 53
522 Schmierintervalle 54
53 Manuelle Schmierung der Presse 55
531 Linke Seite – alle 10 h 55
532 Rechte Seite – alle 10 h 56
1 EN 57
1 Introduction 57
11 General points 57
12 Machines that can be fitted 57
2 Safety advice 58
21 Important 58
211 General points 58
212 Use in accordance with original specifications 58
22 Safety instructions 59
221 Definition of hazard information 59
222 General safety and accident prevention advice 60
223 Parking the machine 60
3 Parts kit 61
31 Roller kit no 5 – 4 belts – 00 0857 297 0 61
32 Roller kit no 5 – 5 belts – 00 0857 298 0 62
4 Assembly instructions 63
41 Introduction 63
411 General points 63
42 Removing roller no 5 64
421 Securing the baler 64
422 Preparing the baler 65
423 Removing roller no 5 66
43 Reassembling the machine 70
431 Refitting roller no 5 70
432 Refitting the drive 72
433 Operating tests 76
5 Lubrication plan 77
51 Greasing the baler 77
52 Lubrication points 77
521 Lubricating oils and grease 77
522 Lubrication intervals 78
53 Manual lubrication of the baler 79
531 Left-hand side – every 10 hours 79
532 Right-hand side – every 10 hours 80
1 IT 81
1 Introduzione 81
11 Generalità 81
12 Macchine da equipaggiare 81
2 Istruzioni di sicurezza 82
21 Importante 82
211 Generalità 82
212 Utilizzo conforme alla destinazione 82
22 Istruzioni di sicurezza 83
221 Caratterizzazione delle indicazioni relative ai pericoli 83
222 Istruzioni generali di sicurezza e di prevenzione degli incidenti 84
223 Stazionamento della macchina 84
3 Lotto di pezzi 85
31 Kit rullo N 5 – 4 cinghie – 00 0857 297 0 85
32 Kit rullo N 5 – 5 cinghie – 00 0857 298 0 86
4 Istruzioni di montaggio 87
41 Introduzione 87
411 Generalità 87
42 Smontaggio del rullo N 5 88
421 Messa in sicurezza della pressa 88
422 Preparazione della pressa 89
423 Smontaggio del rullo N 5 90
43 Rimontaggio della macchina 94
431 Rimontaggio rullo N 5 94
432 Rimontaggio della trasmissione 96
433 Test di funzionamento100
5 Piano di lubrificazione101
51 Lubrificazione della pressa101
52 Punti di lubrificazione101
521 Grassi e oli lubrificanti101
522 Intervalli di lubrificazione102
53 Lubrificazione manuale della pressa103
531 Lato sinistro – ogni 10 h103
532 Lato destro – ogni 10 h104
1 ES105
1 Introducción105
11 Información general 105
12 Máquinas aplicables 105
2 Normas de seguridad106
21 Importante106
211 Información general106
212 Utilización conforme a la aplicación106
22 Normas de seguridad107
221 Símbolos aplicables a las indicaciones de peligro107
222 Normas generales de seguridad y de prevención de accidentes108
223 Fijación de la máquina108
3 Lote de piezas109
31 Kit rodillo n 5 – 4 correas – 00 0857 297 0109
32 Kit rodillo n 5 – 5 correas – 00 0857 298 0110
4 Manual de montaje111
41 Introducción111
411 Información general111
42 Desmontaje del rodillo n 5112
421 Fijación de la prensa112
422 Preparación de la empacadora113
423 Desmontar el rodillo n 5114
43 Volver a montar la máquina118
431 Volver a montar el rodillo n 5118
432 Montaje del accionamiento120
433 Prueba de funcionamiento124
5 Plan de engrase125
51 Engrase de la empacadora125
52 Puntos de engrase125
521 Grasas y aceites lubricantes125
522 Intervalos de engrase126
53 Engrase manual de la empacadora127
531 Lado izquierdo, cada 10 h127
532 Lado derecho, cada 10 h128
1 RU129
1 Ââåäåíèå129
11 Îáùèå ñâåäåíèØ 129
12 Îáî²óäóåìûå ìàøèíû 129
2 ÓêàçàíèØ ïî ìå²àì áåçîïàñíîñòè130
21 Âàæíî130
211 Îáùèå ñâåäåíèØ130
212 Èñïîëüçîâàíèå ïî íàçíà÷åíè 130
22 ÓêàçàíèØ ïî ìå²àì áåçîïàñíîñòè131
221 Âûäåëåíèå óêàçàíèé íà îïàñíîñòè131
222 Îáùèå óêàçàíèØ ïî ìå²àì áåçîïàñíîñòè è ï²åäóï²åæäåíè íåñ÷àñòíûõ ñëó÷àåâ132
223 ÑòîØíêà ìàøèíû132
3 Êîìïëåêò äåòàëåé133
31 Êîìïëåêò âàëêà ¶ 5 – 4 ²åìíØ – 00 0857 297 0133
32 Êîìïëåêò âàëêà ¶ 5 – 5 ²åìíåé – 00 0857 298 0134
4 Ãóêîâîäñòâî ïî óñòàíîâêå135
41 ÂÂÅÄÅÍÈÅ135
411 Îáùèå ñâåäåíèØ135
42 ÑíØòèå âàëêà ¶ 5136
421 ϲèâåäåíèå ï²åññ-ïîäáî²ùèêà â áåçîïàñíîå ñîñòîØíèå136
422 Ïîäãîòîâêà ï²åññ-ïîäáî²ùèêà137
423 ÑíØòèå âàëêà ¶ 5138
43 Óñòàíîâêà íà ìàøèíó142
431 Óñòàíîâêà âàëêà ¶ 5142
432 Óñòàíîâêà ï²èâîäà144
433 ϲîâå²êè ²àáîòû148
5 Ñõåìà ñìàçêè149
51 Ñìàçêà ï²åññ-ïîäáî²ùèêà149
52 Òî÷êè ñìàçêè149
521 Êîíñèñòåíòíûå ñìàçêè è ìàñëà149
522 Ïå²èîäè÷íîñòü ñìàçêè150
53 Ãó÷íàØ ñìàçêà ï²åññ-ïîäáî²ùèêà151
531 ËåâàØ ñòî²îíà – êàæäûå 10 ÷àñîâ151
532 ϲàâàØ ñòî²îíà – êàæäûå 10 ÷àñîâ152

PLEASE NOTE

• This is the SAME MANUAL used by the dealerships to diagnose your vehicle
• No waiting for couriers / posts as this is a PDF manual and you can download it within 2 minutes time once you make the payment.
• Your payment is all safe and the delivery of the manual is INSTANT – You will be taken to the DOWNLOAD PAGE.
• So have no hesitations whatsoever and write to us about any queries you may have : heydownloadss @gmail.com

S.M