Claas CORTO 3150 F Profil CORTO 275 F Profil Assembly and Operator’s Manual – PDF DOWNLOAD

Description

Claas CORTO 3150 F Profil CORTO 275 F Profil Assembly and Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

Claas CORTO 3150 F Profil CORTO 275 F Profil Assembly and Operator’s Manual – PDF DOWNLOAD

INTRODUCTION

• This operator’s manual is the original operator’s manual. Hereafter, it is referred to simply as the operator’s manual. This operator’s manual provides information on the use, adjustment, and operation of your CLAAS drum mower. The advice on care and servicing should be followed in order to obtain maximum performance and long service from the machine.
• Assembly and regular inspections of your machine should be carried out by your specialist workshop. Neglect in maintenance or service, and incorrect use will result in poor machine efficiency and loss of time. With correct operation and maintenance, you will benefit from the technical know-how and experience that went into the design of the machine, and your mower will always work reliably.

TABLE OF CONTENTS:

Claas CORTO 3150 F Profil CORTO 275 F Profil Assembly and Operator’s Manual – PDF DOWNLOAD

1 Machine description
2 Introduction
Introduction 21
Validity 21
3 Table of contents
4 Preface
Of special importance 41
Identification plate 42
5 Safety Rules
Intended use 51
Avoidable incorrect applications 51
De-commissioning and disposal 52
Identification of warning and danger signs 53
General safety regulations and safety precautions 53
Attached machines 54
Trailed machines 55
PTO operation 55
Hydraulic system 55
Tyres 55
Maintenance 56
Noise pressure level 56
Safety decals with pictorials 57
6 Technical data
CORTO 3150 F Profil 61
CORTO 275 F Profil 61
Axial loading, minimum ballast
and total weight calculation 62
Noise level 65
CORTO 3150 F Profil 65
CORTO 275 F Profil 65
7 Assembly
Unloading/loading the machine 71
Assembling the machine 71
CORTO 3150 F 71
CORTO 275 F 74
Adjusting the universal shaft support 74
Mounting the mower blades 75
CORTO 3150F/275F 75
First machine hitch-up 76
8 Before operation
Check every time before operation 81
Hitch up the mower 82
Three-point hitching with quick coupler 82
Longitudinal compensation of mower 84
Adjusting the top link 84
Universal drive shaft 85
Mounting universal drive shaft 85
Fitting to DISCO 8550 / 8550 C 87
Fitting on CLAAS Celtis 88
Permissible drive shaft angles 88
Adapting the length 88
Weight relief 89
Fitting examples 811
Parking the machine 816
Before transport 818
Road travel 819
Lighting bracket 820
9 Operation
Field operation 91
Working position 91
Transport position 92
Adjusting the working height 93
Adjusting the cutting height for uneven terrain 94
Weight relief 94
Adjusting the swath width 94
Putting the mower into operation 95
Notes on mowing 97
Environmental recommendations 98
Difficult working conditions 99
Accessory equipment 910
Skid plate extension for high cut 910
Slip yoke kit 910
Additional swath discs 911
Three-point booster 912
Mounting with lateral offset 912
Longitudinal swinging mechanism 913
10 Maintenance
Important maintenance instructions 101
Screws and bolts 101
Hydraulic system 101
Lubrication 101
Protective devices (guard frames) 102
Drives 103
Gear lubrication 103
Gear casing 103
Main gearbox 104
V-belts 105
Checking the V-belts 105
Tensioning the V-belts 106
Replacing the V-belts 106
Adjusting the cutting height 107
Mower blades 109
Replacing the mower blades 109
Mower blade holders 1010
Spring adjustments 1012
Longitudinal mower compensation 1012
Adjusting the longitudinal compensation springs 1012
Transverse compensation of mowing unit 1013
Readjusting the transverse compensation 1013
Swath adjustment 1014
Universal drive shaft 1015
General notes on universal drive shafts 1015
Table of contents
00 0293 507 4 – ZBA+BA CORTO 3150 F Profil / 275 F Profil 32
Table of contents
Protective devices 1016
Threaded fasteners 1016
Fasteners 1016
Cleaning and care 1016
Winter storage 1017
11 Lubricating chart
Safety Rules 111
Lubricants 111
Lubrication 111
IMAGES PREVIEW OF THE MANUAL:

CLAAS CORTO 3150 F PROFIL CORTO 275 F PROFIL ASSEMBLY AND OPERATOR’S MANUAL – PDF DOWNLOAD:

PLEASE NOTE:

• This is the same manual used by the DEALERSHIPS to SERVICE your vehicle.
• The manual can be all yours – Once payment is complete, you will be taken to the download page from where you can download the manual. All in 2-5 minutes time!!
• Need any other service / repair / parts manual, please feel free to contact us at heydownloadss @gmail.com . We may surprise you with a nice offer

s.m