CLAAS CORTO 3100 S CORTO 3100 N OPERATOR´S MANUAL – PDF DOWNLOAD

Description

CLAAS CORTO 3100 S CORTO 3100 N OPERATOR´S MANUAL – PDF DOWNLOAD

DESCRIPTION:

CLAAS CORTO 3100 S CORTO 3100 N OPERATOR´S MANUAL – PDF DOWNLOAD

INTRODUCTION :

This manual provides information on the use, setting and servicing of the CLAAS Drum Mower. The advice on the care and servicing should be followed in order to obtain maximum performance and long service. The assembly and the regular inspection of your machine should be performed by your specialist workshop. Neglect in maintenance and service and incorrect use will result in poor machine efficiency and loss of valuable time. By correct operation and servicing you can make full use of the technical knowledge and experience with which your machine has been designed.
Important:

The instructions contained in this manual should be read carefully and observed by all persons concerned with the operation, maintenance and inspection of this machine in order to prevent accidents. Especially the »Safety Rules« and the »Pior to Operation« sections should be read with the utmost care and adhered to.

• The use of spare parts, accessories and ancillary equipment which are not originally manufactured or not checked and approved by CLAAS, can change the specified design characteristics of the CLAAS machine or can detract from its functional performance with a possible adverse effect on the active and/or passive safety of the machine and its occupational safety standards (accident prevention).
• CLAAS are in no way liable for any damage or personal injury caused through the use of other than original or approved CLAAS parts, accessories and ancillary equipment.
• Technical data, dimensions and weights are given as an indication only. CLAAS reserve the right to make changes subsequently as technical developments continue. Responsability for errors and omissions not accepted. Front, rear, right and left refer to the direction of travel.

TABLE OF CONTENTS:

CLAAS CORTO 3100 S CORTO 3100 N OPERATOR´S MANUAL – PDF DOWNLOAD

Identification Plate 10
Safety Advice 15
Safety Decals with Warning Symbols 28
1 Technical Data
Technical Data 1 4
Sound Level 1 5
2 Before Operation
Assembly Instruction 2 2
Installation of Cutting Blades 2 4
Conditioner 2 6
Installing the conditioner 2 6
Removing the conditioner 2 8
Installation of the cover cloth 2 8
Before Using the Machine 2 12
Attachment to the Tractor 2 14
Hitch Pins 2 14
Checking the PTO Shaft for Correct Length 2 14
Hydraulic Connection 2 18
Electric Connection 2 18
Prop Stand 2 20
Detaching the Machine 2 20
Prior to Transport 2 20
Transport on Public Roads 2 22
3 Operation
Operation 3 2
Working Position 3 2
Conditioner 3 2
Cutting Height Adjustment 3 6
Cutting Height Adjustment
on Uneven Ground 3 6
Mowing 3 8
Varying the Swath Width 3 10
Fitting Feeder Bars 3 10
Optionel Equipment 3 10
Sliding disc for high cut 3 10
Spacer cone for high cut 3 12
Re-inforced Blades 3 12
Cranked blades 3 12
Feed jackets for the central drums 3 12
Optional kit „Deflectors and feed plates“ 3 14
Optional kit „Additional baffle plate“ 3 14
4 Maintenance
Important Maintenance Instructions 4 3
Mainenance 4 8
Flotation of the Machine 4 8
Drive Mechanism 4 10
Tensioning the Drive Belts 4 10
Belt Tension – Main Drive 4 10
Belt Tension – Conditioner Drive 4 10
Lubrication 4 12
Main Gear 4 12
Angle Drive 4 12
Frame Trough 4 14
Cutting Blades 4 14
Replacement of Cutting Blades 4 14
Knife holders 4 16
Cutting Height Adjustment 4 18
PTO Drive Shaft 4 18
Maintenance of the Disc Clutch 4 20
Winter Storage Instructions 4 20
5 Lubrication Chart

CLAAS CORTO 3100 S CORTO 3100 N OPERATOR´S MANUAL – PDF DOWNLOAD:

IMAGES PREVIEW OF THE MANUAL:

PLEASE NOTE:

• This is the SAME manual used by the dealers to troubleshoot any faults in your vehicle. This can be yours in 2 minutes after the payment is made.
• Contact us at [email protected] should you have any queries before your purchase or that you need any other service / repair / parts operators manual.

S.V