CLAAS CORTO 3150 F & 275 F Profil Operator Manual PDF Download

Description

CLAAS CORTO 3150 F Profil CORTO 275 F Profil Operator’s Manual – PDF DOWNLOAD

DESCRIPTION:

CLAAS CORTO 3150 F Profil CORTO 275 F Profil Operator’s Manual – PDF DOWNLOAD

INTRODUCTION

This manual provides information on the use, adjustment, and operation of your CLAAS drum mower. The advice on care and servicing should be followed in order to obtain maximum performance and long service from the machine. Assembly and regular inspections of your machine should be carried out by your specialist workshop. Neglect in maintenance or service, and incorrect use will result in poor machine efficiency and loss of time. With correct operation and maintenance, you will benefit from the technical know-how and experience that went into the design of the machine, and your mower will always work reliably.
TABLE OF CONTENTS:

CLAAS CORTO 3150 F Profil CORTO 275 F Profil Operator’s Manual – PDF DOWNLOAD

1 Machine description
2 Introduction
Introduction 21
3 Table of contents
4 Preface
Of special importance 41
Identification plate 41
5 Safety rules
Intended use 51
General safety precaution and accident
prevention regulations 51
Mounted machines 52
Trailed machines 53
PTO operation 53
Hydraulic system 53
Tyres 53
Maintenance 54
Noise level 54
Identification of warning and danger signs 54
Safety decals with warning symbols 55
6 Technical data
CORTO 3150 F Profil 61
CORTO 275 F Profil 61
Noise level 62
7 Assembly
Unloading/loading the machine 71
Unpacking the machine 71
Assembling the machine 71
Mounting the mower blades 72
First machine hitch-up 72
8 Before operation
Check every time before operation 81
Hitching up 82
Three-point hitching with quick coupler 82
Longitudinal compensation of mower 84
Adjusting the top link 84
Universal drive shaft 85
Adapting the length 85
Mounting the universal drive shaft 86
Permissible drive shaft angles 87
Weight relief 88
Parking the machine 810
Before transport 811
Road travel 812
Lighting bracket 813
9 Operation
Field operation 91
Working position 91
Transport position 92
Adjusting the working height 93
Adjusting the cutting height for uneven terrain 94
Weight relief 94
Adjusting the swath width 94
Putting the mower into operation 95
Notes on mowing 97
Environmental recommendations 98
Difficult working conditions 99
Accessory equipment 910
Skid plate extension for high cut 910
Slip yoke kit 910
Additional swath discs 911
Three-point booster 911
Mounting with lateral offset 912
10 Maintenance
Important maintenance instructions 101
Hydraulic system 101
Screws and bolts 101
Lubrication 101
Protective devices (guard frames) 101
Drives 102
Gear lubrication 102
Gear casing 102
Main gearbox 103
V-belts 104
Checking the V-belts 104
Tensioning the V-belts 105
Replacing the V-belts 105
Adjusting the cutting height 106
Mower blades 107
Replacing the mower blades 107
Mower blade holders 109
Spring adjustments 1010
Longitudinal mower compensation 1010
Adjusting the longitudinal compensation springs 1010
Transverse compensation of mowing unit 1011
Readjusting the transverse compensation 1011
Swath adjustment 1012
Universal drive shaft 1013
General notes on universal drive shafts 1013
Protective devices 1014
Threaded fasteners 1014
Fasteners 1014
Winter storage 1015
11 Lubricating chart
Safety rules 111
Lubricants 111
Lubrication 111
IMAGES PREVIEW OF THE MANUAL:

CLAAS CORTO 3150 F PROFIL CORTO 275 F PROFIL OPERATOR’S MANUAL – PDF DOWNLOAD:

PLEASE NOTE:

• This is not a physical manual but a digital manual – meaning no physical copy will be couriered to you. The manual can be yours in the next 2 mins as once you make the payment, you will be directed to the download page IMMEDIATELY.
• This is the same manual used by the dealers inorder to diagnose your vehicle of its faults.
• Require some other service manual or have any queries: please WRITE to us at [email protected]

S.M