CLAAS CL 16 Planetary-steering axle Service and Repair Manual – PDF DOWNLOAD

Description

CLAAS CL 16 Planetary-steering axle Service and Repair Manual – PDF DOWNLOAD

DESCRIPTION:

CLAAS CL 16 Planetary-steering axle Service and Repair Manual – PDF DOWNLOAD

1 General and Service Work

1.1 Introduction

The series production of CL 16 began in July 2002. The differential has a hydraulic actuated multi disc differential lock (MDDL). Both outer planetary drives are driven by double joint cardan shafts. The axle is steerable and is constructed for rocking suspension. The main drive is achieved via cardanflange size Æ150. Two hydraulically operated multi-disk brakes used as operating brake and as parking brake are sufficient for the installation.
TABLE OF CONTENTS:

CLAAS CL 16 Planetary-steering axle Service and Repair Manual – PDF DOWNLOAD

TABLE OF CONTENTS
1 GENERAL AND SERVICE WORK 2
1.1 Introduction 2
1.2 Ordering Spare Parts 2
1.3 Parts Liability and Guarantees for safety related components 3
1.4 Working Conditions and Tools 3
1.5 Service Work 4
1.5.1 Lubrication Table 4
1.5.2 Service Interval 5
2 REPAIR MANUAL 10
2.1 Exchange of the Complete Differential 10
2.2 Repairs on the Differential 11
2.2.1 Exchange of Crown Gear / Pinion 11
2.2.2 Exchange of Differential Cage (Compensating Gearbox) 22
2.2.3 Differential Lock 23
2.3 Planetary Drive 24
2.3.1 Complete Exchange of Planetary Cage 26
2.3.2 Exchange of Sun gear shaft 26
2.3.3 Checking and Adjusting Thrust Stud Adjustment. 27
2.3.4 Exchange of Planetary Studs and Gears 28
2.3.5 Exchange of Crown Gear Carrier 28
2.4 Wheel Bearings 29
2.4.1 Gear Bearing Exchange 29
2.4.2 Gear Bearing Adjustment 31
2.5 Brake 32
2.5.1 Check Disks‘ Wear 32
2.5.2 Exchange of the Piston seals for the Operating brake 33
2.5.3 Exchange of brake disks and pressure springs for the Operating brake 35
2.6 Exchange of Double Jointed Cardan Shaft 37
2.6.1 Exchange of Seal ring 38
2.7 Steering Knuckle Bearing 39
2.7.1 Remove steering knuckle stud 39
2.7.2 Exchange of Bearing Bush 39
2.7.3 Install steering knuckle stud 40
2.7.4 Recalculate bearing washer 41
2.8 Exchange of Steering Cylinder 42
2.9 Adjust Track 43
IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.
  S.m