Claas Commandor 228CS operator’s Manual – PDF DOWNLOAD

Description

Claas Commandor 228CS operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

Claas Commandor 228CS operator’s Manual – PDF DOWNLOAD

Introduction 

• This manual is intended to give the machine operator information on setting, using and servicing the COMMANOOR 228 CS. Text and pictures apply. in general, to all four combine models and the information given applies equally, except where reference is made to a particular model in captions to the pictures or in the main text.
• Operation and maintenance of important ancillary equipment is also covered by this manual. Please read the instructions which apply to the appropriate ancillary equipment on your combine. Provided you follow the advice on the care and servicing of your machine you will be rewarded with reliable and long service from your Combine Harvester.
• We recommend that you allow your authorized CL.AAS Dealer to carry out the regular maintenance. Omissions of parts of the maintenance schedule or incorrect operation lead to a drop in performance and cost valuable time.
• By correct servicing and operation you can make full use of our sound experience and of the latest technical knowledge in Combine Harvesting with which your combine has been designed and the insure reliabity of your Combine Harvester. This Operator’s Book can be ordered from your CL.AAS Dealer as well as the manuals listed below:

TABLE OF CONTENTS:

Claas Commandor 228CS operator’s Manual – PDF DOWNLOAD

Contents Important 5
Identification plate, combine serial number,
engine number 10
cutterbar serial number,
600 m – 900 m cutterbars/rice cutterbar
soybean cutterbar, 11
maize picker head, serial number of maize picker head,
6-row folding maize picker head,
serial number of maize picker head stalk chopper 12
cab serial number cutterbar trailer 13
Safety rules 14
1 General information
Specifications COMMANDOR 228 CS 1 1
Safety features 1 8
Sectional view of combine 1 9
Description and function of the combine 1 10
Considerations before combining 1 11
2 Prior to operation
Before using the machine make these
checks and follow the instructions 2 1
。perator’s platform 2 3
Cab 2 4
Cab with ventilating system 2 5
Cab with ventilating system and healing 2 5
Cab with ventilating system and conditioner 2 5
Putting the air conditioner into operation 2 6
Steering column 2 7
Vehicle information unit 2 8
Function off vveehhii cle information unit 2 9
Operations display screen 2 10
Function of operation display 2 11
Switch console and multi-function 旺r 2 12
Multi-fuction lever 213
Central terminal compartment 2 13
Plug-in type module (P) CLAAS Autopilot 214
Grain tank discharge tube – swinging out and in 2 14
Grain tank discharge engagement
and disengagement 215
Threshing mechanism and cutterbar drive –
engagement and disengagement 2 15
Adjusting the threshing drum speed 216
Positioning1hecutterbar/mazepICKerhead
for road travel 2 16
Adjusting the steering column position 2 16
Driver’s seat adjustment 2 17
知ess ladder 217
Front ladder 2 17
Horizontal ladder ex1ension 2 18
Rear ladder 218
Driving the combine 2 19
Automatic engine cut-off 2 19
Starting the engine 220
Reduced speed-no load (R) 221
Gear ranges, machines with
hydrostatic ground drive 221
Stopping the combine, hydrostatic
ground drive machines 2 21
Driving behavior 2 22
Steering 222
Brakes 222
Stopping the engine 223
Machines with automatic engine cutt-off 223
Rear axle 223
Cutterbar hydraulic cylinders 224
Attaching the cutterbar hydraulic cylinders 2 24
Attaching the R/H cutterbar cylinder 224
Attaching a third hydraulic cylinder 225
Towing the combine 225
Forward 225
Backward 225
Safety Lock 226
Fire Extinguisher 226
Tilting the railing of the walkw羽，．． 226
Wheel chock 2 26
Grain tank 227
3 Basic adjustment and operation
Cutterbar 3 1
Dividers 3 1
Outer deflector 3 1
Inner deflector 3 1
Grain lifters 3 2
Knife 3 2
Removing the knife 3 2
Installing the knife 3 3
Adjusting the height of the kn甘e 3 3
Adjusting the knife clips 3 3
Spare knife 3 4
Knife drive 3 4
Cutterbar skids 3 4
Reel 3 5
Reel tines 3 5
Reel drive 3 5
Fore and aft reel adjustment 3 6
Reel variable speed drive 3 7
Main table auger 3 8
Adjusting position of auger fingers 3 8
Feeder housing 3 9
Cutterbar reverse drive 3 10
Attaching the cutterbar 3 10
Machines with CLAAS Auto Contour 3 10
Setting the correct position of the
hydraulic cylinders 3 11
Attaching the universal drive shaft 3 12
Connecting hydraulic hoses 3 12
Connecting the cables 312
Attaching the cutterbar 3 13
Machine without Auto Contour 3 13
Attaching the universal drive shaft 3 13
Connecting hydraulic hoses 3 14
Connecting the cables 3 14
Levelling the cutterbar 314
Installing the stands 3 15
CLAAS Auto Contour
Automatic cutting height control and
lateral levelling system 3 16
Cutterbar automatic pre-set height 3 18
Setting the float springs of the cutterbar 3 19
Checking cutterbar float springs and checking
feeder house suspension for smooth movement 3 19
Setting the cutting height indicator 3 20
Adjusting stop (Q) 3 20
Cutterbar spring pressure indicator 3 20
Adjusting drop rate of the cutterbar 320
Putting the CLAAS Auto Contour System into
operation 321
Operation with maize picker head 3 22
Programming the CLAAS Auto Contour System 3 22
Putting the pre-set height 苹tern of the
cutterbar into operation 323
CLAAS Contour System (ground pressure controQ 324
Setting the cutterbar ground pressure 325
Putting the CLAAS Contour System into operation 3 25
CLAAS cutterbar pre-set height 3 27
Putting the cutterbar pre-set height 匈stem 327
into operation 227
Cutterbar adjusting range 3 28
Cutting height adjustment range 3 28
Clearance height 328
Cutterbar clutch 3 29
Engaging and d函ngaging the cutterbar 3 29
Threshing mechanism and forced separation 3 30
Stone trap 330
Engaging and disengaging the threshing
mechanism 330
Threshing concave adjustment 331
Basic setting with various types of
threshing concaves 3 32
Basic rules for concave-to-drum
clearance settings 334
Threshing drum 334
Cleaning the threshing parts 3 35
Threshing drum speed 3 35
Adjusting the threshing drum speed 3 36
Threshing drum speed display 3 36
Threshing drum two-step 面able speed drive 3 36
Slow speed threshing drum kit 337
Oisawning 3 37
Unslugging the threshing drum 3 38
Separation 勾linders 339
Drive to separation cylinders 3 40
Speed diagramm 3 40
Separation concaves 3 41
Arrangement off separation concaves 3 43
Guide plate 344
warning signal 344
Cleaning 3 45
S函e pan 345
Preparation floor 3 45
Cleaning fan 346
Electrical fan speed adjustment 3 46
Fan speed displ羽 346
沁ditional wind-controlled cleaning step 347
Adjusting the deflector in the primary air duct 347
Adjusting the windboard 347
Adjusting the frogmouth sieves 3 48
Hillside riser plates 3 48
Lowersi邸．．．．．．．．．．．．．．．．．．．．．．．．．．．． 3 48
Removing upper sieve 3 49
Installation of upper si蜘．．．．． ． 349
Removing lower s心心 349
Installing lower si函．．．．．．．．．．．．．．．．．．． 349
3-0 cleaning system 350
Returns 350
Combine performance monitor 351
Adjusting monitor to crop type 3 53
心justing sensitivity of the sensors 3 53
Grain delivery 354
Auger and auger troughs 3 54
Elevators 3 54
心justing tension of elevator chains 355
Grain tank 356
Filling the grain tank 3 56
Unloading the tank 357
Discharge tube 357
Swinging the discharge tube out and in 3 58
Grain tank discharge – engage and disengage 3 58
Clean-out door on grain tank discharge tube 359
Drive to grain tank discharge augers 3 59
Shear bolt – grain tank discharge 3 59
Lateral auger drive 359
Grain tank fill indicator 3 60
Straw chopper 3 60
Before using the straw chopper for the
first time, check 361
Putting the straw chopper into operation 361
Adjusting spreading width 362
巳ectric deflector adjustment 3 63
Adjusting the deflectors 3 63
Adjusting the length of cut 3 63
Adjusting cross knife 3 64
Changing the straw chopper to out-of-work
foorr wwii ndrowing straw 364
Hitching the cutterbar trailer to the combine 3 65
Sieve chart 3 67
Suggested combine adjustments 3 68
Special notes on threshing various crops 3 74
Special threshing equipment and ancillary equipment 3 75
Maize concave 375
Corn cob mix equipment (CCM) 3 75
S函es 375
Special rasp bars 375
Fan shutters for combining grass seed and
other special crops 3 76
Protective guards for fan, augers and elevators 3 76
Maize picker head 376
CLAAS Autopilot 3 76
Soybean head/cutterbar 3 77
Transport trailers 377
Rice threshing equipment 3 77
Special crop divider 3 77
Sunflower cutterbar 378
CLAAS straw spreader 378
CLAAS chaff spreader 3 78
CLAAS Fieldwo水Computer 3 79
Wo水lights • 379
4 Maintenance
Important maintenance instructions 4 1
Maintenance schedule 4 3
Lubricants chart 4 6
Hydraulic 羽stem 4 8
Lift hydraulic system 4 8
Adjusting the pump drive belt 4 8
Checking the oil level 4 8
Changing hydraulic oil 4 8
Cleaning the screen filter 4 9
Replacing the paper filter _ 4 9
Bleeding the hydraulic steering system 410
Bleeding the reel 创inder 4 10
Bleeding the hydraulic cylinders for cutterbar
lateral I纽lling 411
SAUER hydrostatic ground drive system 4 12
Hydraulic oil change 412
Checking the I细I of the oil 4 13
Hydrostatic pump adjustment 413
Foot brakes/brake fluid 4 13
Gear shift control adjustment 414
Transmission and gearboxes 414
Change-speed transm函on 414
Final drives 4 14
Planetary gears of rear wheel d佃system 4 15
CLAAS 4-Trac System 415
Knife drive casing 415
Threshing drum two-step variable speed d响． 416
Grain tank 4 16
Changing variable speed belts 4 17
Removal and installation of drum variable speed belt 4 17
Removal and installation of fan variable speed belt 418
Threshing mechanism d响adjustment 419
Cutterbar d恼adjustment 4 20
Adjusting belt-operated clutch of grain tank discharge 4 21
Hydrostatic ground d恼adjustment 4 22
Adjusting the step pu眙yd佃for separation Ofllnders 4 23
Adjusting the drives for the separation cylinders 424
Compressor type air conditioning 4 25
Tensioning the compressor dr碌belt 425
Cleaning the evaporator 425
Cleaning the condenser 426
Replacing the filter receiver drier by a new one 4 26
芦fer它n 芯罕；t怎言ut了：：：nt瓟 427
Putting the compressor垒type air conditioner
system into operation 427
Maintenance work before the harvest 4 27
Cab 428
Cleaning the filter 4 28
Cleaning the units located in the cab roof 4 28
Tilting the cab 429
Basic speed of machine 4 30
Checking basic speed of machine 430
Functions monitor 430
Setting the magnetic pick-ups 430
Fire extinguisher 431
Straw chopper 431
Changing the free-swinging knives 431
Changing the stationary kn殴．．．．．．．．．．． ． 432
Turning the rotor with the special tool 432
Adjusting the spring-loaded 创inder or the
tensioning device 432
Adjusting the spring-loaded 勾linder on
intermediate
Problem, cause or remedy 4 34
Cutterbar 4 34
Threshing equipment 435
Cylinder system separation 4 36
Cleaning 437
3-D cleaning unit 437
Returns 4 37
Elevators 438
Grain tank 438
Grain losses 438
Compressor-type air conditioner 440
Winter storage instructions for combines 4 41
5 Engines
Mercedes OM 443 5 1
Fuel feed system 5 1
Fuel tank 5 2
Water trap/fuel pre-filter 5 2
Fuel sediment bowl 5 3
Fuel filter 5 3
Bleeding the fuel system 5 4
Checking engine oil level 5 4
Engine oil change 5 4
Oil filter 5 5
Filling the engine oil 5 6
Tensioning V-belts 5 6
Tensioning the alternator belt 5 6
Cooling system 5 7
Coolant 5 7
Filling the cooling 羽stem 5 7
Overpressure 5 8
Protection against corrosion 5 9
Warning notice 5 9
Cooling water temperature 5 9
Rotary rad吼or screen 5 10
Vacuum fan 5 10
Folding up the rotary radiator screen 5 10
Swinging up the oil cooler 5 11
Cleaning the oil cooler 5 11
Cleaning the water cooler 5 11
Dry-type air cleaner 511
Warning device 5 11
Cleaning the air cleaner intake screen 5 12
Cleaning the air cleaner 5 12
Cleaning the dry-type air cleaner with dust
extractor unit 5 12
Dry-type air cleaner with safety filter cartridge 5 13
Batteries 5 14
Batteries and cable connections 515
Colour code 515
Alternator 515
Engine problems, cause or remedy 5 16
Battery 5 17
Engine winter storage 5 18

IMAGES PREVIEW OF THE MANUAL:

CLAAS COMMANDOR 228CS OPERATOR’S MANUAL – PDF DOWNLOAD:

PLEASE NOTE:

• This is the SAME exact manual used by your dealers to fix your vehicle.
• The same can be yours in the next 2-3 mins as you will be directed to the download page immediately after paying for the manual.
• Any queries / doubts regarding your purchase, please feel free to contact [email protected]

S.M