CLAAS CARGOS 9600 CARGOS 9500 CARGOS 9400 Loading and cutting unit Conversion instructions Manual _DE_EN_FR_IT_RU

Description

CLAAS CARGOS 9600 CARGOS 9500 CARGOS 9400 Loading and cutting unit Conversion instructions Manual _DE_EN_FR_IT_RU

DESCRIPTION:

CLAAS CARGOS 9600 CARGOS 9500 CARGOS 9400 Loading and cutting unit Conversion instructions Manual _DE_EN_FR_IT_RU

General instructions
Safety precautions

• Work may be carried out only by specialist workshops authorised by CLAAS and having qualified personnel. The general safety, accident prevention and environmental protection regulation must be observed. Read and observe the Safety chapter in the Operator’s manual. Carry out work under the raised machine/front attachment or raised components only when a
• safe support is provided. Before carrying out work on the hydraulic system, lower machine/front attachment and hydraulically actuated components to the ground. Depressurise the system. All work must be carried out with the drive disengaged and the engine stopped! – Remove the ignition key! Relieve the tension of pre-loaded energy accumulators
• (springs, accumulators, hydraulic cylinders) and of components which are pre-loaded by energy accumulators properly prior to starting installation work! Check the tight seat of all bolts after assembly. Carry out a function test.

TABLE OF CONTENTS:

CLAAS CARGOS 9600 CARGOS 9500 CARGOS 9400 Loading and cutting unit Conversion instructions Manual _DE_EN_FR_IT_RU

Language : DE_EN_FR_IT_RU
Pages : 40
Downloadable : Yes
File Type : PDF
Size: 18.1 MB

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.M